WIRELESS DUAL BAND TRAVEL ROUTER GO N300 DB User Manual F9K1107 8820nt00920uk Rev.
Table Of Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Troubleshooting, Support, and Warranty . . . . . . . . . . . . . . . . . . . 12 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started What’s in the Box Initial Setup Wireless Dual-Band Travel Router 1. Connect your Router to the Ethernet (network) connector in your hotel room. (You may use either the cable provided by the hotel or the cable provided with your Travel Router.) Carrying Case Ethernet Cable Power Supply with UK and EU adapters CD with User Manual In some regions, the Travel Router includes Plug Adapters to support the various plug types in your region.
Getting Started 3. Connect the power adapter to the Travel Router using the provided cable. 2. If you purchased your Travel Router in Europe or Asia, it shipped with adapters for the various plug types in your region. Please attach the appropriate plug type to the power adapter.
Getting Started Manual Setup Using Your Browser 4. Plug the power adapter into the wall to start up your Travel Router. In your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup option, type “192.168.2.1” into your browser (you do not need to type in anything else such as “http://” or “www”). Then press the Enter key. 5. Connect your devices to your Wi-Fi ® network.
Getting to Know Your Router Front Panel B) Wi-Fi Protected Setup (WPS) Light and Button The WPS button on the front of your Router can be used to help establish a secure connection between your Router and other WPS-enabled Wi-Fi devices such as computers. To use the WPS feature on your Router, refer to the Router’s web interface. The small light near the WPS button shows what is happening while you are using WPS to establish a connection.
Getting to Know Your Router Back Panel Reset Button There is a reset button on the bottom of the Router, which can be depressed using a paper clip or other small object. You may use this button if you need to reset the Travel Router for some reason. See the Troubleshooting section for more details. B A A) WAN Connector Connect your hotel Internet connection to this port using the Ethernet cable provided by the hotel or the cable included with your Router.
Technical Details System Requirements Technical Features • Broadband Internet service with RJ45 Ethernet connection Wireless Standards with Link Rate: • IEEE 802.11n (up to 150Mbps*) • IEEE 802.11g (up to 54Mbps*) • IEEE 802.11a (up to 54Mbps*) • IEEE 802.11b (up to 11Mbps*) • At least one computer with: Installed wireless network interface card and TCP/IP protocol Windows ® XP 32 (SP3 or greater), Windows Vista® 32/64, or Windows 7® 32/64; or Mac OS ® X v10.5 or v10.
Using Your Router Opening the Router Firmware’s Web Interface Updating the Router’s Firmware via the Web Interface In your browser, type “http://router” (you do not need to type in anything else such as “www”). Then press the Enter key. If you’re still having trouble running the manual setup option, type “192.168.2.1” in your browser (you do not need to type in anything else such as “http://” or “www”). Then press the Enter key.
using your router 7. Click on “Firmware Update” toward the bottom of the left-hand menu. 9. Select the firmware file by left-clicking on it and then click the “Open” button in the lower-right corner of the window. This will take you back into the Router’s interface. 8. Click the “Browse” button toward the middle of the screen to search for the file you saved previously. Note: The firmware version in the image below is depicted as an example.
using your router Resetting the Router 10. Click the “Update” button. Reset Button The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your custom password. 11.
using your router Restoring the Router to Default Settings Using the Web Interface 4. Click on “Restore Factory Defaults” in the left-hand column under the “Utilities” heading. Symptoms You need to restore the factory defaults using the web interface. This may be because the Router is not performing as expected or you wish to remove all previously configured settings. Setup steps 1. Open a web browser on the computer. 2. In the address bar of the web browser, type “http://192.168.2.1”. 5.
using your router 6. A warning box will open that says, “Warning: All your settings will be lost. Are you sure you want to do this?” Click “OK.” 7. The Router will begin the restoring process. Once the restore is complete, the Router will reboot. Note: This may take several minutes. Your Router has successfully been restored to its factory settings.
Troubleshooting, Support, and Warranty Troubleshooting My wireless network performance is slow, inconsistent, suffers from weak signal, or I’m having difficulty maintaining a VPN connection. I can’t connect to the Internet wirelessly. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices increases.
Troubleshooting, Support, and Warranty Limiting the wireless transmit rate I am having difficulty setting up WPA security on my Router. Limiting the wireless transmit rate can help improve range and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property in Windows, go to the Windows Control Panel, open “Network Connections,” and doubleclick on your wireless card’s connection.
Troubleshooting, Support, and Warranty I am having difficulty setting up Wired Equivalent Privacy (WEP) security on my Router. 1. Log in to your Router. Visit http://router/ with your web browser. Click on the “Login” button in the top right-hand corner of the screen. You will be asked to enter your password. If you have never set a password, leave the “Password” field blank and click “Submit.” 2. Click “Wireless” in the left-hand menu. Then click “Security” just below that. 3.
Troubleshooting, Support, and Warranty Technical Support Country Number Internet adress AUSTRIA 0820 200766 www.belkin.com/de/networking/ BELGIUM 07 07 00 073 www.belkin.com/nl/networking/ www.belkin.com/fr/networking/ UK http://www.belkin.com/uk/support CZECH REPUBLIC 239 000 406 www.belkin.com/uk/networking/ DENMARK 701 22 403 www.belkin.com/uk/networking/ Australia http://www.belkin.com/au/support FINLAND 0972519123 www.belkin.com/uk/networking/ FRANCE 08 - 25 54 00 26 www.belkin.
Troubleshooting, Support, and Warranty Belkin International, Inc., Limited 2-Year Product Warranty What is not covered by this warranty? All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
Troubleshooting, Support, and Warranty Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser.
Regulatory Information FCC Statement Federal Communications Commission Notice DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the device, F9K1107, complies with Part 15 of the FCC Rules.
Regulatory Information European Compliance Statement: Belkin International hereby declares that this F9K1107 WIRELESS DUAL BAND TRAVEL ROUTER is in compliance with the essential requirements and other revelant provisions of the RTT&E Directive 1999/5/EC, the EMC Directive 2004/108/ EC, and the Low Voltage Directive 2006/5/EC. Conformity was assessed using a Technical Construction File. A copy of the European Union CE marking “Declaration of Conformity” may be obtained at the website: www.belkin.
© 2011 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows, Windows Vista, and Internet Explorer are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac OS and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. Google Chrome is a trademark of Google Inc. F9K1107_8820nt00920uk Belkin Ltd.
