Multifunctional Smart Flowerpot CubeGreen User Manual
Cautions 1. In order to prevent the occurrence of accidents that threaten personal safety, such as machine damage, fall, electric shock, fire, etc., please install and use correctly in strict accordance with the instructions, and do not disassemble, transform and replace parts and accessories at will. 2. This machine is only for indoor use and the ambient temperature is in the range of 0-40 ℃ .
Malfunction Reason Troubleshooting 1. Air is gathered in the spray pipe. Reduced water 2. The humidifier is spray or unable to clogged with filter cotton. spray 3. Humidification tank fouling. 1. Turn on the humidifier switch, wait a moment or gently vibrate the fuselage to let the air out. 2. Clean or replace filter cotton. 3. Use citric acid to clean and humidify the water tank, see "Daily cleaning and maintenance" for details. 1.
Environmental Protection List Toxic, Harmful Material or Element Hexavalent Cadmium Chromium (Cd) (Cr6+) Component Lead (Pb) Mercury (Hg) Metal parts X O O X O X O Circuit module Cables and cable assemblies Plastic PBB PBDE O O O O O O O O O O O O O O O O O This form is compiled in accordance with SJ/T 11363-2006. O: indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in SJ/T 113632006.
Product Structure ① Top Cover ② Eye-protective Lamp ③ Extension Rod ④ Injection nozzle (left, Planting water tank) ⑤ Touch Panel ⑥ Humidifier Spray Nozzle ⑦ Air Purifier ⑧ Supplementary Lighting for Plants ⑨ Injection nozzle (right, Humidifying water tank) ⑩ External Barrel -04-
Time and Date Setup Week Temperature Time Date ① Touch Switch (Supplementary Lighting for Plants) ② Touch Switch (Eye-protective Lamp) ③ Touch Switch (Humidifier) ④ Touch Switch (Air Purifier) Time and Date Setup: Function Entry Condition Operation Steps A. The first digit starts to flicker. B. Short press button ② (similar to +) C. Short press button ③ (similar to -) Time Setup Long press ①② for 3 seconds D. Short press ① , the second digit flickers, repeatedly short press button ② or ③ .
Touchscreen Operation Touchscreen Operation Instructions: Entry Condition Description Power On Plug in the adapter; power on The whole machine goes into dormant state or pre-dormant state.
Warranty Statement: The electric parts of the product are guaranteed for one year of repair but there is no warranty for plastic parts since the purchase date. See the warranty card below for details. Note: When you need after-sales service, please contact the local seller. Warranty Card Name: Address: Warranty Period: one year Customer Telephone: Purchasing Date : Please fill details in each column of this card and get it stamped by your dealer, otherwise it will be invalid. 1.
Usage 1.Take out the complete device from the package box and remove the package bag covering the device. 2.Turn the notch on the top cover gently, flip the top cover upward and use a little strength to pull the top cover up to the highest. 3.Take the internal barrel out of the external barrel and then take out accessories inside the internal barrel.
4.Take out water absorbing cotton sliver and tie a knot at one end of the cotton sliver. 5.Put the knotted cotton sliver into the internal barrel. 6. Spread the nonwovens in the inner bucket.
7. Choose the right flowers and plants (dwarf plants are more suitable), mix them with nutritious soil and plant them on an inner bucket with moistureabsorbing sliver and covered with non-woven cloth. 8.Check whether there is filter cotton in the water tank for humidifying inside the external barrel, and then put on the interior covering plate.
9. Put the internal barrel with plants and flowers into the external barrel gently. 10. Insert the watered cup into water filling nozzle and fill water into the water tanks for plantation and humidifying separately. Observe the left and right transparent windows when you are filling water to avoid the water level beyond the top level of those windows (that is the highest water level). Note: Only mineral water, unfiltered tap water or cool boiled water can be filled into the water tank for humidifying.
11. Plug the randomly configured data cable into the TYPE-C socket at the back of the machine, the other end of the data cable is connected with the adapter, and the adapter is plugged into the power outlet that meets the voltage requirements. After being powered on, various functions can be used through the touch screen operation. Note: when choosing an adapter, make sure that the output voltage of the adapter is 5V and the output current is not less than 2A.
Notices for Use 1. The device cannot be soaked into water. 2. Different flowers and plants require different moisture. Please adjust the water level inside the plantation water tank based on their growth features (Some plants do not need to add water, they may only need to sprinkle water on their leaves regularly). 3. In normal uses, please regularly observe the water inside the water tanks for plantation and humidifying through the transparent window.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.