Bluetooth™ HeadSet Experience the freedom of wireless communication La communication sans fil en toute liberté Entdecken Sie die Bewegungsfreiheit von kabelloser Kommunikation Ervaar de vrijheid die draadloze communicatie u biedt Experimente la libertad de la comunicación inalámbrica Tutta la libertà della comunicazione wireless En Fr De Nl Es It User Manual Manuel de l'utilisateur Benutzerhandbuch Handleiding Manual del usuario Manuale utente F8T064ea P75048ea
Bluetooth™ HeadSet Experience the freedom of wireless communication En User Manual F8T064ea P75048ea
Contents Safety Approvals and Certification .......................................................................................................... 2 Introduction ............................................................................................................................................. 4 Headset Features .................................................................................................................................... 6 Charging the Headset .............................
Safety Approvals and Certification Users are advised not to make changes or modify the device in any way. Changes or modifications not expressly approved by Belkin will void the warranty. FCC Notices This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation.
CE Statement Important Notice: This device is a 2.4GHz FHSS Bluetooth headset, intended for office and home uses in all EU and EFTA member states. The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U.S.A. and licensed to Belkin.
Introduction Congratulations on your purchase of a Belkin Bluetooth Headset. The Bluetooth Headset is quite light, weighing just about 10g. It has both Headset and Hands-Free profiles for more functions, and is compatible with more Bluetooth wireless technology mobile phones. Read this user’s guide carefully before you start using Belkin Bluetooth Headset.
Bluetooth Wireless Technology The Bluetooth wireless technology is set to revolutionize the personal connectivity market by providing freedom from wired connections. It is a specification for a small form-factor, low-cost radio solution providing links between mobile computers, mobile phones and other portable and handheld devices, and connectivity to the Internet.
Headset Features 1. Talk Button: Switches the headset on/off, answers/ends a call, pairs the headset with a device, and is used for voice dialing. 2. Volume Up Button: Increases the speaker volume. 3. Volume Down Button: Decreases the speaker volume. 4. LED Indicator: Displays the status of the headset. 5. Microphone: Picks up external audio. 6. Earpiece: Holds the headset in the ear. 7. Speaker: Plays incoming audio. 8. Charging Port: Charges the battery.
Charging the Headset The headset has a rechargeable battery. Before using the headset for the first time, you have to charge the headset battery for approximate 2 hours to get a full charge. A fully charged battery provides up to 7 hours of talk time and over 1 week of standby time. En When the battery is low, the LED indicator flashes red. The low battery warning indication will begin three minutes of talk time before the headset runs out of power.
To charge the headset: 1. Connect the AC adapter to the desktop charger, then plug into an electrical outlet. 2. Place the headset in the desktop charger. 3. During charging, the red indicator light on the desktop charger illuminates. 4. When the battery is fully charged, the indicator light on the charger turns green. 5. You can now remove the headset from the desktop charger, and disconnect the desktop charger from the AC adapter.
Wearing the Headset The Belkin Bluetooth Headset can be worn either on the right or left ear. The earpiece is adjustable, and the 90-degree, rotatable design ensures a snug yet comfortable fit in your ear. To put on the headset, please follow the instructions as below: 1. Directly put the earpiece into your outer ear canal. 2. Adjust the headset to fit your ear. 3. The microphone should be positioned towards to your mouth.
Wearing the Clip or shap Easy to carring via Clip or carring strap. Putting on the Headset 1. Put on the headset with the ear hook behind your ear. 2. Make sure the microphone is pointing towards your mouth.
To adjust the ear hook for right-ear use (micro adjustable) To adjust the ear hook for left-ear use (micro adjustable) En Changing cover Suite your style and match your mood with Belkin cut-out-covers. Pull out the current cover as shown, then push your favorite cover in.
Switching the Headset On/Off To switch the headset on 1. Press the Talk button for about 5 seconds until you hear a low tone followed by a high tone. The LED indicator flashes blue four times. 2. The headset switches on and enters standby mode. The LED indicator continuously flashes blue every 3 seconds. To switch the headset off 1. Press the Talk button for about 1 second until you hear a high tone followed by a low tone. The LED Indicator flashes red four times. 2.
