User’s Guide MBP20 Baby Monitor The features described in this user's guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP20. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Parent unit 1 9 8 7 2 3 5 4 6 1 LCD Display 2 Link Indicator On when the parent unit is powered on and linked to the baby unit. Flashes when the parent unit is out of range from baby unit. Off when the parent unit is powered off. 3 UP / Volume + In idle mode: Press to increase the speaker volume. In menu mode: Press to view the previous menu item. 4 Menu / OK In idle mode: Press to access the main menu. In menu mode: Press to access the sub-menu, or confirm the settings.
9 Charging Indicator On steadily when in charging mode. Indicates when speaker of parent unit is muted. Indicates the speaker volume level of parent unit. Flashes when low battery is detected. NOTE Off even if connected with power adapter but without battery pack installed. Parent Unit Display Indicates when parent unit or baby unit is playing lullaby. Indicates when timer alarm is activated. Indicates when the sound alert is set on. Low battery, needs charging.
Overview of your Baby unit 1 2 3 4 1 5 2 6 7 3 9 5 8 7 8 4 6 9 Infrared Light Camera Power Indicator On when the baby unit is switched on. Off when the baby unit is switched off. UP / Volume + Press to increase the speaker volume. Power Press and hold to power on/off the baby unit. DOWN / Volume Press to decrease the speaker volume. Stop Press to stop the lullaby playing. Play Press to play the lullaby. Lullaby Press to select the lullaby and start playing the selected lullaby.
Important guidelines for installing our Baby Monitor • To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. • Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic doors or reinforced concrete, between the baby and parent unit may block the radio signal.
1. SAFETY INSTRUCTIONS ................................... 8 2. GETTING STARTED............................................ 9 2.1 Baby unit power supply.......................................9 2.2 Parent unit battery installation.............................9 2.3 Belt clip on parent unit ......................................10 3. USING YOUR BABY MONITOR........................ 11 5. 6. 7. 8. 9. DISPOSAL OF THE DEVICE (ENVIRONMENT) . 15 CLEANING.........................................................
1. SAFETY INSTRUCTIONS WARNING: STRANGULATION HAZARD - Keep the adapter cord out of baby's reach. NEVER place the baby monitor or its cord within the crib. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use.
2. GETTING STARTED 2.1 Baby unit power supply 2.2 Parent unit battery installation The parent unit comes with battery pack. Charge the parent unit before you use it for the first time or when the parent unit indicates that the battery is low. DC JACK Battery JACK DC PLUG Battery PLUG 1. Insert the power adapter with smaller pin plug into the side of the baby unit, as shown. 2. Connect the other end of the power adapter to the mains socket. NOTE Only use the provided power adapter. GETTING STARTED 1.
3. Insert the supplied battery pack, and fit the battery pack into the compartment. 2.3 Belt clip on parent unit 4. Reattach the battery compartment cover, and reinstall the belt clip (refer to section 2.3). 5. Insert the power adapter with bigger pin plug into the side of the parent unit. 6. Connect the other end of the power adapter to the mains socket. 7. The Charging Indicator comes on. NOTE Only use the provided power adapter. 1. Attach the belt clip to the lock slots on the back sides. 2.
3. USING YOUR BABY MONITOR 3.3 Please read these instructions carefully, and be reminded that this baby monitor is just intended as an aid. It is not a substitute for responsible, correct parental supervision. There are 5 volume levels on the baby unit, and 6 levels on the parent unit, including VOLUME OFF. The volume level of parent unit will be shown on the status bar when you adjust the volume. 3.1 Power on/off the parent unit 1.
3.4.1 Adjust talk back volume The baby unit has 5 volume levels from Level 1 to Level 5. During Talk Back, press > or < on the baby unit to increase or decrease the volume respectively. NOTE If lullaby is playing before talkback starts, the lullaby playback will be paused. After finished talking back, it will play the lullaby from the beginning again. 3.5 Temperature The baby unit constantly monitors the temperature in your baby's room.
NOTE Even if another parent unit does not display video, but it will still monitor the audio transmission from baby unit. To switch the video feed to the other parent unit which is not in video monitoring mode: 1. Press 6 on the parent unit which is in video monitoring mode, the screen will be blank without video transmission. 2. Press 6 on the other parent unit which is NOT in video monitoring mode, the video feed will be switched to the other parent unit. 4. Parent unit settings 4.1 Set the language 1.
4.2.2 Set the timer 1. Repeat steps 1 to 3 in section 4.2.1. 2. Press + or - to select SET TIMER. 3. Press 1 and then enter the hour and minute. 4. Press 1 to confirm. NOTE When the countdown timer reaches, an alert will emit with timer icon and 00:00 shown on the screen. Press any key on parent unit to stop the alert. 4.3 Set the brightness 1. Press 1 to access main menu. 2. Press + or - to select BRIGHTNESS. 3. Press 1 to enter the sub-menu to set the brightness level. 4.
4.6 Reset You can restore all the adjustable settings back to their original factory settings. 1. Press 1 to access main menu. 2. Press + or - to select RESET. 3. Press 1 and display will show CONFIRM?. 4. Press 1 to confirm. The unit will reset and back to idle automatically. 5. DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product lifecycle, you should not dispose of this product with normal household waste.
6. CLEANING 7. TROUBLESHOOTING Clean MBP20 with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Link light on the parent unit does not come on Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP20 away from hot, humid areas or strong sunlight, and do not let it get wet.
• Battery pack in parent unit is running low. Connect the parent unit to the mains power with the supplied power adaptor for recharging. Cannot view the video image of baby from the parent unit • Video feed maybe turned off. Activate the video feed by pressing 6. • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1.5 meter. • Battery pack in parent unit is drained.
8. GENERAL INFORMATION If your product is not working properly... 1. Read this User's Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at US and Canada 1-888-331-3383 To order a replacement battery pack for parent unit, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. This device complies with Industry Canada licence-exempt RSS standard(s).
9. TECHNICAL SPECIFICATIONS RF frequency band 1921.536 MHz – 1928.448 MHz Channels 5 Operating temperature 5ºC to 45ºC Baby unit voltage 100 – 240V (AC voltage, 50/60Hz) Baby unit voltage (Adapter output) 6V DC, 600mA Parent unit voltage 2.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Mobility, Inc. All rights reserved. Version 1.