Installation Instructions TrailMax™ II Fold and Tumble Rear Seat Vehicle Application • Jeep CJ5s, CJ7s and Wranglers 1955 – 1995 Vinyl Seat Part Number: 39440 • Jeep CJ5s, CJ7s and Wranglers 1955 – 1995 Cloth Seat Part Number: 39441 www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Jeep Accessories by Bestop.
TrailMax™ II Fold and Tumble Rear Seat – Installation Instructions Parts List and Hardware Identification Before beginning the seat installation, set the parking brake, place the vehicle in gear or park and chock the wheels to reduce the risk of the vehicle unexpectedly moving, which could result in serious injury. Remove the Existing Rear Seat Seat, Qty - 1 E-Clips, Qty - 2 Remove the old rear seat. Remove the existing front mounting brackets.
TrailMax™ II Fold and Tumble Rear Seat – Installation Instructions Failure to install the E-Clip may result in the seat moving off the Front Brackets which could result in serious injury to you and others. Install Seat 1986 and Newer Vehicles Orient the Seat, with the Legs on the bottom of the seat facing the rear of the vehicle. Fold the Seat back down into the closed position. Place Seat in the vehicle. Slide the Seat toward the front of the vehicle.
TrailMax™ II Fold and Tumble Rear Seat – Installation Instructions If your vehicle has carpet covering the floor, cut the carpet so that the Floor Mounting Brackets are installed flush on the metal floor. If the Floor Mounting Brackets are not flush mounted, the seatback may not lock in place, which could result in serious injury to you and others. Check for wiring and fuel lines before drilling holes in floor.
TrailMax™ II Fold and Tumble Rear Seat – Installation Instructions Failure to install the E-Clip may result in the seat moving off the Front Brackets which could result in serious injury to you and others. Install Seat 1985 and Older Vehicles Orient the Seat, with the Legs on the bottom of the seat facing the rear of the vehicle. Fold the Seat back down into the closed position. Place Seat in the vehicle. Slide the Seat toward the front of the vehicle.
TrailMax™ II Fold and Tumble Rear Seat – Installation Instructions Care and Maintenance of your Bestop Product Your Bestop product is made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning and maintenance. Washing: The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap or use Bestoprecommended Bestop Cleaner and Bestop Protectant.