To initiate pairing between the headset and a Bluetooth mobile phone in close proximity: 1. Please turn off the headset. 2. Make certain the mobile phone is switched on. 3. Press the Talk button to switch on the headset, and keep the Talk button pressed for 7 seconds until the LED indicator alternates between blue and red. The headset is now ready for pairing with the mobile phone. 4. Perform a device discovery from the mobile phone.
Using the Headset Before using the headset, make sure that (1) the headset is switched on and connected to a paired. Bluetooth mobile phone; (2) the headset is within 10 meters of the phone; and (3) the phone’s Bluetooth feature is on (see your phone’s user’s guide). NOTE: The headset supports both Headset and Hands-Free profiles. Some mobile phones don’t Support all functions listed below. Please consult your phone’s user’s guide.
Rejecting a Call When a call comes and you do not want to answer it, you can press the Talk button for 2 seconds to reject the call. Making a Call You can make a call through: En Voice activation To use voice activation, the mobile phone must support voice dialing. For details on voice dialing, please see your phone’s user’s guide. 1. Press the Talk button once on your headset. 2. After a short tone sounds, speak the name of the person you wish to connect (if he or she has a voice tag in your phone). 3.
Redialing the Last Number To redial the last phone number, press either the Volume Down button for 3 seconds. Volume Control During a call, you can adjust the headset speaker volume. An audio tone is played for each volume up and volume down step. To increase the volume, press the Volume Up button repeatedly until you reach the desired level. To decrease the volume, press the Volume Down button repeatedly until you reach the desired level.
Mute/Un-mute To mute the headset sound during a call, press the Volume Up button and the Volume Down button for 2 seconds, and you hear 1 tones repeated every 20 seconds. Upon activating the mute function, the person on the other side won’t hear you, but you can hear all sound generated from the other side. To un-Mute, press the Volume Up button or the Volume Down button once.
Headset LED Indicator Status Blue LED Turning on 4 times Red LED Turning off Interval Remarks 4 times Pairing mode Flashes blue and red alternatively until the pairing is complete or time out.
Audio Tones Switching on Quick series of 2 tones, low to high Switching off Quick series of 2 tones, high to low Pairing mode 1 tones Incoming call A ring tone at a 2-second interval Mute 1 tones repeated every 20 seconds Un-mute Single tone Low battery 5 rapid tones every 20 seconds in standby mode En Particularly, for Nokia mobile phones All sounds generated from the mobile phone automatically transfer to the headset.
Specifications Standard Compliant with Bluetooth specification v1.1 / v1.2 Chipset BlueCore2-Audio single chipset Profile Supported Bluetooth Headset & Hands-free profiles Radio Frequency 2402 MHz ~2480 MHz Transmitter Power Class 2 (max 4dBm) Transmission Range Up to 10 meters Receiver Sensitivity -78 dBm Charger Power Supply 5VDC / 200 mA Temperature Operating: -20ºC to 60ºC; Storage: -20ºC to 60ºC; Charging: 0ºC to 45ºC Operation Voltage 3.
Limited Warranty Belkin One-year Product Warranty Belkin warrants this product against defects in materials and workmanship for its warranty period. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period with transportation charges prepaid to the authorized Belkin dealer from whom you purchased the product.
Bluetooth ™ HeadSet Belkin Ltd. Express Business Park, Shipton Way Rushden NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Germany +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin B.V.
Bluetooth™ HeadSet La communication sans fil en toute liberté Fr Manuel de l’utilisateur F8T064ea P75048ea
Contenu Certificats d’homologation et de sécurité ............................................................................................... 2 Introduction ............................................................................................................................................. 4 Caractéristiques du casque .................................................................................................................... 6 Mise en charge du casque ....................................
