OPERATING INSTRUCTIONS Quinta Digital Wireless Conference System
Qinta – Contents 2 1. Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1.1 Quinta CU Control Unit / Quinta Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1.2 Quinta MU Microphone Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1.3 Disposal . . . . . . . . . . . . . . .
Quinta – Safety Instructions 3 Thank you for selecting the digital wireless Quinta conference system. Please take some time to read carefully through this manual before setting up the equipment. 1. Safety Instructions 1.1 Quinta CU Control Unit / Quinta Charger 1. 2. 3. 4. 5. 6. 7. 8. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth.
Quinta – Safety Instructions 4 Switching off • In order to switch off the device disconnect the power plug from the power socket. Disconnect • For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. Maintenance • Only clean the equipment with a slightly damp or dry cloth. Never use solvents as these damage the surface. Troube shooting and servicing • Do not open the equipment without authorisation. You could receive an electric shock.
Quinta – Control Unit 2. 5 Quinta CU Control Unit The Quinta CU control unit is the heart of the system. It controls the delegate and chairman microphone units. With one control unit a maximum of 4 speakers (e.g. 3 delegates and 1 chairman) can speak simultaneously. The radio transmission is in the triple band (2.4 / 5.2 / 5.8 GHz frequency band). The control unit has been designed for installations on tables or 19" rack mounting.
Quinta – Control Unit 2.2 • • • • 2.3 6 Where to Place the Control Unit If you do not use remote antennae, place the Quinta CU control unit in the room where the meeting takes place. If you use remote antennae, place the antennae in the conference room. Avoid shadowing effect of the antennae, especially by metallic surfaces. A free line of sight between the Quinta MU microphone units and the antennae of the Quinta CU control unit is essential for the operation of the microphone units.
Quinta – Control Unit 2.4 • • • • 7 Audio Connection If required, connect the Audio Mix , XLR or Cinch master output of the Quinta CU control unit to the input of a mixing console or amplifier. If you want to feed the audio signals into a network, connect the AVB connection * to the network by using a CAT5 cable. You can also connect other audio sources or devices with AVB connection, which are defined as “Talker” (e.g. microphone) or “Listener” (e.g.
Quinta – Control Unit 2.7 • • 8 How to Switch the Control Unit On/Off Turn on the Quinta CU control unit with the On/Off switch . The Power on LED will illuminate. The channel LED 1 to 4 will illuminate white to indicate the availability. As soon as a microphone is activated, the channel LED will illuminate red to indicate that the channel is occupied. • • At the factory the RF bands 2.4; 5.2 or 5.8 GHz* will be activated (Automatic Mode).
Quinta – Microphone Units 3.
Quinta – Microphone Units Quinta MU23 Chairman Microphone Unit 10 Quinta MU22 Double Delegate Microphone Unit ! " ! Opening for unlocking the gooseneck microphone Connection for gooseneck microphone Loudspeaker “Clear” button to clear all delegate microphone units Microphone button Programmable function button Reset button to restart the integrated microcontroller (refer also the item “Microphone unit cannot be switched off” in chapter 7.
Quinta – Microphone Units 3.3 Switching On / Off How to switch on and allocate the microphone units • The microphone unit is switched on by pressing the microphone button. The microphone button will light up for a moment and the operating control LED on the rear will illuminate green. When the connection to the Quinta CU control unit has been established, the buttons of the microphone unit will illuminate white.
Quinta – Microphone Units 3.4 • • • 3.5 • • 3.6 12 Powering / Operating Time The microphone units have an integrated rechargeable battery allowing a minimum operating time of 20 hours when fully charged. When the battery charge is too low for a satisfactory operation, the operating control LED on the rear of the microphone unit will flash. The remaining time of operation will be around 60 minutes.
Quinta – Microphone Units 13 3.6.4 Voice Activation Mode • If the microphone units operate in the Voice Activation mode, the microphone units are switched on via voice control. That is the microphone unit is switched on as soon as someone speaks into the microphone. In this case it is not necessary to press the microphone button. Important: The threshold and the hold time can be configured with the “Quinta Conference” software for all microphone units. 3.7 • • • • 4.
Quinta – Microphone Units 4.2 14 Programmable Function Button of the Chairman Microphone Unit Quinta MU23 Depending on the configuration the following functions are possible with the function button !: mute, clear or priority. The function button can be configured via the control unit with the Quinta Conference software. 1. Normal All active delegate microphone units will be cleared and the microphone of the chairman unit will be switched on.
Quinta – Microphone Units 4.3 • • • • • Request-to-Talk Mode 15 Quinta MU22 Double Delegate Microphone Unit This operating mode is only possible in conjunction with a PC using the Quinta Conference software or a media control system (AMX®, Crestron®, Cue etc.). The request-to-talk is registered in the system by pressing the microphone button of the microphone unit. The allocation is made by the operator at the PC or touch screen of the media control system.
Quinta – Charger 5. 16 Quinta CD 2 Charger in the Quinta CC 2 | CC 2 / 600 Case Quinta CC 2 is a modular charging and transport case. The basic version the Quinta CC 2 consists of a top cover (Quinta CT 2), a charger (Quinta CD 2) for 10 microphone unit and a bottom with casters (Quinta CW 2). This version is suitable for microphone units using the Classis GM 313 Q, GM 314 Q and GM 315 Q microphones.
