Watch live and recorded TV on your mobile devices—anywhere. @TVplus User Manual G1V1000 • 8820ed01176uk Rev.
Table Of Contents SETUP AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Connecting to your cable or satellite set-top box . . . . . . . . . . . . . . 3 Installing and Setting up the Adapter . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting to your cable or satellite set-top box . . . . . . . . . . . . . . 5 Accessing your TV, Anywhere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Tech support, Regulatory and Warranty . . . . . . . . . . . .
SETUP AND INSTALLATION 1. Getting @TV connected to your home network The @TV setup software for PC and Mac is the best way to configure @TV. Visit http://www.belkin.com/mytveverywhere to download the software. a.Wired i. Direct connection via an Ethernet cable will provide the best possible performance for your @TV product. Simply connect the cable to one of the open ports on your broadband-connected network router and then to the Ethernet port on your @TV. ii.
SETUP AND INSTALLATION c. Advanced network connections @TV will use UPnP to configure our network connection. In some cases you will need to use your router’s setup pages to change a few settings. i. Apple using 3G/4G 1. In order to access @TV on a 3G or 4G network using an Apple product like an iPhone, you may need to modify your Port Forwarding settings.
Connecting to your cable or satellite set-top box 2. Connecting to your cable or satellite set-top box ii. Audio inputs: your @TV has a traditional RCA-style composite input available for both the right and left channels of audio from your cable or satellite box. c. Other issues i.
Installing and Setting up the Adapter 1. Input a. Component vs. Composite i. Allows you to select which input on your @TV you would like to use. We recommend using component as it provides the highest video quality. ii. I t is possible to attach two separate devices to @TV and toggle between these inputs in your App.
Connecting to your cable or satellite set-top box 2. Device/STB f. Show all commands/test i. This button allows you to test remote commands to make sure that you have the proper settings in place. We recommend that you select the “Show all commands” box and test multiple commands to ensure your setup is perfect. This section is used to manually configure your remote control settings so that your @TV can control your set-top box.
Connecting to your cable or satellite set-top box 3. IR-Learning b. From the list below, select the command that you are trying to capture and then click “Learn.” In this section you can help your @TV “learn” remote commands. This is particularly useful if you have a cable or satellite box not currently supported by @TV. The steps are as follows: c. F ollow the onscreen instructions and repeat until you capture all of the remote commands you will need to control your cable or satellite box. a.
Installing and Setting up the Adapter 4. IR-Channel Tuning a. C able and set-top boxes vary in what they require when you enter a channel. For instance, on some boxes going to channel 42 requires just that you enter 42 while on another you must enter 042 or 0042. This section allows you to manually configure your @ TV so that it works well with your set-top box.
Connecting to your cable or satellite set-top box 5. Wake-up a. S ome boxes require a “wake-up” command; in this section you can automatically set that command when you start streaming from your settop box to your @TV app. For most cable or satellite boxes, these commands are automatically configured when you select that code set. However, in some cases you may want to adjust the settings.
Connecting to your cable or satellite set-top box ii. Network This section allows you to manually configure how your @TV interacts with your home network. 1. Radio Here you can adjust how your @TV uses its Wi-Fi capabilities. a. Ad-Hoc vs. Client Mode vs. Radio Off i. Select the mode appropriate to your network setup; Radio Off means Wi-Fi is turned off ii. Most setups will only use Client Mode b.SSID i. You can either choose your network from the dropdown list or manually enter your network name. ii.
Connecting to your cable or satellite set-top box 2. Client IP Settings – Manual Configuration This is for advanced network users to give your @TV a specific IP address and/or DNS server address. iii. Admin 1.
Connecting to your cable or satellite set-top box iv. Update 2. Firmware a. Firmware is the software code that runs inside your @TV box. We recommend that you allow it to automatically check for updates every day. You can also manually update it by downloading the firmware from the @TV support website and using the “manually select” feature. 1. Software a. Use the version of your @TV setup software for troubleshooting and also automatically update it to the latest version.
Connecting to your cable or satellite set-top box v. Info 2. Ports a. Allows you to test to see whether your Port Forwarding settings are correct and working properly. b. UPnP is an automated approach to configuring your router; most routers allow @TV to automatically configure your router ports using this feature. c. For routers that do not have UPnP compatibility, you will have to manually configure the ports.
Accessing your TV, Anywhere 3. Accessing your TV, Anywhere ii. @ TV optimizes the video and audio stream it sends based on the types of devices that are receiving the stream. In the case of multiple streams in your home, the device that has the lowest resolution and lowest available bandwidth will determine the video feeds all of the other devices will receive.
Tech support, Regulatory and Warranty Technical Support Country Number Internet adress AUSTRIA 0820 200766 www.belkin.com/de/networking/ BELGIUM 07 07 00 073 www.belkin.com/nl/networking/ www.belkin.com/fr/networking/ CZECH REPUBLIC 239 000 406 www.belkin.com/uk/networking/ DENMARK 701 22 403 www.belkin.com/uk/networking/ FINLAND 0972519123 www.belkin.com/uk/networking/ FRANCE 08 - 25 54 00 26 www.belkin.com/fr/networking/ GERMANY 0180 - 500 57 09 www.belkin.
Tech support, Regulatory and Warranty Belkin International, Inc., Limited 2-Year Product Warranty What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Tech support, Regulatory and Warranty How to get service. To get service for your Belkin product you must take the following steps: 2. Your Belkin Customer Service Representative will then instruct you on how to forward your receipt and Belkin product and how to proceed with your claim. 1. Contact Belkin Tech Support at the number listed on page 14, within 15 days of the Occurrence. Be prepared to provide the following information: a. T he part number of the Belkin product. b.
Tech support, Regulatory and Warranty How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Tech support, Regulatory and Warranty Regulatory and Safety Information • Reorient or relocate the receiving antenna. • Increase the distance between the equipment and the receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. DECLARATION OF CONFORMITY WITH ELECTROMAGNETIC COMPATIBILITY AND ELECTROMAGNETIC INTERFERENCE We, Belkin International, Inc.
© 2012 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United Kingdom Belkin SAS 130 rue de Silly 92100 Boulogne-Billancourt, France Belkin GmbH Otto-Hahn-Straße 20 85609 Aschheim Germany Belkin Iberia Avda de Barajas, 24, Edificio Gamma, 4ªpta, 28108 Alcobendas Madrid - Spain Belkin Italy & Greece Via Nino Bonnet, 4/6 Milan 20154 Italy Belkin B.V.