Certificats d’homologation et de sécurité Il est conseillé aux utilisateurs de ne modifier l’appareil en aucune façon. Les modifications qui ne sont pas expressément approuvées par Belkin annuleront la garantie. Avis de la FCC Cet appareil est conforme aux normes énoncées à l’alinéa 15 de la réglementation FCC.
Déclaration CE Remarque importante : Cet appareil est un casque Bluetooth FHSS (à étalement du spectre à saut de fréquence) à 2,4 GHz prévu pour des utilisations bureautiques ou privées dans tous les états membres de l’UE et de l’AELE. Les marques de commerce Bluetooth sont la propriété de Bluetooth SIG, Inc., U.S.A. et sont accordées sous licence à Belkin.
Introduction Merci d’avoir choisi un casque Bluetooth Belkin. Le casque Bluetooth est très léger avec un poids d’environ 10 g. Il possède à la fois un profil casque et un profil mains libres pour davantage de fonctions. En outre, il est compatible avec un grand nombre de téléphones portables sans fil Bluetooth. Veuillez lire attentivement ce mode d’emploi avant de commencer à utiliser le casque Bluetooth de Belkin.
Technologie sans fil Bluetooth La technologie sans fil Bluetooth va révolutionner le marché des connexions personnelles en permettant une totale liberté par rapport aux connexions filaires. Il s’agit d’une solution radio à petit facteur de forme et à faible coût qui permet de relier des ordinateurs portables, des téléphones portables ou autres périphériques portables et de se connecter à Internet.
Caractéristiques du casque 1. Bouton Parler : allume/éteint le casque, répond à un appel/raccroche, associe le casque à un appareil et permet de composer le numéro vocal. 2. Bouton Augmenter le volume : augmente le volume de l’écouteur. 3. Bouton Baisser le volume : réduit le volume de l’écouteur. 4. Voyant lumineux : indique le statut du casque. 5. Microphone : reçoit le son externe. 6. Oreillette : maintient le casque dans l’oreille. 7. Écouteur : lit le son entrant. 8.
Mise en charge du casque Le casque est équipé d’une batterie rechargeable. Avant d’utiliser le casque pour la première fois, vous devez charger sa batterie pendant environ 2 heures pour que la charge soit complète. Une batterie entièrement chargée fournit jusqu’à 7 heures de conversation et plus d’une semaine de veille. Fr Lorsque la batterie est faible, le voyant lumineux émet une lumière rouge. Cette indication apparait lorsqu’il vous reste trois minutes de discussion. Le casque sera alors déchargé.
Pour charger le casque, procédez comme suit : 1. Branchez l’adaptateur secteur sur le chargeur de bureau, puis branchez-le sur une prise murale. 2. Placez le casque dans le chargeur de bureau. 3. Pendant la charge, le voyant rouge du chargeur de bureau s’allume. 4. Lorsque la batterie est entièrement chargée, le voyant passe au vert sur le chargeur. 5. Vous pouvez maintenant retirer le casque du chargeur de bureau et débrancher le chargeur de l’adaptateur secteur.
Mise en place du casque Le casque Bluetooth de Belkin se porte indifféremment à l’oreille gauche ou à l’oreille droite. L’oreillette est réglable et la conception pivotante à 90 degrés assure une pose ajustée, mais confortable dans l’oreille. Pour installer le casque, procédez comme suit : 1. Placez directement l’oreillette dans le canal extérieur de l’oreille. 2. Réglez le casque pour qu’il s’ajuste à votre oreille. 3. Le micro doit être positionné tourné vers votre bouche.
Utilisation de la pince ou de la bandoulière Facile à transporter grâce à la pince ou à la bandoulière. Installation du casque 1. Installez le casque avec le support derrière l’oreille. 2. Assurez-vous que le micro est dirigé vers la bouche.
Pour ajuster le support sur l’oreille droite (micro réglable) Pour ajuster le support sur l’oreille gauche (micro réglable) Fr Changement de façade Affichez votre style et votre humeur grâce aux façades Belkin. Retirez la façade actuelle comme indiqué, puis enfoncez votre façade préférée.
