Home Stereo Audio Gateway (With i-Pod controlled) Quick Guide Product Layout Front V ie w Re a r V iew 1
Instruction: This Bluetooth™ Audio Transmitter, enabling Home Sound Systems (Hi-Fi) to broadcast music transmissions by Bluetooth technology. The unit connects to your home stereo via 3.5mm audio outputs. Power-ON the unit and it will start paring with your Bluetooth transmitter. Now you can enjoy the music which from your Bluetooth enable computer or iPod by your Home Sound Systems (Hi-Fi). On the below instruction, we’ll call the product short for “Audio Gateway”.
LED Indicator (Tx mode--Audio Transmitter ) LED Indicator LED Indicator 1 (Green) LED Indicator 2 (Blue) On Flashing X X On Flashing On X LED Indicator 1 (Green) LED Indicator 2 (Blue) On X Action Connecting to the last paired device Pairing / Searching Connecting and streaming Idle Mode LED Indicator (SPK mode—Speaker ) LED Indicator Action Working T op V ie w Before using your Audio Gateway Before using your Audio Gateway, Please check the mode switch on the Audio Gateway, the switch could swit
Connecting my Audio Gateway on Transmitter mode If you want using the Audio Gateway on Transmitter mode, you must pair it with a Bluetooth enabled headset or other device prior to usage. The “Pairing” process creates a unique wireless link between two devices. Once paired the communications between the paired devices does not need any further authentication or authorization.
Note!! while connecting my Audio Gateway with i-Pod 1. If you connect the PC with the Audio Gateway using the USB cable, the i-Pod may not play music by the PC synchronization, to go the playing mode, please disconnect the connection by safe-removed. 2. While you connect the I-Pod with the Audio Gateway, the I-Pod could charge from the Audio Gateway and play the music at the same time. 3.
FCC statement in User's Manual (for class B) "Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Caution: 1.The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3.