Interactive Touch Panel User’s Manual
Index 1.Features ...................................................................................................................... 3 2. Safety Precautions ..................................................................................................... 3 3. I/O Ports and Buttons ................................................................................................ 8 4. Installation and Connection ..................................................................................... 11 5.
1. Features 1. Configured with Android 8.0 over the hardware of 4-core Processor, DDR4 2GB memory, and 32GB eMMC. 2. Optional detachable OPS computer, pre-loaded with Windows operating system based on user’s demand. 3. Built-in dual touch with switching, where EMR touch supports original handwriting over two EMR active pens concurrently with 1024 pressure levels and 0.037mm resolution, and P-Cap touch supports handwriting within ±2.0mm accuracy.
and applications of the device. A series of proper and strict test plan has been arranged before this product was released from manufacturer. However, any incorrect installation has the potential to trigger electrical shock and hazardous flame. To ensure safety, extend life span, and maximize the performance, please read through this user’s manual with reference to the corresponded marking on the product itself.
Warning Please use nothing but 100-240V, 50/60Hz power source wall socket to ensure perfect contact Please ensure power is off between the power cord and wall socket. whenever a cable is plugged in or Please remove any dust or metallic unplugged (any cable). substance on power cord and wall socket Please ensure Bestboard is before connecting.
or unplugged (any cable). substance on power cord and wall socket Please ensure Bestboard is before connecting. secured on a stable surface to Please do not disqualify the power cord by: avoid damage by falling or flame 5. modifying power cord Never place Bestboard at places 6. placing power cord underneath heavy load that: 5. 7. Expose Bestboard directly any heat source to sunlight, moisture, heat, 8. coldness, or dust. 6. 7.
Keep the small accessories away from corners and the bottom side. Do not press accidental ingestion. directly on the screen surface. In case Bestboard is not to be used for a Always use Bestboard in proper lighting. longer time, please remove the power Insufficient lighting or watching Bestboard cord from wall socket. for a long period of time could hard your If Bestboard is to be relocated or re- eyes.
Ventilation Wall-mount No air flow Wall 3. I/O Ports and Buttons Android I/O ports on the right: 8 • Please reserve as the minimum gap as indicated in the drawing. • Do not cover the ventilation opening or insert any object into through the housing. • Avoid placing the unit in a closed space, such as book shelf or closet. The unit should be installed with enough space surrounding it unless sufficient ventilation is provided.
② ③ ④ ⑤ ① ⑥ ⑦ ⑧ ⑨ ⑩ Number Name Description ① POWER DC Power Switch ② LAN RJ-45 LAN ③ DP DisplayPort (output) ④ HDMI 1 HDMI input ports ⑤ HDMI 2 Maximum resolution: 3840*2160 (4K) 60HZ; ⑥ HMDI 3 ⑦ VGA IN VGA input port ⑧ PC AUDIO Audio input port, 3.5mm ⑨ USB3.
① Number ③ ④ ⑤ ⑥ ② ⑦ Name ⑧ ⑨ Description ① SPDIF Digital Audio Interconnect ② PHONE 3.
WIFI LAN HDMI DP MIC AUDIO POWER WIFI 4. Installation and Connection Diagram to connect an external PC; Bestboard I/O Ports 1. Connect VGA-in to VGA on PC 2.
Bestboard I/O Ports 1. Connect any HDMI to HDMI on PC 2. Connect Touch to USB on PC PC screen is displayed with touch function PC I/O Ports Remark: This diagram shows only connections with PC. It may not cover all scenarios as could occur at any field site. 5. Remote Control Remote Control device can be designated by customers.
6. Basic Navigation 6.1 Turn On / Standby Add power cord and enable AC power switch. This will light up the red LED in the remote control access window at the front. Press on the remote control or the power button on the right side “ ”. This will turn on the unit, turn the red LED to green, and wake up OPS controller. At power on mode, press the “ ” button on remote control or that on the right side to push the unit to standby mode and power off OPS controller 6.
, Icon Description Icon Description Local conference Access document. Handwriting Open up local storage and external USB Multi-location conference Multiple screen sharing Switching to Windows Click to access more applications Wake/Hide Quick Menu Wired/Wireless network status 6.3 Handwriting Dual touch functions (P-Cap + EMR) are supported at this mode. P-Cap touch can be triggered by fingers and support single point touch.