Mise sous tension/hors tension du casque Pour allumer le casque, procédez comme suit : 1. Appuyez sur le bouton Parler pendant 5 secondes jusqu’à ce que vous entendiez une sonnerie basse suivie d’une sonnerie aigue. Le voyant lumineux clignote quatre fois en bleu. 2. Le casque s’allume et passe en mode veille. Le voyant clignote en continu en bleu toutes les 3 secondes. Pour éteindre le casque, procédez comme suit : 1.
Pour lancer l’association entre le casque et un téléphone portable Bluetooth à proximité, procédez comme suit : 1. Éteignez le casque. 2. Assurez-vous que le téléphone portable est sous tension. 3. Appuyez sur le bouton Parler pour allumer le casque, puis maintenez-le enfoncé pendant 7 secondes jusqu’à ce que le voyant passe du bleu au rouge. Le casque est désormais prêt à être associé au téléphone portable. 4.
Utilisation du casque Avant d’utiliser le casque, assurez-vous que (1) le casque est allumé et connecté à un téléphone portable Bluetooth associé ; (2) le casque se trouve à moins de 10 mètres du téléphone ; et que (3) la fonction Bluetooth du téléphone est activée (reportez-vous au mode d’emploi du téléphone). REMARQUE : Le casque prend en charge les profils Casque et Mains Libres. Certains téléphones portables ne prennent pas en charge toutes les fonctions indiquées ci-dessous.
Refuser un appel Lorsqu’un appel arrive et que vous ne voulez pas y répondre, vous pouvez appuyer sur le bouton Parler pendant 2 secondes pour rejeter l’appel. Appel Vous pouvez appeler au moyen de : Fr Activation vocale Pour Pour 1. 2. 3. utiliser l’activation vocale, le téléphone portable doit prendre en charge la numérotation vocale. plus de détails sur la numérotation vocale, consultez le mode d’emploi de votre téléphone. Appuyez une fois sur le bouton Parler de votre casque.
Rappel du dernier numéro Pour rappeler le dernier numéro, appuyez sur le bouton Baisser le volume pendant 3 secondes. Contrôle du volume Pendant un appel, vous pouvez régler le volume du haut-parleur du casque. Un son se fait entendre pour chaque étape d’augmentation ou de réduction du volume. Pour augmenter le volume, appuyez plusieurs fois sur le bouton Augmenter le volume jusqu’à ce que vous atteigniez le niveau souhaité.
Activation/désactivation du mode silence Pour activer le mode silence sur le casque pendant un appel, appuyez simultanément sur les boutons Augmenter le volume et Baisser le volume pendant 2 secondes. Vous entendrez alors une sonnerie se répéter toutes les 20 secondes. À l’activation de la fonction silence, la personne à l’autre bout du fil ne vous entendra pas, mais vous pourrez entendre tous les sons qu’elle émettra.
Indicateurs lumineux du casque Statut Voyant bleu En cours d’allumage 4 fois En cours de mise hors tension Voyant rouge Intervalle Remarques 4 fois Mode d’association Lumière bleue et rouge en alternance jusqu’à la fin ou au dépassement de délai de l’association.
Sonneries Mise sous tension Série rapide de 2 sonneries, basse et aigue Mise hors tension Série rapide de 2 sonneries, aigue et basse Mode d’association 1 sonnerie Appel entrant Sonnerie à un intervalle de 2 secondes Silence 1 sonnerie répétée toutes les 20 secondes Annulation du mode silence Une seule sonnerie Batterie faible 5 sonneries rapides toutes les 20 secondes en mode veille Fr Particulièrement pour les téléphones portables Nokia Tous les sons générés par le téléphone portable sont a
Caractéristiques techniques Norme Conforme aux spécifications Bluetooth v1.1/v1.2 Composant Composant audio unique BlueCore2 Profils pris en charge Profils Bluetooth Casque et Mains libres Radiofréquences 2402 MHz ~2480 MHz Puissance du transmetteur Classe 2 (4 dBm max.
