Quick Start Guide

Features
• Wake up to the radio or a buzzer
• Listen to either AM or FM stations
• Set snooze or sleep functions
• Program up to two dierent alarms
• Prevent losing the time with the pre-installed CR2025
backup battery
• Charge devices with the USB charging port
Front LED display
Back
Top panel
Setting up your clock radio
1 Pull out the plastic tab to activate the pre-installedCR2025
battery.
2 Connect the power adapter from your alarm clock's power jack to
a power outlet. The hour digits blink on the display.
3 Press (down) or (up) repeatedly to set the correct hour, then
press (radio/clock) to save the setting. The minutes digits
blink.
4 Press (down) or (up) repeatedly to set the correct minutes,
then press (radio/clock) to save the setting.
Notes:
• When you set the clock to a time after noon (12 PM), the PM indicator
lights.
• To set the clock again, press and hold (radio/clock) in standby
mode. When the hours digits blink on the display, repeat steps 3–4.
Before using your new product, please read these instructions to prevent any damage.
Package contents
• Alarm clock radio
• AC power adapter
• CR2025 battery
• Quick Setup Guide
AM/FM Dual
Alarm Clock Radio
Quick Setup Guide
BE-CLOPP3
#
1
2
3
4
5
6
7
Description
• Press and hold to turn the radio on or o.
• Press briey to switch between FM and AM.
With the radio turned o:
• Press and hold to set the clock.
With the radio turned on:
• Press briey to move to the next preset radio station.
• Press and hold for two seconds to save a new radio station preset.
• Press and hold for six seconds to automatically search and save radio stations.
With the radio turned o:
• Press briey to turn Alarm 1 on or o.
• Press and hold to set the alarm time.
With the radio turned o:
• Press briey to turn Alarm 2 on or o.
• Press and hold to set the alarm time.
• Press briey to adjust the screen brightness or to snooze when the alarm is
ringing.
• Press and hold to turn o the alarm when the alarm is ringing
• With the radio turned on, press and hold to set the sleep timer (90 min.,
60 min., 45 min., 30 min., 15 min., or OFF).
With the radio turned on:
• Press to tune the radio to the previous or next station.
• Press and hold to search for the station automatically.
When setting the clock:
• Press to set the hours and minutes backward or forward.
When setting the alarm:
• Use to adjust the alarm time, select the alarm mode, or adjust the
alarm volume.
Press to raise or lower the volume.
Item
Radio
power
Radio/Clock
Alarm 1
Alarm 2
Brightness/
Sleep/Snooze
Up/
Down
+ Raise/
- Lower volume
Using the alarm clock
Setting an alarm
1 Press and hold (Alarm 1). The hours digits blink.
2 Press (down) or (up) repeatedly to set the correct hour, then
press (Alarm 1) to save the setting. The minutes digits blink.
3 Press (down) or (up) repeatedly to set the correct minutes, then
press (Alarm 1) to save the setting.
4 Press (down) or (up) to select the alarm ring type (“Bu” for a
buzzer sound or “rAd” for the radio), then press (Alarm 1) to save
the setting.
5 Press (down) or (up) to set the volume, then press (Alarm 1)
to save the setting. Alarm 1 is turned on.
Notes:
• To set Alarm 2, follow these instructions, but press (Alarm 2) instead of
(Alarm 1).
• To turn on an alarm that you’ve previously set, press (Alarm 1) or
(Alarm 2). The Alarm 1 or Alarm 2 indicator is shown on the display
when the alarm is turned on.
Quieting an alarm
• Press SNOOZE briey to mute an alarm for nine minutes. You
can snooze as many times as you need within 59 minutes of the
preset alarm time.
• Press and hold SNOOZE to turn o an alarm for 24 hours. The
alarm stays on to ring the next day.
• Press (Alarm 1) or (Alarm 2) briey to cancel an alarm. The
indicator turns o, and the alarm remains o.
Time/Alarm/Frequency display
Sleep timer indicator
PM indicator
Alarm 1 ON indicator
Alarm 2 ON indicator
Using the radio
1 Press and hold (power) to turn on the radio.
2 Press (power) briey to select either the FM or AM band. The
current station is shown on the screen for 10 seconds, then
clock displays.
Note: If you select the FM band, stretch out the FM antenna on the
back of your clock radio to improve FM reception.
3 To tune into a station:
a. Press (down) or (up) repeatedly to nd the station
you want.
b. Press and hold (down) or (up) to search for the next
available station.
Note: The search may not stop at a station with a weak signal.
4 Press + (raise volume) or – (lower volume) to raise or lower the
volume.
5 When you nish listening, press and hold (power) to turn o
the radio.
Back
Power adapter
Back
Speaker
Power jack
USB port
FM antenna
Plastic tab