MU15 15" two way full range speaker with built-in crossover MU Series Pro Loudspeaker System User Manual UM- MU1 5 - 2 0 0 9 0 8 2 7 v e r A
SAFETY INSTRUCTIONS PLEASE READ THIS MANUAL FIRST Thank you for a buying for future reference. product. Read this manual first as it will help you operate the system properly. Please keep this manual WARNING: This product must be installed by professionals. When using hanging brackets or rigging other than those supplied with the product, please ensure they comply with the local safety codes.
MU15 CONTENT MU Series Pro Loudspeaker System CONTENT INTRODUCTION Features 3 Description 3 Applications 3 CONNECTION 4 Terminal Plate 4 NL4 Connection 4 System Connection Reference 4 Loudspeaker Connection 5 INSTALLATION 6 Mounting Accessories 6 Installation Reference 6 TECHNICAL SPECIFICATION 7 Technical Sheet 7 Frequency Response And Impedance Curve 7 2D Dimension 8 Product information subjects to be updated without notification, please visit www.elderaudio.
MU15 INTODUCTION MU Series Pro Loudspeaker System MU15 15" two way full range speaker with built-in crossover Features Two way full range phase inverted speaker with 15" woofer and 3" compression driver. Dispersion 600x400, the controlled frequency reach to 1kHz. Advanced free protection design assure the reliability of tweeter. Sensitivity 98dB, Max.SPL 124dB. Rated power 360W, peak power 1440W. Standard flying mounting system. The necessary flying mounting accessories will be attached, the Max.
MU15 CONNECTION MU Series Pro Loudspeaker System Two NL4 connectors are available for amplifier connection. Paralelled connector is very convenient for another speaker connection. Terminal Plate MU15 Warranty does not cover damage caused by incorrect installation, operation or overload. 1+ 1- INPUT No.: INPUT + - 1+ 1+ 1- : INPUT 1- 2+ 1+ 2- Crossover + 1- OUTPUT FREQUENCY 45Hz-17kHz POWER(RMS) 360W SENSITIVITY(1W/1m) 98dB IMPEDANCE 8 NET WEIGHT 28kg ELDER AUDIO MANUFACTURE CO.
MU15 CONNECTION MU Series Pro Loudspeaker System Speaker Wiring 1. Banana plugs to NL4 Connect to speaker Connect to amplifier 2- 1+ 2+ 1- 2. NL4 to NL4 Connect to speaker Connect to amplifier 1+ 2- 1+ 2+ 2- 2+ 1- 1- 3. Consumption curve of connection cable(Only for reference, the result is different if adopting the different cables) 76 250 8 Ohm 150 61 46 4 Ohm 100 2 Ohm 50 0 30 Wire length Meters Wire length Feet 200 15 0 4.0 2.5 1.5 1.0 0.75 0.
MU15 INSTALLATION MU Series Pro Loudspeaker System Mounting Accessories Installation Reference The standard flying mounting hardware is very convenient for different installations and applications. 1. Vertical flying mounting installation 1. Speaker stand SPS-502BC black 2. Horizontal flying mounting installation 2. Standard flying mounting ring Warning: Make sure the mounting accessories safety factor not less than 5:1 or meet the local standard during installation .
MU15 TECHNICAL SPECIFICATION MU Series Pro Loudspeaker System Speaker Testing Method Technical Specification 1. Frequency Response System: Passive full range wooden speaker with painting Use Pink noise to test the speaker in the anechoic chamber, adjust the level to make the speaker work at its rated impedance and set the output power at 1W, then test the frequency response 1m away from the speaker.
MU15 TECHNICAL SPECIFICATION MU Series Pro Loudspeaker System 2D Dimension 485mm [19.09in] Top view 485mm [19.09in] Front view Back view 720mm [28.
Notes: