Home Stereo Audio Gateway Quick Guide Product Layout Front V ie w Re a r V iew 1
Instruction: Bluetooth Home Audio Gateway (We’ll call that as “Audio Gateway” on the below) allows you to connect your music with your Bluetooth headset, home stereo system or to receive the audio from other device. The Audio Gateway is compatible with any stereo, A/V, portable audio or music enabled mobile device that supports 3.5mm stereo transmission or receive of audio. Specification: z z z z Main Chipset: CSR BC03 Bluetooth v1.
LED Indicator (Tx mode--Audio Transmitter ) LED Indicator LED Indicator 1 (Green) LED Indicator 2 (Blue) On Flashing X X On Flashing On X Action Connecting to the last paired device Pairing / Searching Connecting and streaming Idle Mode LED Indicator (Rx mode--Audio Receiver ) LED Indicator LED Indicator 1 (Green) LED Indicator 2 (Blue) Flashing On X Flashing X X Action Pairing / Searching Connecting and streaming Idle Mode T op V ie w Before using your Audio Gateway Before using your Audio Gatew
Connecting my Audio Gateway on Transmitter mode If you want using the Audio Gateway on Transmitter mode, you must pair it with a Bluetooth enabled headset or other device prior to usage. The “Pairing” process creates a unique wireless link between two devices. Once paired the communications between the paired devices does not need any further authentication or authorization.
. Once pairing is successful between the Audio Gateway (on Receiver mode) and the Bluetooth device, the Audio Gateway will exit the pairing mode and will be ready to use. 6. Please create the connection by right click on the icon in the Bluetooth application if you’re using a Bluetooth on PC/laptop to connect with the Audio Gateway. 7. After the connection between Audio Gateway and the Bluetooth device, the LED indicator 1(Green) will be steady turning on at the same time. 8.
FCC statement in User's Manual (for class B) "Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Caution: 1.The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. A minimum distance of 20cm between the radiator and your body shall be maintained. 3.