Pairing two devices with the Belkin QODE™ Ultimate Pro and Slim Style Keyboard Cases If you are having trouble pairing a second device to the Belkin QODE™ Keyboard Cases, F5L171, F5L176, and F5L174, you may have to clear the stored settings on the keyboard. You will also need to clear the keyboard from your iPad Air® tablet's Bluetooth® settings and pair it back again. IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth devices previously connected to it.
Step 1: On your iPad, tap . Step 2: Tap Bluetooth. Step 3: Under MY DEVICES, tap the icon next to the name of your keyboard. Step 4: Tap . Step 5: Tap OK to confirm. Step 5: Toggle Bluetooth switch to turn OFF.
Clearing any stored devices from the keyboard memory Press and hold the four corner keys together for 5 seconds to clear out the memory. Once keyboard memory is clear, it will default to pairing mode for Memory Slot 1. Pairing your iPad again Step 1: On your first iPad, turn ON Bluetooth and pair it with the keyboard. It will be on Memory Slot 1. Step 2: Turn on Bluetooth on your second iPad.
Once the first device is paired, switch the keyboard to Memory Slot 2 by pressing the fn and + keys at the same time. Step 4: Pair your second iPad with the keyboard under Memory Slot 2. You have now paired two iPad Air tablets with the your Belkin QODE Keyboard. How to assemble your iPad® Air in the Belkin QODE™ Ultimate Pro Keyboard Case IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth® devices previously connected to it.
Step 2: Push down your iPad and make sure it snugly fits your iPad. Step 3: Once your iPad is inserted to the protective case, attach the fabric hinge at the back of the iPad. You have now assembled your iPad to the Belkin QODE™ Ultimate Pro Keyboard Case. Pairing the Belkin QODE™ Ultimate Pro Keyboard Cases, F5L171 and F5L176 with your iPad Air® tablet The Belkin QODE™ Ultimate Pro Keyboard Case is the ultimate accessory to your iPad Air® and iPad Air® 2.
to the table below for the compatibility of the two models. Model Number Model Name QODE™ Ultimate Pro F5L171 Keyboard Case for iPad Air (App enabled) QODE™ Ultimate Pro F5L176 Keyboard Case for iPad Air 2 (App enabled) Compatibility iPad Air iPad Air 2 NOTE: The Bluetooth Smart Keyboard pairs with other Bluetooth 4.
Step 1: Put your keyboard case into pairing mode by pressing the function the delete key. The keyboard can pair with two (2) devices. You can pair a secondary device by pressing the function key function equal key and and the key. IMPORTANT: Holding either of these key combinations for more than five (5) seconds will clear the memory slot and you will have to pair the keyboard again with a device. Step 2: On your tablet, tap Settings from the Home screen.
Connected. For more information about the Belkin QODE™ Ultimate Pro Keyboard Case for iPad Air and iPad Air 2, click here. Whenever you need to use a different tablet with your Belkin Keyboard, pairing must be performed to ensure that your keyboard is in control of the correct device. IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth® devices previously connected to it.
Step 2: Tap General. Step 3: Tap Bluetooth. Step 4: Toggle Bluetooth to ON.
Step 5: Turn ON the Belkin Keyboard then press and hold the Pair key. NOTE: The Pair key may be different depending on the model of your keyboard. Try to look for the or key. Step 6: The keyboard will show up under Devices on the iPad. Select Belkin Bluetooth Keyboard. Step 7: A code will appear on the screen. Enter this code on the keyboard and press [Enter]. A message will pop up when pairing is successful.
Step 1: Open the Settings on your phone. Step 2: Switch Bluetooth to ON. Step 3: Turn ON the keyboard then press and hold the Pair key. NOTE: The Pair key may be different depending on the model of your keyboard. Try to look for the or key. Step 4: Turn ON Bluetooth connection in Settings > Bluetooth on your Android device, then scan for nearby devices. Step 5: Select Belkin Bluetooth Keyboard. The Android device will notify you when the pairing is successful.
The QODE App can update the firmware on your Belkin QODE™ Ultimate Pro Keyboard Case for iPad Air (App enabled), F5L171 and Belkin QODE™ Ultimate Pro Keyboard Case for iPad Air 2 (App enabled), F5L176. IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth® devices previously connected to it. Also, if the keyboard layout of your device is different from that of your Hardware Keyboard, you must change the keyboard language to update the output.
the firmware of the QODE Keyboard. Step 1: Launch the App. Step 2: Tap Select Keyboard. Step 3: Tap on your keyboard name.