Handwriting Features: ① Save content,Change background, Send content by email, Scan to go (Scan and email is only supported when internet is connected); ② Erase: Slide to erase, hand gesture to erase, or touch to erase; ③ Change to 15 writing colors at any time; ④ Support writing over what has been written; 15
6.4 Access Document Click on Document to open or preview the content of local and external USB drive, as well as switching to other frequently used signal channel.
6.5 Video Conference Click on Conference to bring up conference system.
Once in the conference, users are able to see video shot from multiparty for further easy discussion and communication. Details of all conference buttons: Disable audio; Manage participants and configure permissions Enable audio; Click the arrow on the right to control your device Invite other participants; Disable video Share screen, report, and document Enable video; Click the arrow on the right to control your device Initiate chat with mojo Exit meeting Record meeting 6.
③ Click network and device ④ Click mobile hot-spot Please configure these SSID Password Select Band: 5G preferred; Select default AP Channel; Click “Save” after setup Please follow these step to start screen sharing; 1. Please ensure Android apk has been installed. The QR-code will take you to find this apk; 2. Connect to the mobile hot-spot; 3. Start Eshare, and click on WiFi sharing to cast the screen of your device to the large screen. 4. IOS device does not need any apk.
Install Eshare; Connect to mobile hot-spot Using Wireless Screen Sharer: 1. Turn on mobile hot-spot; 2. If the Share has never been used before, please plug this Sharer into the USB port of our hub product for pairing. Successful pairing will prompt a message on the screen; 3. Plug this Wireless Screen Sharer into PC USB port, after driver is automatically loaded, Sharer starts to blink and at last stops blinking with prompt message on the screen, it is time to share PC content to large screen; 4.
Bestboard supports concurrent screen sharing from 9 sources. 6.
6.
Quick Guide 6.
6.10 Document Preview Click on to bring up the following interface; How to copy a picture to external USB drive; ①, Select a picture to be copied, which will prompt a blue tick.
This will bring up the following interface. Please click on download external USB drive. Click on this USB drive to select it, copying or moving. 7.
Size 65” 75” 86” Android Android 8.0 CPU 2×ARM Cortex-A73+2×ARM Cortex-A53 1.5GHZ GPU Mali-G51 GPU DDR 4G EMMC 32G Resolution 3840*2160 Pixel Pitch 0.429mmX0.372mm 0.429mmX0.429mm Response Time 0.4935mmX0.4935mm ≤8ms Brightness ≥400 cd/m2 ≥400 cd/m2 ≥350 cd/m2 Contrast Ratio ,1200:1 ,1100:1 ,1200:1 Viewing Angle 178° Color Depth 1.07B Supported point: 10 (Max. up to 40, some app supports only single point) P-Cap Touch Wakeup response time: 30ms; Accuracy: ±2.
Max. Power 210W 350W 400W 1511.5*60*866.5mm 1733.24*60*1011.26mm 1978*60*1149mm 1720*250*1080mm 1942*250*1200mm 2186*250*1340mm Weight(KG) 45/68KG 65/108.8KG 80/118KG VESA 4*M8/400mm*300mm 4*M8/600mm*300mm 4*M8/600mm*300mm Product Dimension (mm) Packing Dimension (mm) Net/Gross Mounting Wall Mounting, Mobile Stand Mounting Material Aluminum/Sheet Metal Environment Safety OPS Configuration All components compliant to international environment safety standard Options.
VGA port does not carry audio signal. If VGA port is the display signal on the external laptop, please ensure to add audio cable between laptop and BESTBOARD. In case of HDMI, no such audio cable is needed as audio signal has been covered by HDMI pin-out. 3. Touch function does not work when a laptop is connected externally.
9. Trouble Shooting Boot up issues Automatic shutdown 1. Ensure schedule shutdown or standby is turned off; 2. Check input source. Bestboard will be brought to save mode for standby if no input signal is present; 3. Check if AC power is stable; No indication 1. Check power; 2. Check if the rock switch is at “on” position; Remote Control Access Window shows red indication, but nothing occurs on the press of remote control or power button. 1.
1. Check if EMR active pen or finger is touching the screen vertically; 2. Check if any other object is touching the screen, for example, a metallic object; 3. In the case of external PC being connected, check if the touch USB cable is correctly connected. 10. Maintenance Some correct maintenance could help to prevent the occurrence of most little issues. Periodic cleaning could help to hold the unit nice and tidy as well as excellent operation.
2. All contents delivered within this user’s manual is only for the purpose of reference. No form of promise is issued. 3. The product outlooking design, function, and hardware improvement is reserved by Sinocan International and is subject to change without further notice.
20C