a Company OWNER’S MANUAL Model RtR-EV1200 12˝ 475-Watt Front-Firing Powered Subwoofer SPECIFICATIONS Woofer 12˝ Custom Eviction Series Woofer with High Power Magnet Power 475 Watts Peak, BASHꢀDesigned Amp Frequency Response 25Hz - 200Hz Variable/Adjustable Crossover 40Hz - 180Hz Features • Gold-plated Speaker Level Inputs • RCAꢀInput & Phase Switch • Adjustable Volume, Auto On/Off • Flared Port Dimensions 17˝ H x 143/4˝ W x 171/2˝ D Finish MDFꢀBlack Vinyl Cabinet Limited Warranty 5 years on driver, 2 year
NO USER SERVICEABLE PARTS ARE INSIDE. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Congratulations on your purchase of an RtR-EV1200 powered subwoofer. It will give your stereo system unparalleled low frequency output! Bass frequencies are critical to realistic sound reproduction. After you’ve hooked up your RtR-EV1200, you will discover just how much punch and depth you’ve been missing. No matter what kind of music or videos you listen to… whether you listen to them loud or soft, you will experience sound that is richer and fuller. Bass guitar and string bass will have more impact.
RtR-EV1200ꢀAMPLIFIERꢀPANEL 1) Power Indicator LED 2) Power Auto-On Switch 3) Phase Switch 11) High Level Inputs from Amplifier 4) Volume Control 5) Crossover Frequency Control 10) Out to Speakers 6) Sub RCA Input 7) Crossover Switch 8) Power Input RISK OF FIRE REPLACE FUSE AS MARKED 9) Removable Fuse Holder (5 x 20mm, 1.
RtR-EV1200ꢀAMPLIFIERꢀPANEL 1. POWER INDICATOR LED – When the subwoofer is ON, this LED light will be green. When the subwoofer is in the STANDBY mode, it will be red. 2. POWER/AUTO ON SWITCH – This toggle switch turns the subwoofer on and off. When the switch is in the OFF position, the subwoofer will not play. When the switch is in the ON position, the subwoofer will stay on at all times. When the switch is in the AUTO position, the subwoofer will automatically come on when bass frequencies are fed to it.
SUBWOOFER CONNECTION - METHOD A Connecting to Receivers with a SUBWOOFER or LFE Output Jack All Dolby Digital, DTS, THX, and Bass Management equipped receivers have a low level SUBWOOFER or LFE output jack. If you have this, you will use the METHOD A connection as shown below in Drawing C. This is the recommended and easiest connection. If your receiver does not have a low level SUBWOOFER or LFE output jack, you will use METHOD B (Drawing D) on Page 7 to connect your subwoofer to the receiver.
SUBWOOFER CONNECTION-METHOD B 7 Connecting to Receivers with NO SUBWOOFER or LFE Output Jack If your receiver does not have a low level SUBWOOFER or LFE output jack (for example, older Dolby Pro Logic receivers or stereo-only integrated amps), you will use the method shown below in Drawing D to connect your subwoofer to the receiver.
INITIAL LISTENING TEST It’s now time to test the RtR-EV1200 subwoofer in your listening environment. 1. Before turning your stereo system and subwoofer on, double-check all connections. 2. Turn the volume controls on both the subwoofer and your audio receiver all the way down (fully counterclockwise) and check that the PHASE SWITCH is set to 0° and CROSSOVER SWITCH is set to the proper setting (see Page 5, #7). 3.
TROUBLESHOOTINGꢀGUIDE 10 If you are having a problem with your subwoofer, please read through this “Trouble Shooting Guide”. Many times problems are actually caused by other items in the system or the subwoofer’s interaction with those items. These problems can easily be resolved with this guide. Problem 1) HUMMING OR BUZZING NOISE Cause Solution You have a Ground Loop or problem with other equipment. This causes the vast majority of hum related complaints.
Problem 4) NO OUTPUT FROM SUB Cause AC power is not getting to the amplifier. LED DOES NOT LIGHT UP • Make sure the switch on the back of the sub is in the “ON” position. • Check that you are using the correct power cord and that it is plugged in securely at both ends and make sure that the AC outlet the subwoofer is plugged into is working. Try another power cord. Fuse is blown or subwoofer amplifier is not working.
CARING FOR YOUR RtR-EV1200 SUBWOOFER The RtR-EV1200 enclosure is finished in a very high quality polymer laminate covering that is both attractive and excellent protection for the wood cabinet. To remove dirt or fingerprints use a damp, soft cloth. You may also use high-quality furniture polish on the wood laminate to maintain the original luster. WARRANTY INFORMATION We suggest that you read the LIMITED WARRANTY completely to fully understand your warranty/service coverage.