USER’S MANUAL Model: BM334BT
CAUTION: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. PRECAUTIONS BEFORE USE KEEP THESE INSTRUCTIONS IN MIND: 1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device. 2. Install in accordance with the supplied user manual. 3.
11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. 12. Keep away from rodents. Rodents enjoy biting on power cords. 13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent. 14.
26. Prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss. 27. If the product is delivered with power cable or AC power adaptor : If any trouble occur, disconnect the AC power card and refer servicing to qualified personnel. To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus. Don’t step on or pinch the power adaptor.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 29. Caution about the use of Batteries: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
1. Get to know the controls on Player Item 1 2 3 4 5 6 7 8 9 10 11 12 Description TFT LCD Display M Button (Menu) Button (On/Off, Play/Pause) Button (Previous/Fast-Rewind) Button (Next/Fast-Forward) Button (Previous Menu/Exit) Microphone Position (mono, inside USB port) Micro USB Port (PC Connection/Charge) Micro SD Memory Card Slot Earphone Output Jack (3.
2. About Player Battery Player has an internal, non–user-replaceable battery. For best results, the first time you use player, let it charge for about 2 ~ 3 hours or until the battery status icon in the “Connect” screen shows that the battery is in full. Battery is full Note: Player may continue use battery power after it’s been turned off. For maintain the battery life and performance, if unit isn’t used for a while, the battery need to be recharged, recharging the battery at least once per month.
Choose “Charge & Transfer” to upload or download the media files with your computer and charging the Player’s battery. Choose “Charge & Play” to operates the Player’s function and the battery charging in background. The level bars are running in battery icon at the connecting screen. The battery is in charging. “Choose connect type” “Charge & Transfer” “Charge & Play” In Charging Important: The battery does not charge when your computer is in sleep.
screen will switch to “Main Menu” screen. And now is safe to disconnect the player with your computer. Unplug the USB cable from the player. Or, If you’re using a Windows PC, you can also eject player in My Computer or by clicking the “Safely Remove Hardware” icon in the Windows system tray, select the correspondence name of USB Device and choose “Stop” > choose “Confirm” > choose “Confirm” follow by the pop-up windows you’re your computer.
Record FM Radio Photo Setup eBook 5. Use Setup Menu You might need to set date & time or change some default setting as you desired in setup menu before you start to use the player. To go into setup menu, from main menu, choose “Setup” by using the / and buttons, a “Setup” menu appears to use; For back to previous menu or main menu, press or pressing the button during in setup menu and submenu. Setup Menu a.
In Setup menu, choose “Set sleep timer” to switch On the sleep timer, a levels bar with number appear to use, then choose “1 ~ 99” (Minutes) as you want by using the / and buttons. The Player will turn off itself automatically as your desired time set. b. Display settings: You can set the backlight to illuminate the screen for a certain amount of time as you desired, or make the backlight to “always On” when every time you turn ON the player.
Choose “ Set date”, a date interface will appear to set; The “YY/MM/DD” set item is highlighted, press M button to switch in between day, month and year which you want to set. And adjusting them to current date by pressing the / button. Finally, you need to press the button to confirm the adjustment and the screen will back to previous menu. d. Language: This player can use difference OSD languages.
using the / and buttons, the device will start searching for approximately 10 ~ 20 seconds. Devices found will be listed on the screen. Choose your device from the on screen list and choose “Pair / connect” by using the / and button. The screen is switched back to BT now playing screen and a Bluetooth icon “ “ will show on the display indicating the Bluetooth connection is ok. If the connection is lost the color of the Bluetooth symbol will change to red.
play. Choose “Artists” to enter folder(s) list menu grouping by Artist name, then choose who name of Artist folder > choose a song file in list where start the play. Choose “Albums” to enter folder(s) list menu grouping by Album name, then choose who name of Album folder > choose a song file in list where start the play. Choose “Genres” to enter folder(s) list menu grouping by Genres name, then choose who name of Genres folder > choose a song file in list where start the play.
“Music Menu” a. Play Music In “Folders & songs/Artists/Albums/Genres” list menu, choose a song file to star the play using by using the / and buttons. Then the music “Now playing” interface will appears to view and use; Now Playing b. Play/Pause In music now playing interface; Press the button to pause the playing music. Press it again to resume. c. Next/Fast-forward and Previous/Fast-backward Press the button to play next music. Press the button to play previous music.
to the default setting level which may exceed 85dB. Press the M button to accept the warning and enter into the volume control for increase the level and until to maximum level. Use Lyric Display This player supports “*.LRC” lyric files and lyrics can synchronous displayed while playing music if you music file has lyric file included together. Make sure the music file name and the “*.LRC” file name must be same and upload into player together. The embedded lyric song file will not display lyric.