Garantie limitée Garantie d’un an du produit de Belkin Belkin garantit ce produit contre tout défaut matériel ou de fabrication pendant toute sa période de garantie. Si l’appareil s’avère défectueux, Belkin le réparera ou le remplacera gratuitement, à sa convenance, à condition que le produit soit retourné, port payé, pendant la durée de la garantie, au dépositaire Belkin agréé auprès duquel le produit a été acheté.
Bluetooth ™ HeadSet Belkin Ltd. Express Business Park, Shipton Way Rushden NN10 6GL, Royaume-Uni +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 Fax Belkin GmbH Hanebergstraße 2 80637 Munich, Allemagne +49 (0) 89 143405 0 +49 (0) 89 143405 100 Fax Belkin B.V.
Bluetooth™ HeadSet Entdecken Sie die Bewegungsfreiheit von kabelloser Kommunikation De Benutzerhandbuch F8T064ea P75048ea
Inhalt Sicherheitsmerkmale und Zertifizierung .................................................................................................. 2 Einleitung ................................................................................................................................................ 4 Merkmale des Headsets .......................................................................................................................... 6 Aufladen des Headsets ......................................
Sicherheitsmerkmale und Zertifizierung An dem Gerät sollten keine Änderungen in irgendeiner Form vorgenommen werden. Änderungen oder Modifizierungen, die nicht auf ausdrückliche Anweisung von Belkin vorgenommen werden, führen zum Erlöschen der Garantie. FCC-Hinweise Diese Gerät steht in Einklang mit Teil 15 der FCC-Regelungen.
CE-Erklärung Wichtiger Hinweis: Dieses Gerät ist ein 2.4GHz FHSS Bluetooth-Headset für Büro- und Heimanwendungen in allen EU- und EFTA-Mitgliedsstaaten. Die Bluetooth-Handelsmarken sind Eigentum der Bluetooth SIG, Inc., U.S.A. und für Belkin lizensiert.
Einleitung Wir beglückwünschen Sie zum Kauf eines Bluetooth-Headsets von Belkin! Das Bluetooth-Headset ist sehr leicht, es wiegt kaum mehr als 10g. Es verfügt über Headset- und Freihandfunktionen für größeren Bedienungskonfort und ist mit den meisten Mobiltelefonen mit Bluetooth kompatibel. Lesen Sie dieses Handbuch sorgfältig durch, bevor Sie das Bluetooth-Headset von Belkin verwenden.
Kabellose Bluetooth-Technologie Die Kabellose Bluetooth-Technologie wurde entwickelt, um revolutionäre Veränderungen in der kabellosen persönlichen Kommunikation möglich zu machen. Es ist eine Technik für kleine Geräte; die preiswerte Funktechnik ermöglicht Verbindungen zwischen tragbaren Computern, Mobiltelefonen und anderen tragbaren Geräten sowie mit dem Internet.
Merkmale des Headsets 1. Betriebsschalter: Schaltet das Headset ein/aus, beantwortet/beendet einen Anruf, koppelt das Headset mit einem Gerät und wird für die Stimmwahl verwendet. 2. Lautstärkeschalter 1: Erhöht die Lautstärke. 3. Lautstärkeschalter 2: Vermindert die Lautstärke. 4. LED-Anzeige: Zeigt den Status des Headsets an. 5. Mikrofon: Zur Aufnahme externer Geräusche. 6. Ohrhalterung: Zur Befestigung des Headsets am Ohr. 7. Lautsprecher: Ausgabe eingehender Audiosignale. 8.
Aufladen des Headsets Das Headset funktioniert mit wiederaufladbaren Batterien. Bevor Sie das Headset zum ersten Mal benutzen, müssen Sie die Batterien etwa 2 Stunden lang aufladen, bis diese voll funktionsfähig sind. Eine vollständig geladene Batterie reicht für maximal 7 Stunden Gesprächszeit und eine Woche Standby-Zeit. Wenn die Batterieleistung nachlässt, blinkt die rote LED-Anzeige. Diese Warnung wird drei Minuten vor dem Ausfall der Batterieleistung angezeigt.
