ActivePERS TM Medical Alert and Activity Monitoring
PRODUCT DESCRIPTION TM ActivePERS is a battery powered, water resistant, medical alert transmitter designed for use with a smartphone and compatible TM apps (requires Bluetooth 4.0). ActivePERS is supplied with a magnetic clasp lanyard and is designed to be worn around the neck. TM ActivePERS is sealed to ensure water-resistance. TM IMPORTANT: ActivePERS will arrive in a low-power mode and will TM not function until activated and registered through an ActivePERS compatible app (see “Quick Start” below).
QUICK START TM ActivePERS will arrive in a mode designed to save power during TM shipping. In this mode, ActivePERS will not detect falls or send messages of any kind. TM To register ActivePERS : TM 1. Install and run an ActivePERS compatible app on your smartphone. For a list of compatible apps and devices see www.activepers.com. TM 2. Go to ActivePERS > My ActivePERS and click Register ActivePERS™ 3. Remove Pendant from Packaging 4.
USING ActivePERSTM The following instructions apply only to devices that have been activated and registered. TM Wearing ActivePERS : TM • ActivePERS should be worn around the neck like a necklace. TM The fall detection feature of ActivePERS will not work properly if TM ActivePERS is not worn around the neck. WARNING: ActivePERS LANYARD CLASP CONTAINS A RARE EARTH (NDFEB) MAGNET. NDFEB MAY INTERFERE WITH THE FUNCTION OF CARDIAC PACEMAKERS AND IMPLANTABLE CARDIOVERTERDEFIBRILLATOR (ICDS).
Sending an alert signal: TM • To send an alert signal press and release the ActivePERS button. TM The light on the front of the ActivePERS sensor will turn green when a message is successfully sent. Fall Detection: TM • When a fall is detected, the red light on the front of the ActivePERS sensor will start blinking (it may take up to 6 seconds for the light to start blinking after a fall). • The light will blink for about 15 seconds before sending an alert signal to the smartphone.
TECHNICAL SPECIFICATIONS • Dimensions: 2.1” x 1.4” x 0.6” • Enclosure Material: ABS plastic and silicone • Battery: Non-rechargeable Lithium battery • Battery Life: >1 year under normal usage • Water resistance: IPX5 – safe for showering and bathing • Weight: 1.0 oz. • Sensor: Accelerometer • Wireless: Bluetooth Low Energy (Bluetooth 4.
WARRANTY & DISCLAIMER Warranty: This device is not intended to be changed or modified by the user. Any changes or modifications to the device will void warranty and could void the user’s authority to use this device. For details please visit www.activepers.com/warranty TM Terms & Conditions: The use of ActivePERS is subject to the terms and conditions found at: www.activepers.
Copyright © 2016 BioSensics LLC. ActivePERS™ is a trademark of BioSensics. All rights reserved. Designed in Massachusetts by BioSensics. Assembled in the USA. US Patents #8,206,325, #9,005,141, and other patents pending.