INSTRUCTION MANUAL 2-Person Outdoor Swing with Canopy Ver.
NOTICE Please retain these instructions for future reference. • Please do not exceed the weight limitations of this item. • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws and knobs before use. • Reconfirm that all bolts, screws, and knobs are secure every 90 days. • Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is completely assembled. • Be aware that some parts are heavy and have sharp edges.
PARTS A FRONT LEG B 2 PCS E LEG SUPPORT ARMREST EI CANOPY 1 PC SWING ARM J SEAT 1 PC N RIGHT TOP BAR D F LEFT BACK SUPPORT G 1 PC K CANOPY FRAME 2 PCS LEFT TOP BAR 1 PC 1 PC 4 PCS 2 PCS M C 2 PCS 2 PCS I BACK LEG RIGHT BACK SUPPORT 1 PC L CANOPY BAR 2 PCS CUSHION 1 PC |3
PRODUCT ASSEMBLY 1 3 x2 D C 9 x2 10 x2 12 Insert the part D left top bar into the part C right top bar and secure it with two part 3 bolts, two part 9 washers, and two part 10 nuts. x2 Place a part 12 nut cap on every nut. 2 8 x2 A 9 x8 x4 x2 B 12 x8 x8 10 E 4 x4 x2 Attach a part A front leg and part B back leg to the top bar with two part 8 bolts, two part 9 washers, and two part 10 nuts. Attach a part E leg support with two part 4 bolts, two part 9 washers, and two part 10 nuts.
PRODUCT ASSEMBLY 3 F 1 9 12 10 Insert the part F left back support into the part G right back support and secure it with a part 1 bolt, part 9 washer, and part 10 nut. G Place a part 12 nut cap. 4 12 x4 7 10 x4 x4 9 x4 Attach the back support to the frame with four part 7 bolts, four part 9 washers, and four part 10 nuts. Place a part 12 nut cap on every nut.
PRODUCT ASSEMBLY 5 x2 11 Attach the bottom of a part I armrest to the part J seat with a part 6 bolt, part 9 washer, and part 10 nut. Attach the top of the armrest and a part EI swing arm with a part 5 bolt, washer, and nut. x4 EI I x2 J 12 x6 9 x6 x2 5 6 10 x6 x2 Attach another swing arm with a part 2 bolt, washer, and nut. Join the swing arms together with a part 11 spring hook. Repeat on the other side. 2 x2 Place a part 12 nut cap on every nut.
PRODUCT ASSEMBLY 7 Slide two part L canopy bars into the part M canopy. M L 8 x2 K M N Slide the canopy bars/canopy into the canopy frame pieces. Place the part N cushion.
HELP CENTER Question about your product? We're here to help. Visit us at: help.bestchoiceproducts.com CHAT US! Chat Support Product Inquiry Orders FAQ Product Assembly Returns & Refunds PRODUCT WARRANTY INFORMATION All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included.