Note : The equalizer function don’t work when using a Bluetooth earphone/headphone. Only when using a cabled device the equalizer function will work. c. Add to playlist When playing a song you would like to add to a playlist, press the “M” button and use the / keys to go to the “add to playlist” option and select with Then you can select the playlist you want to add this song to; Repeat the above steps to add more songs to your playlist(s) To use the playlist you made.
a. Play Video From Main Menu, choose “Movie” by using the / and buttons, a files list appears to choose; Choose the desired file to start the play and the screen switch to movie now playing screen. The movie is playing automatically. b. Play/Pause Video In movie now playing screen, press the button to pause. Press it again to resume. Press button to go back files list screen for choose another movie file to play if you want it. c. Play Previous or Next file Press the button to play next file.
b. Delete Movie: Choose “Delete Movie” by using the / and buttons; A “video name…” delete? dialog is appear to confirm, choose “Yes” to confirm delete the current song file in memory; A “deleting” dialog is appears for few seconds and the current song file is deleted. And the next movie’s file is selected to play automatically. Choose “No” to abort. c.
shown below: Then click to choose the folder where to save the convert files, and then click to select the folder where the original files are. The original file will show in the file window once selected. Move the mouse arrow and left click mouse on the unconverted source files to select with highlight in the file window, then the icon will be highlighted into icon. Now click this icon and a dialog box will be shown.
Now click this Make sure Video type is “AMV/AVI” and screen width and height is “160x120/320x240” selected. Video convert and Image quality should be “Normal” and “High” as defaulted. Click “OK” to confirm the setting. Now click to start converting. icon and a dialog box will be shown. After conversion, the converted files will play automatically for preview if AMV format has selected.
recorded file(s) and playback them in same menu. To do this: From main menu, choose “Record” by using / and buttons, a list menu appear to choose; a. Start Voice Recording: From list menu, choose “Start Voice Recording”, a “Now Recording” screen appear to view and it is in recording. Now Recording Screen To Start/Pause Recording In recording mode, press the button to pause the recording. Press the button again to resume recording.
In library now playing interface; Press the button to pause the playing file. Press it again to play. Next/Fast-forward and Previous/Fast-backward Song file Press the button to play next file. Press the button to play previous file. Press and hold the button to use fast-forward Press and hold the button to use fast-backward. Adjust volume level Press or pressing the / button to adjust volume levels to up/down and a volume control screen is appear for viewing.
Press button to choose one of them and then press button to entering “Radio Tune” Screen a. Start FM radio recording ▪ In FM Radio menu, choose “Start FM radio recording” to enter the FM record function under in the radio mode, the screen will switch to Now Recording screen. ▪ Press button to start the FM recording. Press button again to pause the FM recording if you want.
▪ Choose “FM REC libray” in FM Radio menu for playback the FM recording files. Delete ▪ For delete the REC file, using and “M” button to choose the desired delete REC file, press to select “Yes” to delete or “No” for abort or ▪ Choose “Delete All” in “FM REC libray”, press to go to delete menu, using and button to choose “Yes” to delete or “No” for abort 14. Use EBook Menu You can use the player as a text reader with supported file format (.TXT).
use, then choose “02 ~ 30” (seconds) as you want by using the / and buttons. The EBook reading page will auto flip according the selected time gap here when you activated the auto page flip function. b. Delete eBook: Choose “Delete”, a “file name.*” delete? dialog is appear to confirm, choose “Yes” to confirm delete the selected file or current reading file in memory; A “deleting” dialog is appears for few seconds and the current playing file is deleted.
= page 680, please refer to the appeared list in Page Select function. 16. Use Photos Menu You can use the player as picture/photo viewer, to browse file: From main menu choose “Pictures” by using the / and buttons, a list menu appear to use; a. Play Pictures file In list menu, choose a file to start the play. Press the button to go back to list menu for other file selection. b. Change previous/next file Press the button to next file. Press the button to previous file. c.
playing file is deleted. If in file playing, the next file is selected to play automatically. Choose “No” to abort. c. Update Playlist: Choose “Update Playlist” to update the playlist when you found it show incorrect; actually, it is normal due to some media files could be manual deleted in player’s memory by user in some case. However, update the playlist when necessary. 18. Use Memory Card Slot This player allows you to play those support media files from your Micro SD memory card (T-Flash).
Characters in LCD are corrupted Download of media files fails. 21. Specification Dimension Weight LCD Earphone Impedance Internal Memory Memory Card Slot Battery Power Source Bluetooth dirty. Corrupted MP3 may make a static noise and the sound may cut off. Make sure that the music files are not corrupted. Check whether the right language has been selected. Check whether USB cable is damaged and is connected properly. Check whether driver is installed correctly.
Audio Radio Music Format Video/Movie Recorder Coding Picture Format EBook Format Operating Temperature Operating System Earphone Output Freq. Responses SNR Receiving Range MP3, WMA APE, FLAC, WAV AMV/AVI 2mW x 2 at 32 Ohm 20Hz - 20000Hz > 80dB FM: 87.5 – 108MHz 32Kbps - 320kbps 160x120/ 320x240 (max.) WAV JPEG/BMP/GIF TXT 0 to 40°C Window 2000/XP/Vista/Win7 or higher; Mac 9.2 or Higher 22. Disclaimer Updates to Firmware and/or hardware components are made regularly.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.