Congratulations If you’ve used a radar detector before, a review of the Quick Reference Guide on pages 4 and 5, and the Programming information on pages 12 and 13 will briefly explain the new features. If this is your first detector, please read the manual in detail to get the most out of your RX55’s performance and features. Please drive safely.
Quick Reference Card H Remove card along perforations Table of Contents H BEL Pro RX55 Quick Reference Card Press the REV button to go from one category to the next VOICE AUTOMUTE CITY MODE SENSITIVITY VG2 (radar detector detector) * Factory Default Settings PwrOn STD PwrOn FST * Standard power-on sequence Voice ON Voice OFF * Voice alerts on aMute ON aMute OFF * AutoMute on City STD City LoX City NoX Letter: H or A or C Vehicle voltage Fast power-on sequence Voice alerts off AutoMute of
Quick Reference Guide To begin using your RX55, just follow these simple steps 1 QuickMount Slot Insert RX55’s adjustable Windshield mount into this slot. Page 6-7 Plug the telephone jack end of the power cord into the side jack of the detector, and plug the lighter adapter end of the power cord into your car’s lighter socket. QuickMount Button Press the button, and slide the Windshield mount into one of its four locking positions.
Installation Power Connection Mounting Location Windshield Mount To power the RX55, plug the small end of the supplied coiled power cord into the telephone-type power jack on RX55’s right side, and plug the lighter adapter into your vehicle’s lighter socket or accessory socket. WARNING: BELTRONICS cannot anticipate the many ways the RX55 can be mounted. It is important that you mount RX55 where it will not impair your view nor present a hazard in case of an accident.
Controls and Features Power On/Off If you prefer, you can turn the AutoMute feature off. See the Programming section for details. To turn the RX55 on, press the PWR button on the left side of the top case. When you turn the RX55 on, it goes through a sequence of alerts. If you prefer, you may program your RX55 for a shorter power-on sequence. See the Programming section for details.
Controls and Features Power Connector Signal Strength Meter VG2 RX55’s new power jack uses a telephonetype connector. This new 6-pin connector works with the included coiled cord, and with our optional new SmartPlug. The SmartPlug is a special power cord that has a power-on indicator, a bright alert light that warns of radar or laser, and a convenient mute button right on the plug. It’s the perfect addition for any car where reaching the detector mute button on the windshield is a stretch.
Programming Overview of Programming There are 7 user-selectable options so you can customize your RX55 for your own preferences. The buttons labeled CITY and BRT are also used to enter the Program Mode, REVIEW (RVW) your current program settings, and to CHANGE (CHG) any settings as desired. The words PROGRAM, RVW, and CHG are located on the top of the detector, and are highlighted graphically. Pages 14-16 explain each option in more detail.
Details of Programming Pilot (Power-on indication) Power-on Sequence AutoMute City Mode Sensitivity Note: When you are using the Dark mode, the display will only show HD, AD, or CD, (Highway-Dark, AutoScan-Dark, or CityDark). PwrOnSTD (Standard) In this setting, each time you turn on the RX55, it will display “BEL RX55,” “Laser,” “Ka-band,” “K-band,” “X-band,” “Safety,” and any changes to factory settings.
Details of Programming Technical Details Safety Warning System VG-2 Alert sws Off Safety Warning System detection off. (factory default) VG2 Off VG2 alert detection off. (factory default) VG2 On VG2 alert detection on. In this setting, RX55 will alert you to VG2 signals and automatically shut the detector off for approximately 15 seconds. Once the VG2 signal has passed, RX55 will automatically return to normal operation. NOTE: When VG2 alert is on, other radar detectors can be detected as well.
Technical Details Interpreting Alerts Although the RX55 has a comprehensive warning system and this handbook is as complete as we can make it, only experience will teach you what to expect from your RX55 and how to interpret what it tells you. The specific type of radar being used, the type of transmission (continuous or instant-on) and the location of the radar source affect the radar alerts you receive.
Technical Details How Radar Works Because intrusion alarms and motion sensors often operate on the same frequency as X-Band radar, your RX55 will occasionally receive non-police radar signals. Since these X-Band transmitters are usually contained inside of a building, or aimed toward the ground, they will generally produce much weaker readings than will a true radar encounter.
Technical Details How Safety Radar Works Since Safety radar technology is relatively new, and the number of transmitters in operation is not yet widespread, you will not receive Safety signals on a daily basis. Do not be surprised if you encounter emergency vehicles, road hazards and railroad crossings that are unequipped with these transmitters. As Safety transmitters become more prevalent (the number of operating transmitters is growing every day), these Safety radar signals will become more common.
Troubleshooting Problem Solution Problem Solution RX55 beeps briefly at the same location every day, but no radar source is in sight. • An X-band motion sensor or intrusion alarm is located within range of your route. With time, you will learn predictable patterns of these signals. RX55 will not turn on. • Check to make sure that the RX55 is turned on. • Check that vehicle ignition is ON. • Check that vehicle lighter socket is functional. • Try RX55 in another vehicle.
26 27 Primary reason for purchasing this BELTRONICS product____________________________________ 4. ____________________________________________________________________________ Place of Purchase__________________________________ Date_________ Price____________ 3. ____________________________________________________________________________ Product Purchased________________________ Model___________ Serial Number___________ 2.
Warranty and Accessories BELTRONICS One Year Limited Warranty H Remove card along perforations ATTN CUSTOMER SERVICE BELTRONICS INC 5442 WEST CHESTER RD WEST CHESTER OH 45069-9789 BELTRONICS SPECIFICALLY DISCLAIMS ANY REPRESENTATION OR WARRANTY INCLUDING, BUT NOT LIMITED TO THOSE CONCERNING THE MERCHANTABILITY AND SUITABILITY OF THE PRODUCT FOR A PARTICULAR PURPOSE.