Aufladen des Headsets: 1. Verbinden Sie den Netzstecker mit dem Standladegerät und einer Steckdose. 2. Setzen Sie das Headset in das Standladegerät. 3. Während des Ladevorgangs blinkt die rote Anzeige am Ladegerät. 4. Wenn die Batterien aufgeladen sind, leuchtet diese Anzeige wieder grün. 5. Sie können das Headset nun vom Ladegerät nehmen und die Ladestation von der Netzverbindung lösen.
Aufsetzen des Headsets Das Bluetooth-Headset von Belkin kann am rechten oder am linken Ohr getragen werden. Die Ohrhalterung ist einstellbar und um 90° drehbar, sodass Sie es immer komfortabel Ihrem Ohr anpassen können. Um das Headset aufzusetzen, folgen Sie bitte dieser Anleitung: 1. Setzen Sie die Ohrhalterung in den äußeren Gehörgang ein. 2. Passen Sie das Headset Ihrem Ohr an. 3. Das Mikrofon sollte in Richtung Ihres Mundes zeigen.
Tragen des Clips Leicht zu tragen mit einem Clip oder einem Trageband am Hals. Tragen des Headsets 1. Setzen Sie das Headset mit der Ohrbefestigung hinter Ihr Ohr. 2. Das Mikrofon muss dabei in Richtung Ihres Mundes zeigen.
Für das rechte Ohr Für das linke Ohr (Mikro einstellbar) (Mikro einstellbar) De Blende austauschen Wählen Sie nach Ihrem Geschmack aus den Blenden von Belkin aus. Ziehen Sie die aktuelle Blende wie dargestellt heraus und schieben Sie dann das Cover Ihrer Wahl wieder hinein.
Ein- und Ausschalten des Headsets Einschalten des Headsets 1. Drücken Sie den Schalter “Sprechen” oder “Talk” etwa 5 Sekunden lang, bis Sie erst einen tiefen und dann einen hohen Ton hören. Die LED-Anzeige blinkt vier Mal blau. 2. Das Headset wird im Standby-Modus angeschaltet. Die LED-Anzeige blinkt dauerhaft alle drei Sekunden blau. Ausschalten des Headsets 1. Drücken Sie den Schalter “Sprechen” oder “Talk” etwa 1 Sekunde lang, bis Sie erst einen hohen und dann einen tiefen Ton hören.
Um Headset und Bluetooth-Handy miteinander zu koppeln, folgen Sie bitte dieser Anleitung: 1. Schalten Sie das Headset aus. 2. Schalten Sie das Mobiltelefon an. 3. Drücken Sie den Schalter “Sprechen” oder “Talk” am Headset für 7 Sekunden, bis die LEDAnzeige abwechselnd blau und rot blinkt. Das Headset ist nun für die Kopplung mit dem Mobiltelefon bereit. 4. Starten Sie auf Ihrem Mobiltelefon die Gerätesuche. (Für genauere Angaben dazu beachten Sie bitte das Handbuch für Ihr Telefon.) 5.
Verwenden des Headsets Bevor Sie das Headset verwenden, überprüfen Sie, ob (1) das Headset angeschaltet und richtig mit einem Bluetooth-Mobiltelefon gekoppelt ist; (2) sich das Headset innerhalb eines Radius von 10 Metern zum Telefon befindet und (3) die Bluetooth-Funktion des Telefons aktiviert ist (siehe Handbuch für Ihr Telefon). HINWEIS: Das Headset unterstützt Headset- und Freisprech-Profile. Einige Mobiltelefone unterstützen nur einige der unten aufgeführten Funktionen.
