SMARTIRE® FOR COMMERCIAL SYSTEMS SYSTEM GUIDE Suite 150, 13151 Vanier Place Richmond, BC, Canada, V6V 2J1 info@smartire.com 604.276.9884 www.smartire.
SMARTIRE FOR COMMERCIAL SYSTEM GUIDE Thank-you for purchasing SmarTire for Commercial Systems – the next generation in active tire pressure monitoring. SmarTire for Commercial Systems is an advanced tire pressure monitoring system specifically designed to meet the unique needs of Commercial Systems. SmarTire constantly monitors the tires of your Truck, RV and towed vehicle or trailer and warns you of a tire problem before it becomes dangerous.
FCC NOTICE THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
TABLE OF CONTENTS SMARTIRE® FOR Commercial Systems SYSTEM GUIDE ........................................................... 1 SMARTIRE FOR Commercial Systems SYSTEM GUIDE .............................................................. 2 SmarTire for Commercial Systems: ............................................................................................. 2 Features of SmarTire for Commercial Systems........................................................................... 2 TABLE OF CONTENTS ........
SYSTEM OVERVIEW SYSTEM COMPONENTS HOW SMARTIRE FOR COMMERCIAL SYSTEMS FUNCTIONS 1. Tire data is sent wirelessly to the receiver by in-wheel sensor/transmitters that constantly monitor tire pressure and temperature. Sensors are uniquely labeled to identify specific wheel positions for system installation. 2. The receiver comes pre-programmed with each transmitter’s unique ID number and assigned wheel position.
SENSOR OVERVIEW SmarTire for Commercial Systems offers two kinds of tire pressure / temperature sensors. The Low Pressure Sensor (black) is for smaller Commercial Systems and towed vehicles. It is configured to measure tires with a cold inflation pressure up to 65 PSI. The high pressure sensor (orange) is configured for medium to large Commercial Systems with cold inflation tire pressures up to 160 PSI.
USING SMARTIRE FOR COMMERCIAL SYSTEMS GETTING STARTED When your vehicle is started, your SmarTire system will power up and the Full Function Display (FFD) will briefly flash all of its screen icons, and flash the alert light. The system will then go into stand-by mode, waiting for tire data from the sensors. When your vehicle is driven over 6 mph (10kph), the SmarTire will begin to receive tire data. When all of the tire icons are filled in, the SmarTire has captured data from all of the tires.
MAKING ADJUSTMENTS TO PRE-CONFIGURED SETTINGS SmarTire for Commercial Systems is pre-configured with the default tire pressure settings as described below: 4 WHEEL LOW PRESSURE 4 WHEEL HIGH PRESSURE 6 WHEEL HIGH PRESSURE 8 WHEEL HIGH PRESSURE 6 WHEEL HIGH PRESSURE + 4 WHEEL TOW-BEHIND 8 WHEEL HIGH PRESSURE + 4 WHEEL TOW-BEHIND Cold Inflation Pressure 30 PSI 80 PSI 100 PSI 100 PSI 100 PSI 30 PSI 100 PSI 30 PSI Pressure Deviation Alert +/- 5 PSI +/- 10 PSI +/- 10 PSI +/- 10 PSI +/- 10 PSI
MAINTAINING SMARTIRE FOR COMMERCIAL SYSTEMS Please refer to your “Full Function Display Owner’s Manual” for full instructions regarding postinstallation operating instructions. TIRE ROTATION 4 Wheel System: Refer to Page 19 in the FFD Manual 4+ Wheel System: Refer to Page 22 in the FFD Manual For more updated installation information, please contact your authorized SmarTire dealer, or go to SmarTire’s website at www.smartire.com.
SYSTEM SCOPE OF USE & WARNINGS This tire monitoring system does not in any way replace the need for regular maintenance of the tire pressures and tire conditions. SYSTEM INSTALLATION AND USAGE Warrant of the SmarTire system requires that it has been properly installed and programmed by qualified personnel according to SmarTire Systems Inc. documentation. This includes the Owner’s Manual and any supplementary installation instructions included with system components.
REPLACEMENT PARTS PART NUMBER DESCRIPTION 200.0153 061.4001 Receiver (no cable) Remote Full Function Display (FFD) (with FFD cable) High Pressure Axle Kit (includes two high pressure transmitters and two straps) Low Pressure Axle Kit (includes two low pressure transmitters and two straps) 101.1112 061.1002 101.1020 Antenna Kit, 20’ 101.1040 Antenna Kit, 40’ 101.
