Inflatable Stand-Up Paddle Boards SUPS OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing this Outdoor Tuff product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. The manufacturer cannot be responsible for issues arising from modification.
PERSONAL SAFETY • Stand-up paddle boarding is a dangerous sport. Using this product will expose the user to unexpected risks, dangers and hazards. • ALWAYS use extreme caution when using this product. Acting in a careless manner or misusing the product may result in serious injury or death. • Consult your physician before using a Stand-Up Paddle Board (SUP). Use this product only if you are in good physical health. User must know how to swim. • DO NOT exceed the SUP weight capacity.
CARTON CONTENTS: As you open the carton, make sure the following are inside: • • • • • • Backpack Adjustable paddle Pump with pressure gauge Fin Repair kit Ankle leash INFLATION PROCEDURE: 1. Choose a smooth surface to assemble your board. 2. Remove the board from the back pack and unroll it. 3. Attach pressure gauge to hose and then attach pressure gauge to pump.
4. Attach other end of hose to the inflation/deflation valve on the rear of the board as shown below. 5. Stand the pump on hard, level ground and start to pump. The first time you inflate the SUP will require more effort than subsequent inflations. 6. Make sure you keep your hands toward the center of the pump handles when pumping and your feet firmly on the footrest of pump. 7. Pump time varies by user but normally takes 3 to 6 minutes. We recommend using the board at a pressure between 12- 15 psi.
ANKLE LEASH INSTALLATION: A leash is provided and must be used. The U.S. Coast Guard requires it. There is a ring installed at the tail end of the board. Clip the leash to the ring. PADDLE ASSEMBLY AND USE: 1. To prepare the telescopic paddle for use, loosen by turning middle grip counter clockwise. 2. Slide paddle to desired position and turn clockwise to tighten in place. DEFLATION PROCEDURE: 1.
REPAIRING SMALL PUNCTURES: A repair kit comes with your board. It contains repair fabric, adhesive and a valve wrench. To make a repair, follow these steps: 1. Cut your patch to extend 2” beyond all edges of the tear. Round the corners of the patch. Square corners are more likely to snag and lead to peeling. 2. Trace the outline of the patch on the damaged surface with a pencil. 3. Clean the surfaces. 4. Apply two even, thin coats of the adhesive provided to both surfaces.
STORAGE AND BOARD CARE: This board is manufactured with UV Resistant PVC to provide superior protection from ultraviolet light. However, to ensure extra years of flexibility and bright colors, avoid storing the board where it will be exposed to weather or in direct sunlight. Please review the following list for storage and board care tips. 1. Before storing, hose off the board and let it dry completely to prevent mildew buildup. Do not use harsh chemicals for cleaning.
WARRANTY INFORMATION: Outdoor Tuff warrants this product to be free from major defects in material or workmanship to the original purchaser for a period of one (1) year from the date of the purchase. This warranty is subject to the following limitations: 1. The warranty is valid only when this product is used for normal recreational activities and does not cover products used in rental or school operations. 2.