Ablehnen eines Anrufs Wenn ein Anruf eingeht, den Sie nicht annehmen möchten, können Sie diesen ablehnen, indem Sie 2 Sekunden lang auf den Schalter “Sprechen” oder “Talk” drücken. Anrufen Sie können einen Anruf folgendermaßen beginnen: Stimmaktivierung Um die Stimmaktivierung zu verwenden, muss Ihr Telefon die sprachgesteuerte Nummernwahl unterstützen. (Für genauere Angaben dazu beachten Sie bitte das Handbuch für Ihr Telefon.) 1. Drücken Sie den Schalter “Sprechen” oder “Talk” am Headset. 2.
Wahlwiederholung Um die letzte Nummer zu wiederholen, drücken Sie die Taste Lautstärkeregelung 2 (Volume Down) für 3 Sekunden. Lautstärkeregulierung Während eines Anrufs können Sie die Lautsprecherlautstärke des Headsets einstellen. Für jeden Lautstärkenschritt, den Sie einstellen, wird ein kurzes Tonsignal ausgegeben. Um die Lautstärke zu erhöhen, drücken Sie die Taste Lautstärkeregelung 1 (Volume up) bis die gewünschte Lautstärke erreicht ist.
Stummschaltung Um das Headset während eines Anrufs stumm zu schalten, drücken Sie die Taste Lautstärkeregelung 1 (Volume up) für 2 Sekunden. Sie hören dann ein Tonsignal, das alle 20 Sekunden wiederholt wird. Wenn diese Funktion aktiviert ist, kann Sie Ihr Gesprächspartner nicht mehr hören, Sie diesen aber wohl. Um die Tonverbindung wieder herzustellen, drücken Sie wieder auf eine Taste für die Lautstärkereglung.
Headset-LED-Anzeige Status Blaue LEDAnzeige Anschalten 4 Mal Rote LEDAnzeige Abschalten Intervall Erläuterungen 4 Mal Kopplungs-Modus Blinkt abwechselnd blau und rot bis die Kopplung abgeschlossen oder zu viel Zeit verstrichen ist (60 Sek.).
Audiotöne Anschalten 2 schnell aufeinanderfolgende Töne, erst tief, dann hoch Ausschalten 2 schnell aufeinanderfolgende Töne, erst hoch, dann tief Kopplungs-Modus 1 Ton Eingehender Anruf Klingelton im 2-SekundenIntervall Stummschaltung 1 Ton, der alle 20 Sekunden wiederholt wird Stummschaltung aus Einzelner Ton Batterie schwach 5 schnell aufeinanderfolgende Töne im 20-Sekunden-Intervall im Standby-Modus De Für Nokia-Telefone Alle Töne, die vom Telefon generiert werden, werden automatisch auf
Technische Daten Standard Entspricht Bluetooth-Spezifikation v1.1 / v1.2 Chipsatz BlueCore2-Audio Single Chipset Unterstützte Profile Bluetooth-Headset- & Freisprech-Profile Funk 2402 MHz ~2480 MHz Übertragungsenergie Klasse 2 (max.
Eingeschränkte Garantie Einjährige Produktgarantie von Belkin Components Belkin Corporation gewährleistet hiermit, dass dieses Produkt während des Garantiezeitraums keine Verarbeitungs- und Materialfehler aufweist. Bei Feststellung eines Fehlers wird Belkin das Produkt nach eigenem Ermessen entweder kostenlos reparieren oder austauschen, sofern es während des Garantiezeitraums ausreichend frankiert an den autorisierten Belkin-Händler zurückgegeben wurde, bei dem es erworben wurde.
Bluetooth ™ HeadSet Belkin Ltd. Express Business Park, Shipton Way Rushden, NN10 6GL, Großbritannien +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 Fax Belkin GmbH Hanebergstraße 2 80637 München, Deutschland +49 (0) 89 143405 0 +49 (0) 89 143405 100 Fax Belkin B.V.
Bluetooth™ HeadSet Ervaar de vrijheid die draadloze communicatie u biedt Nl Handleiding F8T064ea P75048ea
Inhoud Veiligheidskeurmerken en -verklaring ...................................................................................................... 2 Inleiding .................................................................................................................................................. 4 Productkenmerken van de headset ......................................................................................................... 6 Headset opladen ................................................
