User Manual

APPLICATION
Like its predecessor the T 1 of the 2. generation has a semi-open
design, which features a spacious sound and detailed hi-fidelity.
Furthermore, the 2
nd
generation of the T 1 has many optimised
details. A highlight is the audiophile textile-coated, detachable
connecting cable, which is shielded over its whole length and
provides the best emission and radiation protection. Inside the
cable conductors are made of OCC 7N copper to ensure an
excellent music transmission. In order to connect the cable to the
headphone, there are 2 x gold-plated mini jack connectors
(3.5 mm) with a locking mechanism. In order to connect the
cable to hi-fi systems, the other end of the cable is provided with
a gold-plated mini jack connector (3.5 mm) and gold-plated
screw-on 1/4" adapter. As an option the connecting cables are
also available with a jack connector and a length of 1.40 m as
well as a 4-pin XLR connector for a balanced connection to
appropriate headphone amplifiers.
The high quality of the headphone is completed by viscoelastic
breathable ear pads that enable a very pleasant comfort over
several hours.
The T 1 is supplied with a special high-quality hard case for storage
or transport.
FEATURES
• Semi-open design (attenuates ambient noises without
completely muffling them)
• Outstandingly neutral
• Tesla technology with highest efficiency
• Double-sided, detachable cable
• Audiophile, textile-coated connecting cable
• Conductor inside the cable made of OCC 7N copper
• Made in Germany
• 5-year warranty
TECHNICAL SPECIFICATIONS
Transducer type . . . . . . . . . . . . . . . . dynamic
Operating principle . . . . . . . . . . . . . semi-open
Frequency response . . . . . . . . . . . . . 5 - 50,000 Hz
Impedance . . . . . . . . . . . . . . . . . . . . 600 Ω
Nominal SPL . . . . . . . . . . . . . . . . . . 102 dB (1 mW / 500 Hz)
T.H.D . . . . . . . . . . . . . . . . . . . . . . . . < 0.05% (1 mW / 500 Hz)
Power handling capacity . . . . . . . . . 300 mW
Max. SPL . . . . . . . . . . . . . . . . . . . . . 126 dB (300 mW / 500 Hz)
Sound coupling to the ear . . . . . . . . circumaural
Headband pressure . . . . . . . . . . . . . approx. 2.8 N
Cable . . . . . . . . . . . . . . . . . . . . . . . . 3 m / double-sided
Connector . . . . . . . . . . . . . . . . . . . . gold-plated 3-pole mini
stereo jack (3.5 mm) &
1/4" adapter (6.35 mm)
Weight without cable. . . . . . . . . . . . 360 g
Supplied accessory . . . . . . . . . . . . . . hard case
Recommended accessories . . . . . . . . audiophile connecting cable
with 4-pin XLR connector
for balanced transmission,
length 3 m
(Order # 718.912)
audiophile connecting cable
with 3-pole mini stereo jack
(3.5 mm) & 1/4" adapter
(6.35 mm), length 1.40 m
(Oder # 718.637)
ACCESSORIES –SPARE PARTS
For more accessories and spare parts, please visit:
www.beyerdynamic.com
T 1
(2
nd
Generation)
Dynamic Headphone
Order # 718.998
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. [phone] / 617 - 0 | Fax [phone] / 617 - 204
[e-mail] | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2 / T 1 (2. Generation) (02.16)
1 of 1
Optionally available:
Connecting cable with 4-pin XLR
connector, 3 m long
Supplied with 3-pole mini stereo jack
(
3.5 mm) & 1/4" adapter (6.35 mm),
3 m long
O
ptional available:
Connecting cable with a length of 1.40 m
S
upplied with hard case