AudiaEXPI & AudiaEXPO Input & Output Expanders Operation Manual Biamp Systems | 9300 S.W. Gemini Drive | Beaverton, OR | 97008 | USA | +1.503.641.7287 | www.biamp.
AudiaEXPI & AudiaEXPO TABLE OF CONTENTS Bl ank AudiaEXPI - front & rear panels pg. 2 AudiaEXPO - front & rear panels pg. 3 Applications pgs. 4~11 Specifications pg. 12 Block Diagrams pg. 13 Warranty pg. 14 CE Declaration pg. 15 Safety Information pgs.
AudiaEXPI & AudiaEXPO INTRODUCTION AudiaEXPI is an input expander for AUDIA®, the benchmark in digital audio systems for demanding professional sound installations. AudiaEXPI accepts eight mic/line analog audio inputs and provides eight channels of digital audio output via CobraNet®. AudiaEXPI can simply add inputs to a centralized system, or it can extend system boundaries by providing inputs in remote locations.
AudiaEXPI - Front & Rear Panels Peak Indicators (Inputs 1~8): These red LEDs will light whenever input channel signal levels reach +14dB (6dB below clipping). Use this feature to aid in the adjustment of the Trim controls (see below). Trims (Inputs 1~8): These screw-driver adjustable controls set the channel input gain (0dB ~ +60dB) to compensate for different source levels. This gain range will accomodate most microphone or line level signals.
AudiaEXPO - Front & Rear Panels Levels (Outputs 1~8): These screw-driver adjustable controls set the channel output gain (-70dB ~ 0dB) to provide appropriate signal levels to any subsequent audio equipment. Rotary Encoder & LCD Display: This control and display are used for initial setup of the AudiaEXPI unit. When power is first applied to the unit, the display will cycle through a product description, followed by a title screen. Press the control to enter setup.
APPLICATIONS Hotel with Sound Reinforcement in Multiple Banquet/Conference Rooms This application demonstrates the use of AUDIA in a hotel conference/banquet facility. This is a networked system using one AudiaFLEX 10x12CM unit and three AudiaEXPI 8-Input Expander units (forty-two inputs, twelve outputs, CobraNet). An example system diagram is shown on the next page. Each room has four microphones and two stereo line inputs, which are connected to an AudiaEXPI located within the room.
APPLICATIONS AudiaEXPI BIAMP SYSTEMS ~ 27V 50/60 Hz mic/line inputs designed and assembled in the USA www.biamp.com logic inputs primary in use / conductor 8 secondary 7 6 5 4 3 2 1 link / activity LEDs 25 watts class 2 wiring U.S. pat. no. 4,922,536 1 2 3 4 5 6 7 8 CobraNet® connections only Room A inputs stereo inputs 1&2 microphone inputs 1~4 AudiaEXPI BIAMP SYSTEMS mic/line inputs designed and assembled in the USA www.biamp.
APPLICATIONS Courthouse with Multiple Courtrooms and Hard-Disk Court Recording This application demonstrates the use of AUDIA in a modern courthouse. This is a networked system using two AudiaFLEX 20x4CM units and two AudiaEXPO 8-Output Expander units (forty inputs, twenty-four outputs, CobraNet). An example system diagram is shown on the next page. Each courtroom is shown as having ten microphones.
APPLICATIONS AudiaEXPO BIAMP SYSTEMS line outputs designed and assembled in the USA www.biamp.com ~ 27V 50/60 Hz logic inputs primary in use / conductor 8 secondary 7 6 5 4 3 2 1 link / activity LEDs 25 watts class 2 wiring U.S. pat. no. 4,922,536 1 2 3 4 5 6 CobraNet® connections only 7 8 Court B Court A recorder recorder remote control option: switch assignment of courtrooms/recorders AudiaEXPO BIAMP SYSTEMS line outputs designed and assembled in the USA www.biamp.
APPLICATIONS Hospital with Multiple Zones of Paging, Messaging, and Background Music This application demonstrates the use of AUDIA in a multi-zone hospital building. This is a networked system using one AudiaFLEX 8x8CM unit and three AudiaEXPO 8-Output Expander units (eight inputs, thirty-two outputs, CobraNet). An example system diagram is shown on the back page.
APPLICATIONS AudiaEXPO BIAMP SYSTEMS ~ 27V 50/60 Hz line outputs designed and assembled in the USA www.biamp.com logic inputs primary in use / conductor 8 secondary 7 6 5 4 3 2 1 link / activity LEDs 25 watts class 2 wiring U.S. pat. no. 4,922,536 1 2 3 4 5 6 CobraNet® connections only 7 8 MCA8050 4th Floor speaker zones 8 7 6 5 4 3 2 1 AudiaEXPO BIAMP SYSTEMS line outputs designed and assembled in the USA www.biamp.
APPLICATIONS Theater with Live Mixing Console and Multiple Speaker Zones This application demonstrates the use of AUDIA in a live-performance theater. This is a networked system using one AudiaFLEX 2x8CM unit, three AudiaEXPI 8-Input Expander units, and two AudiaEXPO 8-Output Expander units (twenty-six inputs, twenty-four outputs, CobraNet). An example system diagram is shown on the back page.
APPLICATIONS AudiaEXPI BIAMP SYSTEMS ~ 27V 50/60 Hz mic/line inputs designed and assembled in the USA www.biamp.com logic inputs primary in use / conductor 8 secondary 7 6 5 4 3 2 1 link / activity LEDs 25 watts class 2 wiring U.S. pat. no. 4,922,536 1 2 3 4 5 6 7 8 CobraNet® connections only from Stage mics 1~8 AudiaEXPI BIAMP SYSTEMS ~ 27V 50/60 Hz mic/line inputs designed and assembled in the USA www.biamp.
SPECIFICATIONS AudiaEXPI SPECIFICATIONS Frequency Response (20Hz~20kHz @ -20dBFS): +0/-0.4dB Maximum Input (mic/line): THD+N (20Hz~20kHz @ -20dBFS): Phantom Power: line level (0dBu) mic level (-60dBu) < 0.006% < 0.
BLOCK DIAGRAMS AudiaEXPI BLOCK DIAGRAM LCD & encoder Processor Analog Inputs Trim & Peak CM-1 A/D Logic Inputs CobraNet digital audio AudiaEXPO BLOCK DIAGRAM LCD & encoder Processor Analog Outputs Trim CM-1 D/A 13 Logic Inputs CobraNet digital audio
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems dealer, subject to the terms and conditions set forth below. 5.
DoC EXP201003 EC Declaration of Conformity Biamp Systems Corporation, as manufacturer having sole responsibility, hereby declares that the following described product complies with the applicable provisions of the DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration. Product Models: EXPI, EXPO Product Description: Input and Output Expanders for networking with audio DSPs.
16
17
18