BEDIENUNGSANLEITUNG OPERATING INSTRUCTIONS NOTICE D’UTILISATION DT 150 Studiokopfhörer Professional Headphone Casque de Studio DT 190 Hör-Sprechgarnitur Headset Micro-casque interstage Phistersvej 31, 2900 Hellerup, Danmark Telefon 3946 0000, fax 3946 0040 www.interstage.
INHALT / CONTENTS / SOMMAIRE BEDIENUNGSANLEITUNG DT 150 - DT 190 Charakteristik . . . Anschluss . . . . . . . Anwendung. . . . . Pflege . . . . . . . . . Ausführungen . . . Ersatzteile . . . . . . Zubehör . . . . . . . . Technische Daten. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BEDIENUNGSANLEITUNG DT 150 - DT 190 Sie haben sich für den dynamischen Studiokopfhörer DT 150 bzw. für die dynamische Hör-Sprechgarnitur DT 190 von beyerdynamic entschieden. Wir danken für Ihr Vertrauen. Äußerste Präzision bei der Fertigung und eine strenge Qualitätskontrolle garantieren die Zuverlässigkeit und den hohen Komfort, die Sie von beyerdynamic-Produkten erwarten dürfen. Charakteristik DT 150 Der geschlossene Studiohörer DT 150 bietet eine gute Isolation von Außengeräuschen.
mit freien Enden können die Stecker direkt an das Kabel gelötet werden (Anschlußbelegung siehe „Schaltbilder“, Seite 8-9). Anwendung Schließen Sie den Studiohörer DT 150 bzw. die HörSprechgarnitur DT 190 an hochwertige Geräte mit der entsprechenden Impedanz und Belastbarkeit an. Genaue Informationen finden Sie in den „Technischen Daten“. Der verstellbare Kopfbügel kann jeder Kopfgröße angepaßt werden. Bei der Hör-Sprechgarnitur ist das Mikrofon ab Werk links montiert.
Wird der Kopfhörer im Stereobetrieb benutzt, sollten im Stecker die Anschlußdrähte für links und rechts getauscht werden, d.h. braun/orange (links) gegen rot/blau (rechts). Außerdem können die Deckel für L + R Kennzeichnung getauscht werden. Das Mikrofon sollten Sie im Abstand von 2 3 cm neben dem Mundwinkel plazieren. So werden Poppgeräusche minimiert. Pflege Aus hygenischen Gründen sollten Sie den Kopfhörer von Zeit zu Zeit mit einem weichen, feuchten Tuch reinigen.
Ausführungen DT 150 DT 190 Studio-Kopfhörer, 250 Ω, schwarz, mit Kabel K 100.07 (Stereoklinke 6,35 mm), Länge 3 m, steckbar . . . . . . . . . Best.-Nr. 455.970 Hör-Sprechgarnitur, 200/250 Ω, schwarz, mit Kabel K 190.00 (freie Enden), Länge 1,5 m . . . . . . . . . . . . . . . Best.-Nr. 455.830 Ersatzteile für DT 150 - DT 190 Kopfpolster . . . . . . . . . . . . . . . . . . . . . . . . . Best.-Nr. 377.163 Ohrmuschelsatz . . . . . . . . . . . . . . . . . . . . . . Best.-Nr. 431.
K 190.40 - 1,5 M Anschlußkabel, 1,5 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . . K 190.40 - 3,0 M Anschlußkabel, 3 m, mit 3-pol. XLR-Stecker und 6,35 mm-Stereo-Klinke . . . . . . . K 190.41 - 1,5 M Anschlußkabel, 1,5 m, mit 5-pol. XLR-Stecker . . . . . . . K 190.44 - 3,0 M Anschlußkabel mit 2 x StereoKlinkenstecker 3,5 mm für Anschluß an PC-Soundkarte . . . WK 190.00 Wendel-Anschlußkabel, 3 m, mit freien Enden . . . . . . . . . . . Best.-Nr. 445.894 Best.-Nr. 446.750 Best.-Nr. 445.
DT 190 Mikrofon Wandlerprinzip . . . . . . . . . . . Übertragungsbereich . . . . . . . Richtcharakteristik . . . . . . . . . Störschallauslöschung . . . . . . Ausgangsspannung bei Besprechung aus 5 cm Entfernung . . . . . . . . . . Nennimpedanz. . . . . . . . . . . . Gewicht . . . . . . . . . . . . . . . . . dynamisch 40 - 12.000 Hz Hyperniere 30 dB 3 mV ca.
OPERATING INSTRUCTIONS DT 150 - DT 190 Thank you for selecting the DT 150 professional studio headphone or the DT 190 professional headset. They have been made in Germany from high-grade materials and assembled under stringent quality and performance tests to provide you with a professional communications tool. Please take some time to read through this instruction sheet to give you an idea of the design criterion and some information on connection, use and maintenance.
making solder joints to connectors. Where possible it is recommended to fit crimped brass sleeves to the conductors and then solder the sleeve to the connector. If direct solder connections have to be made, use a high-temperature solderpot to tin the tinsel conductors before making the solder joint to the connector, but be careful that the nylon thread does not melt. Direct solder connections can be made to all other cables with free ends (for cable connection refer to “Wiring Diagram” pages 14-15).
The microphone should be positioned to the side of the mouth, about 20 - 30 mm forward. This will keep it within the direct sound path but out of the breath stream, therefore minimising any ‘pop’ sounds. Of course every user will be different and a degree of experimentation will be necessary to achieve the preferred result. Professional users should note that it is recommended practise that headsets are issued on an individual user basis to preclude any possible health risks.