Quinta – Trouble Shooting 6. • 17 Battery Charging with External Mains Power Adapter The Quinta MU microphone units can also be charged with the external CA 2458 mains power adapter, which is connected to the DC socket . The operating control LED will indicate the charging process: LED indicator when the batteries are recharged: a) LED is flashing red. . . . . . . . . . . . . . . . Battery is charged b) LED illuminates red permanently . . . . .
Quinta – Trouble Shooting 18 Problem Possible Cause Solution Allocation is not possible • All channels are occupied • Check the number of open microphones (NOM) with the Quinta Conference Software or Quinta Web Server • Microphone unit is not within the range of the control unit • Switch off an activated microphone • If possible increase the NOM with the Quinta Conference Software or the Quinta Web Server • Reduce the distance between control unit and microphone units • Use the standard settings ment
Quinta – Trouble Shooting 7.1 19 Simultaneous Operation of the Quinta Conference System and other 2.4 GHz Devices (e.g. WLAN, Bluetooth) 7.1.1 Physical Laws Due to many physical laws it is not possible to guarantee a simultaneous interference-free operation of different devices using the same frequency band. Radio devices operating in the same frequency band will always disturb each other (the function can be disturbed as well).
Quinta – Trouble Shooting 20 You can easily recognise that the individual WLAN channels overlap considerably due to their bandwidth. All neighbouring channels (e.g. channel 1 & 2 or channel 7 & 8) cannot be used simultaneously, because they would disturb each other. Furthermore, channel 12 and 13 are not approved for the use in the USA. In general, these channels are not used either. Within the remaining frequency bands only the WLAN channels 1, 6 and 11 can be used simultaneously.
Quinta – Components 8. 21 Components Quinta CU Control unit, DSSS transmission in 2.4 / 5.2 / 5.8 GHz ISM bands, 4 receive channels, 19" housing, 1 U, incl. 2 angled rod antennae, matt black, with high-resolution OLED display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Order # 723.924 Quinta MU23 Chairman microphone unit, removable Classis GM 31xQ gooseneck microphone (optional), DSSS transmission (Triple-RF-ISM-Band), incl.
Quinta – Technical Specifications 10. 22 Technical Specifications General Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2400 – 2483.5 MHz 5150 – 5250 MHz 5725 – 5875 MHz Modulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct Sequence Spread Spectrum DSSS (2.4 GHz; 5.8 GHz); Orthogonal Frequency Division Multiplexing OFDM (5.2 GHz) digital signal processing acc. to own standard Max. number of audio streams . . . . . . . . . .
Quinta – Technical Specifications AVB interface: MAC address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00:22:BB:00:FF:FF Stream Suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00:00 Stream ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 00:22:BB:00:FF:FF:00:00 Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Audio format . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quinta – EC Declaration of Conformity 24 EC-DECLARATION OF CONFORMITY Application of Council directive: 1999/5/EC R&TTE Directive 93/68/EEC Electromagnetic Compatibility 2006/95/EC Low Voltage Directive Standards to which Conformity is Declared: EMC Radio Spectrum Safety EN 301 489-1 EN 301 489-17 EN 300 328 EN 301 893 EN 300 440-1 EN 300 440-2 EN 60 950-1 V1.8.1 V2.1.1 V1.8.0 V1.5.1 V1.6.1 V1.4.1 Manufacturer’s Name: beyerdynamic GmbH & Co.
Quinta – EC Declaration of Conformity 25 EC-DECLARATION OF CONFORMITY Application of Council directive: 1999/5/EC R&TTE Directive 93/68/EEC Electromagnetic Compatibility 2006/95/EC Low Voltage Directive Standards to which Conformity is Declared: EMC Radio Spectrum Safety EN 301 489-1 EN 301 489-17 EN 300 328 EN 301 893 EN 300 440-1 EN 300 440-2 EN 60 950-1 V1.8.1 V2.1.1 V1.8.0 V1.5.1 V1.6.1 V1.4.1 Manufacturer’s Name: beyerdynamic GmbH & Co.
Quinta – FCC Regulation 26 FCC Regulation FCC ID: OSDQUINTACU for Quinta CU FCC ID: OSDQUINTAMU2X for Quinta MU21 FCC ID: OSDQUINTAMU2X for Quinta MU22 FCC ID: OSDQUINTAMU2X for Quinta MU23 Canada: IC: 3628A-QUINTACU for Quinta CU Canada: IC: 3628A-QUINTAMU2X for Quinta MU21 Canada: IC: 3628A-QUINTAMU2X for Quinta MU22 Canada: IC: 3628A-QUINTAMU2X for Quinta MU23 Part 15.19 Statement NOTICE: This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry Canada].
For further distributors worldwide, please go to www.beyerdynamic.com E1/BA Quinta System (08.12) • Subject to change without notice beyerdynamic GmbH & Co. KG Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 7131 / 617 - 0 | Fax +49 (0) 7131 / 617 - 204 info@beyerdynamic.de | www.beyerdynamic.