For Models: B F403
Preparation/Assembly 1 Remove rubber washer, metal washerand lock from the spout shank. 2 Insert faucet body through the correct faucet hole in the sink. Slide the rubber washer and metal washer up the mounting shank and secure faucet body with lock nut. 3 Fix the ball onto the shower hose , then joint the shower hose with the connector.
Installation 4 Connect the inlet hose from the body,"Red" for connecting to the hot water, and "Blue" for connecting to the cold water. 5 After installing faucet, remove pull-down spray and turn on water to remove any leftover debris .Re-assemble spray.
Parts Breakdown Spray head Spout Spray hose Cartridge Hex wrench Nut Handle cap Handle Base O-ring Trim cup Weight Hose Fixing assy Lock nut Parts Diagram