User Manual

Classic Series Monopods

Operating Instructions

Thank you for making Benro your choice for professional photographic

equipment. Your Benro gear is manufactured to provide years of

dependable service. In order to obtain optimum satisfaction and

performance, we suggest that you carefully read these instructions.

Speciﬁcations and design are subject

to change without notice.

75 Virginia Road

North White Plains, NY 10603

T 914.347.3300

F 914.347.3309

info@BenroUSA.com

BenroUSA.com

PAGE 1
Thank you for making Benro your choice for professional photographic equipment. Your Benro gear is manufactured to provide years of dependable service. In order to obtain optimum satisfaction and performance, we suggest that you carefully read these instructions. 75 Virginia Road North White Plains, NY 10603 T 914.347.3300 F 914.347.3309 info@BenroUSA.com BenroUSA.com Specifications and design are subject to change without notice.
PAGE 2
Top Plate Closed Cell Foam Grip Wrist Strap Flip Lock Lever Head Mounting (FIGURES 1 & 2) If your Monopod did not come with a Head, select one of the fine Benro Ballheads or Tilthead that match your size Monopod and install by screwing the Head clockwise onto the 3/8" Mounting Thread of the Top Plate. Once it is hand tight, secure by fully tightening the Head Locking Screw(s) (on select models) from below.