SLIM TWO OWNER’S MANUAL
TABLE OF CONTENTS PRODUCT INFORMATION Safety Precautions...................................................4 Parts & Dimensions..................................................8 Product...........................................................................9 Remote Control........................................................10 PRODUCT INSTALLATION Product Installation..................................................11 PRODUCT OPERATION How to Use...................................................
SAFETY PRECAUTIONS IMPORTANT SAFEGUARDS • When using electrical products, especially when children are present, basic safety precautions should always be followed. READ ALL INSTRUCTIONS BEFORE USING • For use with 120V 60Hz: Power supply must be a 15 Amp GFCI outlet. WARNING - TO REDUCE THE RISK OF BURNS, ELECTROCUTION OR INJURY TO PERSONS: • Close supervision is necessary when this product is use by, on, or near children. • Use this product only for its intended use as described in this manual.
SAFETY PRECAUTIONS (CONT.) GROUNDING INSTRUCTION OPTIONAL GROUNDING INSTRUCTIONS DANGER- Improper use of the grounding plug can result in a risk of electric shock. This product has a three-prong grounding plug, which must be plugged into an outlet that is properly installed and grounded. In the event of an electrical short circuit, grounding reduces the risk of shock by providing an escape wire for the electrical current.
PARTS & DIMENSIONS PRODUCT ELONGATED TYPE 8 9
REMOTE CONTROL PRODUCT INSTALLATION 1. Remove the seat from the existing toilet body. • Release the nuts, and then remove the seat and cover. • Store the seat in a proper place for future use. • Turn off the water. 10 2. Install the T-Valve. • Remove the existing water hose and then install T-valve to the bottom of the toilet tank. Ensure the rubber washer is properly seated and attach the original water hose to the T-Valve.
PRODUCT INSTALLATION (CONT.) 3. Fix the bracket onto the toilet. 4. Push the main body toward the catch plate completely. 7. • Point the arrow on the catch plate towards the toilet tank. • Push it until you hear a “click”. • Insert the included batteries inside the battery compartment. • Plug in and be sure that the nozzle comes out and retracts when powered on. • Identify a location in the bathroom for the remote control that is visible and reachable from the toilet.
HOW TO USE 1. Sit On The Toilet Seat 2. Wash, Bidet, Turbo 3. Massage 4. Child Function • Selected function can be used as described. • When pressing the Massage button during the operation of Wash, Bidet, and Turbo, water pressure will repeat high and low for smooth pulsating wash. • When selecting Child Function, settings adjust to low pressure. Seat sensor • Be sure to sit on the seat sensor. If the sensor is not occupied, all functions will not operate.
HOW TO USE (CONT.) 5. Nozzle Position Control 6. Water Pressure Control 7. • Nozzle position is adjustable (5 levels). • Water pressure is adjustable. (5 levels) • All operations will stop. • If the water or screen filters become blocked, it may cause low water pressure. Regularly check the water and screens filters. Stop • When pressing the stop button for 3 seconds, unit will turn off. • Press any of Stop, Wash, Bidet, or Turbo to turn on. 8.
HOW TO USE (CONT.) 9. Energy Saving Function • ECO 1 - This mode will be activated by pressing the Energy Saving button until the yellow LED light turns on. (Seat and water temperature will be kept at 32°C) • ECO 2 - This mode will be activated by pressing the Energy Saving button until the green LED light turns on. • ECO OFF - Press the Energy Saving button until LED light turns off.
HOW TO USE (CONT.) 13. Sitz Bath 14. Seat Sensor Bypass 15. Reset Using Inline Carbon Filter Use of external water filter is only recommended in areas with known hard water issues. • Wash or Bidet is switched to Wash Sitz Bath or Bidet Sitz Bath if Nozzle Cleaning button is pressed during use. • The seat sensor can be activated and deactivated by pressing Massage button for 3 seconds.
MAINTENANCE & CLEANING Screen Filter Cleaning Maintenance During Winter Cleaning the Unit Draining of Remaining Water OR Screen filter Water supply hose 1. Close the water valve. 2. Disconnect the water supply hose. Take the screen filter out and clean it with a soft brush. 3. Return the filter after cleaning and reconnect the water supply hose. 4. Open the water valve. • When bidet seat is not used for an extended period of time, unplug and drain the unit. 1.
SETTINGS TROUBLESHOOTING USER SETTING WITH THE REMOTE CONTROL PLEASE CHECK THE FOLLOWING POINTS BEFORE REQUESTING REPAIR SERVICE. Seat sensor ‘off’ Seat sensor ‘on’ No. Seat Status 1 2 3 Function Silent mode Seat sensor bypass Night light Switch Operation Description “ ” For longer than 3 seconds To turn on/off the operating chime sound. “ ” For longer than 3 seconds Seat sensor feature will be deactivated. “ ” For longer than 3 seconds To turn on/off the night light.
SPECIFICATIONS WARRANTY ITEM SLIM TWO 1 YEAR WARRANTY Rated voltage 120V, 60Hz Max. Power consumption 870W Bio Bidet warrants its products to be free from manufacturing defects under normal use and service for a period of 1 year from the date of purchase. This warranty is extended only to the original purchaser. Power cord length 1.2 m For full warranty details, visit www.biobidet.com Water feed method Directly connected to water pipe Recommended inlet water pressure 99~106.
Thank You Technical Support/Customer Service 7900 S Route 31 Crystal Lake, IL 60014 T: 847.458.2334 U.S TOLL FREE: 877.339.5214 support@biobidet.com www.biobidet.