Manualshelf

User's Manual

ManualsBrandsBellmate Holdings ManualsElectronicswireless Thermostat
1234
R250W User manual
Remark: T955WH will transmit when power is on ,press lighting button to stop.
Start operation of RX unit:press “Menu”button,display main menu; hold “Technician setup”button for 3
senconds,display FILTER 0000 and OFF.then press “Next Step”button until display “OUTdOOR SENSOR、
NO”,press “
”or“ ”to select yes, Done to exit.
When transmit for 2 senconds,R251W，R250W units will return to normal
T955WH
specification
1. 32℉～95℉（0℃～37℃）。
Temperature display range: 32℉～95℉（0℃～37℃）
2. 44℉～90℉（7℃～32℃）
Temperature control range: 44℉～90℉（7℃～32℃）
3. Power source:①24V/AC(18～30V)。②2×AA 1.5V(BATTERY)。
4. RF frequence: 916MHz
Time adjustable
1. Press “Menu”then display MAIN MENU icon,enter into set up status
2. Press “set time”then week flash
3. Press
”or“ ”to set week
4. Press “Next step”,hours flash
5. Press “
”or“ ”to set hours
6. Press “Next step”,minute flash
7. Press “
”or “ ”to set minute
8. Press “Done”once to confirm,or auto confirm and exit 2 minutes later
9. Press “Previous Step”to return the previous item, “Next step”to enter the next item when operation.
10.Manual control temperature setting
1)Press “
”or“ ”to control temperature by hand
2)Auto confirm 15 secends later,when working 4 hours later then return PROG,press “Run Schedule”to exit.
Setting
1. Press and hold “Technician setup”button for 3 secends then display 0000 and OFF。
2．But “Next Step”,display CALIBRATE and 0
3．but “Next Step”,display RN、MIN COMP、ON，OFF
4．but “Next Step”,display CO、COMP DELAY、OFF，ON
5．but “Next Step”,display CO， COOL SWING， 0.8， dF。
6．but “Next Step”,display HE， HEAT SWING，0.4，dF。
7．but “Next Step”,display KEY LOCK, PA。
8．but “Next Step”,display HE，HEAT LIMIT，90。
9．but “Next Step”,display CO， COOL LIMIT，44。
10．but “Next Step”,display room temperature , F OR C SET，℉
11．but “Next Step”,display CLOCK SET、12H。
12．but “Next Step”,display MORN RECOV，ON。
13．but “Next Step”,display PROGRAM，
5d。
14．but “Next Step”,display dL，LIGHT，ON。
15．but “Next Step”,display PHONE NUM，OFF。
Remark:only display this item when PHONE NUM is on
16．but “Next Step”,display b，bEEP，ON。
17．but “Next Step”,display HEAT PUMP，OFF。
18．but “Next Step”,can change SYSTEM mode by press “
”or“ ”
19．but “Next Step”,can change fan mode by press “
”or“ ”
20．but “Next Step”,display AG，GAS AUX， OFF，press “ ”or“ ”to select ON or OFF,to confirm press
Done button,or auto confirm and exit 2 minutes later
21．but “Next Step”,display COOL FAN dELAY，OFF。
22．but “Next Step”,display “OUTdOOR SENSOR、NO”，press “
”or“ ”to select YES/NO。when select
YES can learn with R250W unit,then display the temperature of R250W;when select NO can’t learn with

Summary of content (4 pages)