INSTRUCTION MANUAL Mobile Pocket Herb Garden Bed Ver.
NOTICE Please retain these instructions for future reference. • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws, and knobs before use. • Reconfirm that all bolts, screws, and knobs are secure every 90 days. • Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled. • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
PARTS A LEG I B 2 PCS E LONG PANEL II VERTICAL PANELS F PLANT MARKERS 8 PCS SUPPORT BAR J HORIZONTAL PANELS 4 PCS N SHORT PANEL D 2 PCS G 1 PC 3 PCS M C 2 PCS 1 PC I LEG II BOTTOM PANEL I 1 PC H 2 PCS K BOTTOM SHELF 1 PC LONG PANEL I BOTTOM PANEL II 2 PCS L CROSS BAR 4 PCS LINERS 8 PCS |3
PRODUCT ASSEMBLY 1 Attach one part E long panel to one part A leg and one part B leg with four part 1 screws, two screws per leg. A Connect one part C short panel to each end of the part E long panel with four part 1 screws, two screws per leg. Attach one part A leg to one part C short panel with two part 1 screws. B C x10 1 A C E Before securing the legs, make sure the caster hole is facing upward. 2 x2 1 F Attach one part F support bar to the two part C short panels with two part 1 screws.
PRODUCT ASSEMBLY 3 Attach the remaining part B leg to one part C short panel with two part 1 screws. B 4 x6 Attach one part D long panel to the two part C short panels with four part 1 screws, two screws per leg. D Attach two part 4 casters into the legs on one long panel, and two part 5 locking casters on the other long panel. Attach four part L cross bars to each leg and part E long panel with eight part 1 screws, two screws per bar.
PRODUCT ASSEMBLY 5 Insert two part G panels and two part H panels into the bed assembly. G NOTE: Arrange the panels as follows: G, H, H, G G H H G H There will be a slight gap between the two H panels, this is normal and will reduce warping from moisture. 6 Attach the part K bottom shelf with four part 1 screws.
PRODUCT ASSEMBLY 7 x3 Insert four part J horizontal panels and three part I vertical panels. Attach one part 3 bracket to a part H panel with three part B screws, repeat on the opposite side to secure. I x4 J x6 2 x2 3 8 Insert the part N liners, one liner per pocket.
HELP CENTER Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com CHAT US! Chat Support Product Inquiry Orders FAQ Product Assembly Returns & Refunds PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included.