Step 4: Tap YES to confirm. Step 5: Tap Pair to continue. Update will begin shortly. This should take 2-3 minutes.
IMPORTANT: Do NOT exit the App or touch the keyboard keys. After a successful update, your QODE Keyboard will have the most current firmware.
The steps below will guide you on how to clear the stored settings on your iPad Air® and on the Belkin Keyboard. Clearing the stored Keyboard settings from your iPad’s Bluetooth® memory Clearing any stored devices from the Keyboard memory Clearing the stored Keyboard settings from your iPad’s Bluetooth® memory Step 1: On your iPad, tap .
Step 2: Tap Bluetooth. Step 3: Under MY DEVICES, tap the icon next to the name of your Keyboard. NOTE: If you don't see your Keyboard's name here, you haven't successfully paired your devices before. To learn how to do this, click here. Step 4: Tap .
Step 5: Tap OK to confirm. Step 6: Toggle Bluetooth switch to turn OFF. You have now cleared the stored Keyboard settings from your iPad’s Bluetooth memory. Clearing any stored devices from the Keyboard memory Press and hold the four corner keys together for five (5) seconds to clear out the memory.
To know more about the keys of your Keyboard, click here. Once the keyboard memory is clear, it will default to pairing mode for Memory Slot 1. NOTE: If a device is paired to Memory Slot 1 of the Keyboard but Memory Slot 2 is empty, switching to Memory Slot 2 will cause the device stored in Memory Slot 1 to lose connection with the Keyboard. To regain connection on your Keyboard manually, connect to it on your iPad by selecting the Keyboard from the Bluetooth® Devices list.
Keyboards NOTE: If your product is not on the list and you can’t find the product numbers on its sticker or on the device itself, try to check its package or box’s exterior sides and look for its barcode section and/or sticker. Routers Locate the model number and version number at the bottom of the device. The version number starts with v or ver. If there is no version number following the model number, then you have a version 1 router.
Network Adapters Locate the sticker at the back of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 network adapter. NOTE: The images below may vary depending on the network adapter that you are using.
QUICK TIP: If you can't find any product number on your device, check the bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker. KVMs Locate the sticker at the bottom of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 KVM.
NOTE: The images below may vary depending on the KVM that you are using. QUICK TIP: If you can't find any product number on your device, check the bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker.
Thunderbolt Express Dock Locate the sticker at the bottom of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 Thunderbolt Express Dock. NOTE: The images below may vary depending on the Thunderbolt device that you are using.
QUICK TIP: If you can't find any product number on your device, check the bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker. NetCam Locate the sticker at the back of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 NetCam. NOTE: The images below may vary depending on the NetCam that you are using.
bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker. Range Extender Locate the sticker at the back of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 Range Extender. NOTE: The image below may vary depending on the Range Extender that you are using.
QUICK TIP: If you can't find any product number on your device, check the bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker. WEMO Locate the sticker at the back of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 WEMO. NOTE: The images below may vary depending on the WEMO product that you are using.
QUICK TIP: If you can't find any product number on your device, check the bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker. Hubs Locate the sticker at the back of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 hub. NOTE: The images below may vary depending on the hub that you are using.
QUICK TIP: If you can't find any product number on your device, check the bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker. Keyboards Locate the sticker at the back of the device. The version starts with v or ver. If there is no version number following the model number, then you have a version 1 keyboard. NOTE: The images below may vary depending on the keyboard that you are using.
QUICK TIP: If you can't find any product number on your device, check the bottom or all exterior sides of its box or package and look for the barcode section and/or its sticker. Charging the Belkin QODE™ Ultimate Pro Keyboard Case, F5L171 and F5L176 IMPORTANT: Before using your Belkin QODE Keyboard, make sure to disconnect the Bluetooth® devices previously connected to it.
Step 2: Insert one end of the charging cable to the keyboard and the other end to an available charger plugged to a power outlet or a computer. NOTE: A red indicator lights up if it is charging and will turn blue when fully charged.