BeOn A1 Instructions for Use beon-iot.com 231 rue Pierre et Marie Curie, 31670 LABEGE, FRANCE support@beon-iot.com – +33-669-279-727 ©2020 BeOn IoT SAS. All rights reserved.
BeOn A1 General Characteristics Size 190 mm x 25 mm x 25 mm Weight 120g Worldwide Communication Sigfox Monarch (RC1/2/3/4/5/6) Mobile pairing Bluetooth compatible with Android User settings Periodical reporting intervals and event-based reporting Features activation Temperature / shock alert thresholds Internal Sensors GPS & GLONASS Temperature: -20ºC to 60ºC Motion and Shock Detection Operating temperature [-20ºC; 60ºC] Durability • Flame-retardant plastic UL 94V-0 / 0.
Powering BeOn A1 Top view 1. Remove the bottom part of the casing by unscrewing the 2 screws using a PH2 screwdriver. Bottom view 2. Place 4 Energizer L92 cells with minus (-) side of the cell placed on the spring side. Interior view 3. Put the bottom part of the casing and screw it to the product. beon-iot.com 231 rue Pierre et Marie Curie, 31670 LABEGE, FRANCE support@beon-iot.com – +33-669-279-727 ©2020 BeOn IoT SAS. All rights reserved.
Initializing BeOn A1 1. Launch BeOn mobile app with Bluetooth activated. 2. Edit setting with your preferences. 3. Close BeOn mobile app. Place BeOn A1 Attach it to the asset you want to track. You may use the holes available to fasten the device to a vertical or horizontal panel. It is recommended to have the label face up. Side view with holes for vertical panel Example of placement on a container beon-iot.com 231 rue Pierre et Marie Curie, 31670 LABEGE, FRANCE support@beon-iot.
Safety CAUTION: BEON A1 contains four replaceable Energizer L92 AAA batteries. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the local environmental instructions. CAUTION: This equipment may not be modified, altered, or changed in any way without signed written permission from BeOn IoT SAS. Unauthorized modification may void the equipment authorization from the FCC and will void the BeOn IoT SAS warranty.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications.
