. .. .. .. .. y RC-P Remote Control Operation Instructions .. .. nar ... P imi rel .. .. .. ......... .. .. . .. . .. ... . . .
Summary Bernafon RC-P Remote Control Description of Features................................................................................ 4 Battery Insertion and Replacement.......................................................5 – 6 Operating your Hearing Instrument with the Remote Control................... 7 Operating Distance...................................................................................... 7 Lock Switch.............................................................................
Inlay The following hearing instrument accessory is outlined in this user instruction: Remote Control (RC- P) This booklet describes how to get the most from your new Bernafon Remote Control. Please follow these instructions for use and care to obtain the best possible benefits from your hearing instruments.
Features 6 1 1 2 3 4 4 2 3 Program Cycle Button Volume Control Favorite Button Status Light 4 5 5 Lanyard Ring 6 Battery Cover 7 Lock Switch 7
Battery Insertion and Replacement The remote control uses a CR-2 type battery. To insert a new battery: • Gently slide the battery cover off. (A) • Make sure that the “+” sign on the battery matches with the “+” sign in the battery compartment. • Place the battery in the compartment making sure that the battery is properly positioned at both ends. (B) • Replace the battery cover, then slide it closed.
Battery Insertion and Replacement Please note: • The battery cover should never be forced. If force is required to close the cover, check the alignment and reposition it so that it slides into place easily. • Battery life will vary depending on conditions of use. Ask your hearing care professional for more information.
Operating your Hearing Instrument with the Remote Control Your hearing instruments can be operated by using the buttons on your remote control. If you have hearing instruments fitted to both ears, the remote control will adjust both at the same time. Operating Distance With the remote control, you can operate your hearing instrument from a distance of up to 1 meter (about the length of your arm). A direct line of sight between the remote control and your hearing instruments is not required.
Lock Switch Your remote control is equipped with a lock switch to prevent accidental operation. • Position the switch to “unlock” with the green dot visible. Your remote control is ready for use. (A) • Position the switch to “lock” with the green dot hidden. Your remote control buttons are deactivated.
Volume Control Program Cycle Button The volume of your hearing instruments may be adjusted as follows: To cycle through the hearing instrument programs with the remote control, press the “●” button. Each push will advance the hearing instruments to the next program in the cycle.
Favorite Button The remote control is equipped with a Favorite Button. By pressing this button, the remote control directs the hearing instruments to a pre-determined “favorite” setting. Favorite Button The function of the Favorite Button has been programmed by your Hearing Care Professional. Press «✱» button to directly access your favorite function.
Status Light The status light indicates remote control operation. It will blink after each button press. Two possibilities will be seen. Red blinking indicates that the remote control is locked. Green blinking indicates that the remote control is unlocked and has sent a command to your hearing instruments. Status light If the light does not blink after a button is pressed, the battery needs to be replaced.
Lanyard Ring For your convenience, it is possible to attach the remote control to a lanyard. In order to mount the lanyard, pull out the ring which is found near the battery compartment. Thread the cord through the ring to attach it to your remote control.
Care of your Remote Control • When changing the battery or cleaning the remote control, hold it over a soft surface to avoid damage if it is accidentally dropped. • Clean the remote control regularly with a dry cloth or tissue. • Avoid getting the remote control wet. • Never attempt to dry the remote control with a hairdryer, in a microwave oven or with any other heating devices. • The remote control should never be exposed to extreme heat, such as on the dashboard or in the glove box of your car.
Environmental Protection Help to protect the environment by not disposing of your remote control or batteries with your unsorted household waste. Please recycle your remote control and batteries or return them to your hearing care professional for disposal. Contact your hearing care professional for more information.
Warnings and Safety Guidelines • You should familiarize yourself completely with this booklet before using your remote control. • The remote control RC-P shall not be used in an aircraft. • A dead battery should be removed as soon as possible. • Used batteries should be returned to your battery supplier or hearing care professional. • Never dispose of batteries by burning them. There is a risk that they may explode and cause injury. • Never dispose of batteries with household waste.
• The remote control is not approved to be operated in explosive environments. Do not use it in mines or other environments with explosive hazards. • The remote control uses digital inductive signals to transmit commands to the hearing instrument. Although extremely unlikely, concerns have been raised that this signal could interfere with medical devices such as pacemakers.
International warranty The Bernafon Remote Control is covered by a limited warranty, covering defects in materials and workmanship, for a period of 12 months from the date of delivery. This warranty covers the remote control itself, but not accessories such as batteries. This warranty becomes invalid if a defect is a result of misuse or maltreatment. This warranty is void if non-authorized personnel have repaired the remote control.
Hereby, Bernafon AG, declares that the remote control RC-P is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the declaration of conformity can be obtained at the above address.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
0682 03.08/BAG/000-00-000-00 Manufacturer: Bernafon AG Morgenstrasse 131 3018 Bern Switzerland: Phone +41 31 998 15 15 Fax + 41 31 998 15 90 www.bernafon.