Product Info

DC 5VOFF ON
4
5
2
3
(1)Switch on and off: Press and hold for 1
second to turn on the microphone, and long
press for 2 seconds to turn off the microphone.
(2)Volume adjustment: short press the power
button to adjust the volume, there are 5 levels
in total, the minimum is 1 level, each time the
power button is pressed, it increases by one
level, and it cycles between 1 and 5.
(3)Frequency conversion adjustment: "3-click"
the power button to adjust the frequency, a
total of 15 levels, each "3-click" power button
increases by one level, and cycles between 1
and 15.
(4)Frequency lock operation: In the "frequency
lock" off state, long press the power button for
"15 seconds" to automatically turn on and the
antenna symbol flashes to indicate that the
code is being matched.When the antenna
symbol is always on, it means that the
frequency lock is completed. After the
frequency lock is completed, you must restart
the machine to save the pairing file. In the
"de-frequency" off state, press and hold the
power button for "15 seconds" to automatically
turn on and the antenna symbol flashes to
indicate decoding. When the antenna
symbol is always on, the de-frequency is
completed. After the de-frequency is
completed, the machine must be restarted to
save the de-frequency. document.
(1)When charging in the off state, the charging
indicator lights up in red, and the light goes
out when fully charged.
(2)When charging in the power-on state, the
battery cursor blinks and the battery is fully
charged.
(1)In the display state, click the power button
to increase the volume cycle.
(2)When the screen is off, click the power
button to trigger the bright screen, and click
the second time to adjust the volume.
(3) When there is interference in the same
frequency band with other devices or the
environment interference is large, the
frequency of the microphone can be adjusted
by "3 clicks", there are 15 channels in total.
Normally no need to adjust the frequency.
(4) When the frequency is adjusted, the
receiver A or B indicator will flash, and after
the frequency is paired, it will return to
steady light.
An external DC 5V/2A power charger is used
to charge the microphone.
4
5
2
3
DC 5VOFF ON
6 7
A B
External DC 5V power supply to charge
the receiver
Plug into the 6.3mm MIC input of the amplifier
The receiver can be inserted into the sound
reinforcement equipment with only 3.5mm MIC
through the adapter.
Lights up to indicate that the transmitter and
receiver are successfully connected.
Lights up to indicate that the transmitter and
receiver are successfully connected.
The flashing light indicates that the
connection signal is unstable. Please
shorten the distance between the
microphone and the receiver to reduce
space obstacles.
The flashing light indicates that the
connection signal is unstable. Please
shorten the distance between the
microphone and the receiver to reduce
space obstacles.
The light is always on when charging, and
turns off when fully charged
(1)Please charge when the receiver cannot
be turned on.
(2)Ensure that the battery is charged at
least once a month when it is not used for
a long time to ensure battery activity.
(1)Conventional computer USB ports,
power banks, USB charging heads, etc.
can be used to charge this product. It is
recommended to use DC5V 2A power
supply equipment to charge this product.
(2)Choose a 5V 2A charger, which can be
fully charged in 2.5H. If the current is too
small, the charging time will be prolonged.
(1)Turn the switch to "ON" to turn on the device.
(2)Turn the switch to "OFF" to turn off the device.
DC 5VOFF O NDC 5VOFF O N