Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Copyright Copyright © 1998 by Amer Peripherals, Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Amer Peripherals, Incorporated.
Serial Number: Date of Purchase: Dealer Information Dealer: Telephone Number: Address: Amer is 2 registered trademark of Amer Incorporated. Other brands and product names and trademarks or registered trademarks of their respective companies. Safety Instructions 1. 2. The AC adapter isolates this equipment from the AC supply. Unplug this product from the wall outlet before cleaning. De not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
This product should be operated with a 2-wire grounding type plug. 1f you are unable to insert the plug into the outlet, contact your electrician to make the necessary outlet changes. Never push objects of any kind, or spill liquid of any kind into this product, Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks.
Table of Contents Table of Contents... Chapter 1 Introduction Unpacking the Package. 1-1 Features Power Management Chapter 2 Getting Started Installing the Monitor Installing the Driver. Chapter 3 Adjusting the \ Monitor A Look at the Control Panel... Adjusting the Monitor, Panel Key Introduction. Making Adjustments Brightness... -2 Chapter 4 Troubleshooting and Useful Hints. 4-1 Troubleshooting 4-1 Maintenance Need More Chapter 5 Specifications.
Introduction Unpacking the Package Check following items. If they are missing or damaged, consult your place of purchase immediately. ¥ LCD monitor with signal cable v' User's manual re ¥ Power cord & adapter 7 & v LCD VGA card Five floppy disks & Locate the model name and the serial number labeled at the bottom of your monitor base. Write down the related information of your monitor and dealer in the space on page ii for future reference.
Features Your Overview F50 has the following features: v Power Saving Function The power management complies with VASE DIMS standard. When the system is idle (off mode), the monitor automatically cuts its power consumption to less than SW. ¥ Green Commitment Your monitor is packaged in recycled packing materials and no Cf Cs are used in the manufacturing process. It is in compliance with the US government's Energy Star standards and the rigorous standards of the Scandinavian countries.
rear design of this device hides all cords in its rear cover, offering you a neat desktop. Wide Viewing Angle and High Brightness Your monitor can offer you wider viewing angle with 140° left to right and 120° up to down. Brightness offers 200 cd/m2. Both can let you enjoy the high qualified screen with great viewing angle. High Contrast Compared to 150:1 in other LCD monitors, this medal offers you 300:1 which has better viewing effect.
Power Management The power management complies with VASE DIMS standard and handles the power saving modes according to pin 27 connector {( PVC ) recognition. The power consumption at NORMAL and OFF modes are as follow. Mod PVC Monitor Adapter LED Re cove e C input power ry time current consumption n Norm High <0.8A <20W | Gere 0 sec al n Off Low <0O.
Getting Started Installing the Monitor This monitor is equipped with an auto-sensing power supply for voltage ranges 100~240V AC, 50~60Hz. 1. Make sure that the system power is turned off. 2. Remove the housing of your PC. 3. Remove the old VGA card and insert the LCD VGA card. Tighten the screw when it’s set up. 4. Replace the housing of your PC. 5. Plug the signal cable to the pi signal connector of the VGA Adapter cutout cable =a card at the rear of PC. 8.
Installing the Driver Insert the 755X WINY Driver Installation disk into the floppy drive A ( or other proper drive ). From the Start menu, select Settings and choose Control Panel. Click Display icon and select Settings. From Change Display Type..., select Adapter Type. Select Change... and Have Disk... . Click OK. Insert CL-GD755X Windows 95 Driver Disk 2 when you are prompted to insert the disk. Click OK. Click Close to exit Display and select Yes to restart computer.
Adjusting the Monitor A Look at the Control Panel ripeness Power Defeater Aver Rich Adjusting the Monitor You can adjust the monitor with the adjustment keys of Brightness to make necessary settings. Panel Key Introduction 0 Brightness adjusts the brightness of the LCD monitor. Making Adjustment Except brightness, all of the settings we frequently make on the CRT monitor are standardized and fixed on the VGA card. Please follow instructions below to make your favorite setting.
Brightness This Display Control adjusts the brightness of the screen display. Tum to the left to increase the brightness of the display and the right to decrease it.
Troubleshooting and Useful Hints Troubleshooting Make sure that your monitor is properly installed if you have encountered any trouble using this product (For hardware installation, see Chapter 2, Getting Started). If the problems persist, check this chapter for possible solutions. v' There is no picture on the screen. Check: QQ LCD’S video signal. The LCD'S video signal must be specified for the monitor. U0 Power saving mode. Press any key and move the mouse to deactivate the mode.
0 Signal connector pin assignments, Replace with a correct one if they are not operative. QO Signal cable connector pins. If there are bent or missing pins, consult your place of purchase. 0) Graphics card. See if the settings are made properly. J Scanning frequency. 0 Reboot the system again. v' Characters look too dark or too light. 0 Adjust related settings. See Chapter 3, Adjusting the Monitor. Maintenance * Do not expose the monitor to direct sunlight or heat. % Da not spill liquid on the monitor.
Need More Help? If your problems remain after checking this manual, please contact your place of purchase or e-mail us at:
LGD Panel Power Supply {Universal} Input voltage Power consumption Max. Resolution Video Input User’s Control Regulatory Compliance Display Area Interface Card Ambient Temperature Operating Storage Humidity Specifications 15.