Installation Manual

Connecting the Belkin INC002 to your

computer

The Belkin USB-C® Dual Display Dock, INC002 can charge your computer and provide multiple

peripheral outputs—all with a single cable. While this makes it simple to use, the Belkin INC002

uses DisplayLink® technology and requires installing of DisplayLink drivers on your laptop before

using the external displays. This article will walk you through setting up the dock with your laptop.

Before you begin

Before connecting the dock to your computer, you will need to download the DisplayLink drivers for

your computer. If the DisplayLink drivers are not installed on your computer, the dock will connect

but you will not be able to use the dual HDMI ports for video output. DisplayLink drivers are

available on the DisplayLink website for both Windows® and macOS® computers.

• Download DisplayLink drivers for Windows computers

• Download DisplayLink drivers for macOS computers

NOTE: Belkin is not associated with DisplayLink. Displaylink drivers are developed and hosted by

DisplayLink.

Connecting the dock to your laptop

Step 1:

Connect the included power adapter to an AC outlet and then into the DC power jack on the back of

the dock. Press the power button to power up the device. The power light on the front of the dock

will then turn blue.

PAGE 1
Connecting the Belkin INC002 to your computer The Belkin USB-C® Dual Display Dock, INC002 can charge your computer and provide multiple peripheral outputs—all with a single cable. While this makes it simple to use, the Belkin INC002 uses DisplayLink® technology and requires installing of DisplayLink drivers on your laptop before using the external displays. This article will walk you through setting up the dock with your laptop.
PAGE 2
Step 2: Connect the included USB-C cable to a video and charging enabled USB-C port on your laptop and connect the other end to the USB-C port on the front of the dock. The power light on the dock will turn green to indicate that your computer is recognized.