Models DT 150 DT 190 Studio headphone, 250 Ω, black, with K 100.07 cable (stereo jack 6.35 mm), 3 m long, plug-in type . . . . . . . Order # 455.970 Headset, 200/250 Ω, black, with bare-ended K 190.00 cable, 1.5 m long . . . . . . . . . . . . . . . . Order # 455.830 Spares for DT 150 - DT 190 Hearband cushion . . . . . . . . . . . . . . . . . . . . Order # 377.163 Ear cushions pair . . . . . . . . . . . . . . . . . . . . . Order # 431.532 Supplied Accessories Pop-shield (for DT 190) . . . . . . . . . .
K 190.40 - 1,5 M Connecting cable, 1.5 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . . Order K 190.40 - 3,0 M Connecting cable, 3 m, with 3-pin. XLR plug and 1/4" jack plug . . . . . . . . . . . . . . Order K 190.41 - 1,5 M Connecting cable, 1.5 m, with 5-pin. XLR plug. . . . . . . . . Order K 190.44 - 3,0 M Connecting cable with 2 x Stereojack plug 3.5 mm for connection with a PC- sound card . . . . . . . Order WK 190.00 Coiled connecting cable, 3 m, free ends. . . . . . . . . . . .
DT 190 Microphone Transducer type . . . . . . . . . . . dynamic Frequency response . . . . . . . . 40 - 12.000 Hz Polar pattern . . . . . . . . . . . . . hypercardioid Interference discharging . . . . 30 dB Output voltage at a distance of 5 cm . . . . . . . . . . . 3 mV Nominal output impedance . . approx. 200 Ω Weight . . . . . . . . . . . . . . . . . .
NOTICE D’UTILISATION DT 150 - DT 190 Nous vous félicitons pour l’achat de ce casque / microcasque professionnel. Pour exploiter au mieux ses possibilités, nous vous conseillons de lire attentivement cette note explicative. Description DT 150 Casque de studio professionnel de type fermé, assurant une parfaite isolation contre les bruits ambiants. Il est livré sans câble. (La liste des câbles disponibles figure ci-après dans la rubrique accessoires).
Le microphone des micro-casques est d’origine monté côté gauche. En cas de nécessité vous pouvez modifier ce montage pour avoir le micro côté droit. DT 190 1. Soulevez le couvercle avec un petit tournevis. 2. Enlevez la vis 3. Retournez le disque 180°. La marque du disque est orienté vers le haut du bras de support. 4. Resserrez la vis et encliquetez le couvercle sur l’articulation.
Les mousses de protection «POP» des micros se lavent simplement à l’eau tiède. Évitez de les replacer sur le microphone avant qu’elles ne soient totalement sèches. Les oreillettes, le bandeau de l’arceau serre-tête et les mousses «POP» étant soumis à une usure naturelle provoquée par la transpiration, la séborrhée et la salive, il est indispensable de les changer régulièrement. La construction modulaire de cette série de casques et microcasques permet un service après-vente simple et rapide.
Accessoires fournis Mousse protection «POP» (pour DT 190). . . Art. N° 108.677 Accessoires en option pour DT 150 K 100.00 - 3,0 M Câble droit, 3 m, extrémités libres . . . . . . . . . . . . Art. K 100.07 - 3,0 M Similaire au K 100.00 mais avec fiche Jack Stéréo 6,35 mm . . . . Art. WK 100.00 Câble torsadé, 3 m, extrémités libres . . . . . . . . . . . . Art. WK 100.07 Similaire au WK 100.00 mais avec fiche Jack Stéréo 6,35 mm . . . . Art. N° 101.710 N° 101.753 N° 101.788 N° 101.826 pour DT 190 K 190.
K 190.44 - 3,0 M Câble droit avec 2 fiches Jack stéréo 6,35 mm pour la connexion à une carte audio d’ordinateur . . . . . . . . . . . . . . . Art. N° 446.947 WK 190.00 Câble torsadé, 3 m, extrémités libres . . . . . . . . . . . . Art. N° 448.176 Spécifications techniques DT 150 - DT 190 Écouteurs Bande passante . . . . . . . . . . . 5 à 30.000 Hz Impédance nominale . . . . . . . 250 Ω Pression sonore nominale à 1 kHz . . . . . . . . . . . . . . . . . .
DT 190 Microphone Type de transducteur . . . . . . . Bande passante . . . . . . . . . . . Directivité. . . . . . . . . . . . . . . . Supression de bruit . . . . . . . . Voltage de sortie à 5 cm . . . . Impédance de sortie nominale . . . . . . . . . . . . . . . . Poids. . . . . . . . . . . . . . . . . . . . dynamique 40 - 12.000 Hz hypercardioïde 30 dB 3 mV env.
Garantie Warranty Garantie In den Ländern der EU (EWR) bietet beyerdynamic neben den gesetzlichen Gewährleistungsansprüchen gegen den Verkäufer Garantie für die in der EU gekauften Geräte. Die Garantieleistung beinhaltet Material und Arbeit während der Garantiezeit, welche in den einzelnen Ländern der EU vom beyerdynamic-Vertriebspartner festgesetzt ist. In allen Ländern gelten neben den gesetzlichen Bestimmungen die von der beyerdynamic-Verkaufsstelle gewährten Garantieleistungen.