Specifications

Besa Lighting Co., Inc. • 6695 Taylor Rd. • Blacklick, OH 43004 • tel [phone] • fax [phone] • www.besalighting.com
Project Information:
All dimensions provided are nominal.
Allowance must be made for dimensional tolerance in handcrafted glasses.
sconces outdoor
location:
WET
SPECIFICATIONS:
DESCRIPTION
Wall-mounted sconce featuring handcrafted frosted glass.
LAMPING
Standard: 60W A19 120V incandescent, suitable for dimming.
CFL: 18W 4-Pin CFL with non-dimming electronic ballast. 120V,
lamp not included.
LED: 7W LED Replaceable source 120V, non-dimmable, included.
DIFFUSER
Wall-mounted sconce featuring handcrafted frosted glass.
CONSTRUCTION
Stamped aluminum fitter is powder coated white.
Glass is secured by stainless steel set screws.
Prismo 10 fitter is 4.125” W x 7.375” H x 0.75” D
Prismo 16 fitter is 4.125” W x 12” H x 0.8” D
MOUNTING
Installs directly to a 4” octagonal outlet box. 75°C supply wire required for incan-
descent lamping. Fixture is centered on the outlet box. 10’ fixture centerline is
0.75” below box centerline. Orient horizontal or vertical, wall-mount only.
LABELS
UL or ETL Listed. Suitable for Wet Locations (interior or exterior use).
PRISMO 16 & PRISMO 10 SHOWN IN FROST/CLEAR
prismo 10 / 16
Prismo 16: #3046Prismo 10: #3045
16”
4.25” 5”
10.5”
4.25” 5”
FIXTURE

LAMP OPTIONS
304604 16” H Frost/Clear (blank) 2x 60W A19 Incan
H1 1x 26W Quad 120V
LED 2x 7W LED 120V,
non-dimmable
Ex. 304604
2 Lt. Prismo 16 Sconce w/ Frost/Clear Glass,
White Finish
FIXTURE

LAMP OPTIONS
304504 10.5” H Frost/Clear (blank) 1x 60W A19 Incan
E1 1x 18W Quad 120V
LED 1x 7W LED 120V,
non-dimmable
ORDERING:
LED SCONCES:
• Total power of only 7 watts
• Non-dimmable
• Rated life: 30,000 hours
• 500 lumens
• CCT: 3000° Kelvin
• CRI: 80+