Product Manual

1. Select the injection site and prep the skin as usual.
2. Hold ShotBlocker so that the blunt contact points touch the patient’s
skin at the injection site.
3. Press ShotBlocker FIRMLY against the skin. (A)
DO NOT MOVE OR REMOVE SHOTBLOCKER UNTIL
THE INJECTION HAS BEEN COMPLETED.
4. Immediately administer the injection in the usual manner through
or near the central opening of ShotBlocker. For subcutaneous
injections, angle the needle as needed to give the injection. (B)
IF MORE THAN 20 SECONDS ELAPSE BETWEEN THE
PLACEMENT OF SHOTBLOCKER AND THE INJECTION,
COMPLETELY REMOVE SHOTBLOCKER FROM THE SKIN.
REPEAT THE PROCESS BEGINNING WITH STEP 2.
5. After you have completed the injection and withdrawn the needle,
remove and discard ShotBlocker.
ShotBlocker® User Instructions
Phone: [phone]
Fax: [phone]
www.BionixMed.com
©2015 Bionix Development Corp.
Patented. • RM95-0800 • Rev. 10/19/15
A
B