User's Manual

User Manual

Active Personal Emergency Response System (ActivePERS)

Model Number: AP001

Introduction

ActivePERS is a personal emergency response pendant with patented and clinically

validated automatic fall detection algorithms developed by BioSensics, LLC. The key

features and benefits of the ActivePERS technology include detecting falls with clinically

validated and patented algorithms that virtually eliminate false alarms, monitoring the

number of steps taken hourly or daily, and notifying providers when the pendant is not

worn by the subscriber.

PAGE 1
User Manual Active Personal Emergency Response System (ActivePERS) Model Number: AP001 Introduction ActivePERS is a personal emergency response pendant with patented and clinically validated automatic fall detection algorithms developed by BioSensics, LLC.
PAGE 2
Activating Your Device The ActivePERS devices will arrive in a mode designed to save power while sitting on a shelf. In this mode, the sensors will not detect falls or send messages of any kind. To exit this mode and enter active mode, press and hold the button until the LED turns on, and then release the button. This will take three seconds. Once this occurs, the device will operate in its normal mode. NOTE: This is a one-time process and cannot be reversed. (i.e.
PAGE 3
Specifications       Dimension: 1.7” x 1.4” x 0.55” RF Transmission Frequency: 345MHz Operating Temperature: -30ºC to 60ºC Battery Type: CR2450 Lithium Battery Life: 1 year FCC ID: 2AA5H-AP001 FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received, including interference that may cause undesired operation.