BELLE 870/30013/0 05/18 DUO 350X GB • Spare Parts Book Operators Manual 14 1 4
EC DECLARATION OF CONFORMITY / DECLARATION CE DE CONFORMITE / DECLARACIÓN DE CONFORMIDAD CE / DECLARAÇÃO CE DE CONFORMIDADE / EG-VERKLARING VAN OVEREENSTEMMING / EF OVERENSSTEMMELSESERKLÆRING GB F E P NL DK We, Belle Group Sheen UK, Sheen, Nr.
EGKONFORMITÄTSERKLÄRUNG / DICHIARAZIONE CE DI CONFORMITÁ / EG-VERKLARING VAN OVEREENSTEMMING / EC SAMSVARSERKLÆRING / EY-YHDENMUKAISUUSILMOITUS / DEKLARACJA ZGODNOSCI Z PRZEPISAMI UE D I S NO SF PL Wir, Belle Group Sheen UK, Sheen, Nr.
GB How To Use This Manual This manual has been written to help you operate and service the ‘Duo 350X’ Floor Saw safely. This manual is intended for dealers and operators of the ‘Duo 350X’ Floor Saw. Foreword The ‘Machine Description’ section helps you to familiarise yourself with the machine’s layout and controls. The ‘Environment’ section gives instructions on how to handle the recycling of discarded apparatus in an environmentally friendly way.
GB Machine Description 15 8 9 10 7 6 11 4 1. 2. Throttle lever. Choke lever. 3. 4. 5. Fuel ON / OFF lever. Air Filter Housing. Engine ON / OFF Switch. 6. 7. Belt Guard. Fuel Tank. 14 5 8. 9. 10. 11. 12. Operating Handle. Exhaust. Engine Oil Filler / Dipstick. Engine Oil Drain Plug. Foot Pedal. 1 2 3 13. Blade Guard. 14. Water Tank. 13 12 15. Water Depth Gauge.
GB Decals A. Blade RPM Decal B. Blade Pointer Decal C Dust Suppression Decal F D. Noise Decal E Low HAV Decal L D E A L J G H B K F. Safety Decal G. Risk of Cutting Decal H. Displacement Warning Decal C J. Blade Fitment Decal K. Blade Safety Decal L. Branding Decals A - Blade RPM Decal (800/99576) The Maximum Blade RPM is 3800. B - Blade Pointer Decal (154.0.047) The Blade rotates clockwise. C - Dust Suppresion Decal (800/99573) WHEN DRY CUTTING, DUST WILL:1.
GB Decals F - Safety Decal (Part No. 19.0.373) Please Read Operators Manual Wear Protective Footwear Wear Ear Protection Wear Eye Protection G - Risk of Cutting Decal (800/99575) Caution, there is a risk of cutting whilst using this machine. H - Displacement Decal (800/99574) All displacement of the machine outside the cutting area shall be carried out with the blade not in rotation. J - Blade Fitment Decal (800/99303) Instructions on how to change a Blade safely.
GB General Safety For your own personal protection and for the safety of those around you, please read and ensure you fully understand the following safety information. It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely. If you are unsure about the safe and correct use of the Duo 350X Floor Saw, consult your supervisor or Altrad Belle. WARNING • • • • • • • • • • • • • • • • • Improper maintenance can be hazardous.
GB Environment Safe Disposal. Instructions for the protection of the environment. The machine contains valuable materials. Take the discarded apparatus and accessories to the relevant recycling facilities. Component Material Handle Steel Hand Grips Rubber Main Frame Steel Petrol Engine Aluminium Various Parts Steel and Aluminium Pre-Start Checks GB Pre start-up inspection.
GB • Operating Instructions Take the Floor Saw to where it is required. If the Floor Saw is to be transported to another location, ensure that the Blade is fully raised in the Guard and that the Engine has been switched OFF. NEVER transport the Floor Saw with the Blade lowered or with the Engine still running, even if it is only being moved a short distance. Check that the Water Outlet Valve is closed, then ¿ll the Water Bottle with clean water.
GB Service and Maintenance CAUTION Improper maintenance can be hazardous. Read and Understand this section before you perform any maintenance, service or repairs. Maintenance The Altrad Belle ‘Duo 350X’ Floor Saw is designed to give many years of trouble free operation. It is, however, important that the simple regular maintenance listed in this section is carried out. It is recommended that an approved Altrad Belle dealer carries out all major maintenance and repairs.
GB Blade Fitment CAUTION WARNING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Incorrect ¿tting of a Blade can cause serious injury. Ensure that the ¿tting instructions are followed. If in any doubt, Contact your supervisor or Altrad Belle. DO NOT operate the Floor Saw with the Blade Guard in the raised position. This may caused serious injury. Remove the HT lead from the Spark Plug. Raise the front of the Floor Saw to its maximum height using the foot pedal.
Warranty Your new Altrad Belle Duo 350X Floor Saw is warranted to the original purchaser for a period of one-year (12 months) from the original date of purchase. The Altrad Belle warranty is against defects in design, materials an workmanship. The following are not covered under the Altrad Belle warranty: 1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a result of failure to follow assembly, operation or user maintenance instructions. 2.