Troubleshooting Guide

1
2
What you’ll need
 A mobile phone with
iOS11 / Android 4.4 or later.
 An USB power adapter
What's in the box
1 Charging cable
2 Vibio bed shaker
USB outlet
Reset hole On/O LED-eyes
Pull 1 to snooze
Pull 2 to turn o
Look for the blinking eyes
 White means it’s activated by an alarm
or communicating with your mobile.
 Blue means it’s ready for pairing.
 Green means it’s charging.
 Yellow means you have an incoming
call or message.
 Red means the battery level is low.
Troubleshooting
ENGLISH
If Try this
The LEDs are blinking in red The battery level is low. Charge Vibio using the supplied cable.
The LEDs don’t light up The batteries are depleted. Charge Vibio for about 1.5 hour.
Vibio doesn’t connect to my
mobile
Start by checking the Bluetooth connection on the app home
screen. If the Vibio icon is red and crossed out, try the following:
1 Move within range. Move your mobile closer to Vibio.
2 Turn Bluetooth O and On. Swipe to open the Control Center /
Quick Settings Panel on your mobile and tap the Bluetooth icon.
If it still doesn’t work, you need to reset and reconnect the Vibio bed
shaker and app manually. Try the following:
1 Force-quit the app. Note that it’s not enough just to close it.
2 Disconnect Vibio. Go to Settings > Bluetooth. Tap / and
Forget This Device to disconnect “Vibio”. Make sure Bluetooth is on.
3 Reset Vibio. Pull and hold the strap until the LED starts to icker.
Release and pull it again until the LEDs starts to breathe in blue.
4 Setup Vibio. Start the Vibio app again and follow the instructions.
Intended use
Personal vibrating alarm device to be
used with a mobile phone application
for wakeup.
Power and Battery
Battery power: 1

3.7 V AA Lithium-ion
Power consumption: Active with strong
vibration: < 1000 mA, Idle: < 100 μA
Operating time: Up to 10 days / charge
Charging time: Up to 1.5 hour @ 500mA
Charging current: Up to 500 mA, 5V DC
Compatibility
iOS11 / Android 4.4 and later,
iPhone 5s and later /
Modern Android devices
Dimensions and weight
Size: 27

94

94 cm, 1.1

3.7

3.7"
Weight: 153 g, 5.4 oz.
Frequency and coverage
Bluetooth frequency: 2402 – 2480 MHz
Output power: Max 2.5mW (4dBm)
Coverage: Up to 30 m, 33 yd, free eld.
Connectivity: Bluetooth 4.2
Cables and connections
Cable length: 1 m, 3.9"
Contacts: USB type A to USB Micro-B
Maintenance and cleaning
Maintenance free. Clean with a dry cloth.
Do not use household cleaners, aerosol
sprays, alcohol or abrasives.
Regulatory requirements
Complies with CE, RCM, BQB, RoHS,
WEEE, Der Grüne punkt
Environmental requirements
For indoor use only
Temperature: 0°– 35° C, 32°– 95° F
Relative humidity: 5% – 95%
Safety and warranty conditions
See separate folder
Bellman & Symfon AB
Södra Långebergsgatan 30, 436 32 Askim,
Sweden. Phone [phone]
E-mail [e-mail]
© and TM 2019, Bellman & Symfon AB,
all rights reserved.
BE1221_019MAN001
Vibio bed shaker, BE1221
BE1221_019MAN001-Vibio-Usermanual-4pages-EN.indd 1 2019-07-04 13:22:42