User's Manual

ManualsBrandsBillionton Systems ManualsElectronicsPCI-Express Mini Card USB Interface802.11BG Module

MINICARD

WIRLESS LAN ADAPTER

Caution and Notes before using

• Do not disassemble, repair, or modify the unit. It may cause damage, or

accident.

• Keep away from heat & flame or humid environment.

• To avoid risk of electrical shock, not do the plug and unplug operations with wet

hands.

• Keep the unit out of the reach of young children. If a child swallows battery,

cover, or screw, consult a doctor immediately.

Product detail

- Support System: Microsoft Windows 98/98SE, ME, 2K & Windows XP

- USB2.0 MiniCard ( Mini PCI Express bus )

- Dimension: 50.95 x 30 x 1 mm (L x W x H)

- Compatible with IEEE 802.11b/g Standard

- 2.4GHz spread specturm technology

- 54Mbps high speed transfer rate and backward compatible with 802.11b

- Support 64/128-bit WEP Data Encryption function for high level of security

- Support WPA and WPA2 advanced WLAN Security.

- Supports peer to peer communication among any wireless users, no Access Point

required.

- Support Quality of service(QOS)802.11e,WMM

- Support antenna diversity

- Packet- OVERDRIVE technology

- Software Range OVERDRIVE technology

- Certification: FCC, CE class B, RoHS-2002/95/EC (Green Certification)

Quick Guide

Summary of content (6 pages)

PAGE 1
MINICARD WIRLESS LAN ADAPTER Quick Guide Caution and Notes before using • • • • Do not disassemble, repair, or modify the unit. It may cause damage, or accident. Keep away from heat & flame or humid environment. To avoid risk of electrical shock, not do the plug and unplug operations with wet hands. Keep the unit out of the reach of young children. If a child swallows battery, cover, or screw, consult a doctor immediately.
PAGE 2
Setup for Windows 1. Make sure your PC is powered on and that you are running the Windows operating system. 2. Insert the driver CD into the CD-ROM drive. The CD will automatically start the installation or you can select the proper setup program file from the CD manually. 3. The setup wizard will help you to finish the installation. The installation will install the application on the background, Please wait until the application finish for disappear. 4. Reboot the PC to let the application effect. 5.
PAGE 3
7. Please double click on the icon when the Utility window appeared, slide to “Advanced” and check “TxBURST” &”Enable TCP Window Size” then click on “Apply” to finish the Utility setting change. Now the USB wireless Adapter is ready for use. * Note: Enable “TxBURST” & “TCP” will give user high performance of the connection and the device will still works even if user did not check these two columns. 9. On the “Site Survey” column, you can monitor the link status.
PAGE 4
*Note: If user wants to link with an Encryption network, the client network will ask the WEP/WPA (Web Golden Key) for the connection, please key in the pass word to connect it. *Note: For Windows XP SP2 users have to disable the Windows wireless network setting configure function manually. Step by Step: Go to Start> Setting> Network Connections> On the “Wireless Network Connection” icon Right Click the mouse> select Properties> Wireless Networks>Unmark the”Use Windows to configure……Settings” item.
PAGE 5
FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 6
This device is intended only for OEM integrators under the following conditions: 1)The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required.