Installation Instructions

SWIVEL(2)
NIPPLE(3)
TUBES(4)
COUPLING(5)
COUPLING(6)
STEM(7)
SOCKET(8)
NIPPLE(9)
RUBBER WASHER(10)
FLAT WASHER(15)
GLASS SHADE(11)
HEX NUT(12)
FINIAL(13)
CAP(14)
FLAT WASHER(17)
RUBBER WASHER(16)
NIPPLE (18)
INSTALLATION INSTRUCTIONS
1.Carefully remove the fixture out of the carton, and check that all parts are included referring to the
above illustration. Make sure not to misplace any parts that are needed for the installation;
2.Install the stem (7) into coupling (6). Then install flat washer (15) and rubber washer (10), glass shade
(11) rubber washer (16), flat washer (17) onto nipple (9), then secure them with hex nut (12).
3.Install the cap (14) onto nipple (9), then secure them with finial (13).
4.Assemble the tube (4) together using the nipple (18), then attach the bottom end of tube (4) into the
coupling (5) tightly. Then screw the nipple (3) into the tube (4).
5.Fixture is ready for lamping and installation.