Veiligheidskeurmerken en -verklaring Wij adviseren u het apparaat op geen enkele manier te veranderen. Veranderingen die Belkin niet schriftelijk heeft goedgekeurd, maken de garantie ongeldig. Kennisgevingen van de Federal Communications Commission (USA) Dit apparaat voldoet aan deel 15 van de FCC-voorschriften.
CE-markering Belangrijke mededeling: Dit apparaat is een 2,4 GHz FHSS Bluetooth-headset die bedoeld is voor zakelijk en privé-gebruik in alle lidstaten van de Europese Unie en de Europese Vrijhandelszone (EFTA). De Bluetooth handelsmerken zijn eigendom van Bluetooth SIG, Inc., Verenigde Staten van Amerika, en in licentie afgestaan aan Belkin Corporation.
Inleiding Gefeliciteerd met uw aankoop van een Bluetooth-headset van Belkin. De Bluetooth-headset is uiterst licht en weegt slechts ongeveer 10 gram. Hij beschikt over headset- en handsfree-profielen voor meerdere functies en is compatibel met andere mobiele telefoons die ook werken met de draadloze Bluetooth-technologie. Lees deze handleiding zorgvuldig door voordat u de Bluetooth-headset van Belkin in gebruik neemt.
Draadloze Bluetooth-technologie De draadloze Bluetooth-technologie betekent een omwenteling op het gebied van persoonlijke connectiviteit doordat draadverbindingen overbodig worden. Het is een specificatie voor korteafs tandscommunicatie, een weinig kostende zend/ontvangsttechniek voor de koppeling van mobiele computers, mobiele telefoons en andere draagbare en handheld-apparaten en bovendien voor connectiviteit met het Internet.
Productkenmerken van de headset 1. Gesprektoets: Voor het in- en uitschakelen van de headset, beantwoorden en beëindigen van gesprekken, paren van de headset met andere apparaten en spraakgestuurd opbellen. 2. Knop voor “Volume omhoog”: Voor het verhogen van het volume an de luidspreker. 3. Knop voor “Volume omlaag”: Voor het zachter zetten van het volume van de luidspreker. 4. LED-indicator: Geeft de status van de headset weer. 5. Microfoon: Neemt geluid op. 6.
Headset opladen De headset bevat een herlaadbare batterij. Voordat u de headset voor het eerst gebruikt, moet u de batterij van de headset ongeveer twee uur lang opladen om deze volledig op te laden. Een volledig opgeladen batterij levert voldoende energie voor maximaal zeven uur spreektijd en ruim een week standbytijd. Wanneer de batterij bijna leeg is, gaat de LED met rood licht knipperen.
Headset opladen: 1. Verbind de desktop-oplader met de netadapter en sluit deze aan op een stopcontact. 2. Plaats de headset in de desktop-oplader. 3. Tijdens het opladen straalt de LED van de desktop-oplader rood licht uit. 4. Wanneer de batterij volledig opgeladen is, straalt de LED van de oplader groen licht uit. 5. U kunt de headset nu uit de desktop-oplader nemen en de stekker van de desktop-oplader uit het stopcontact halen.
Headset dragen U kunt de Bluetooth-headset van Belkin op uw linker of rechter oor dragen. Het oorstukje is verstelbaar en de over 90 graden draaibare vorm zorgt voor een goede en prettige aansluiting op uw oor. U bevestigt de headset als volgt op uw oor: 1. Bevestig het oorstukje rechtstreeks in uw buitenoorkanaal. 2. Stel de headset zo in dat hij goed op uw oor past. 3. Richt de microfoon naar uw mond.
Dragen met clip of halsband Gemakkelijk met de clip of halsband met u mee te dragen. Headset bevestigen 1. Bevestig de headset met de oorhaak achter uw oor. 2. Zorg ervoor dat de microfoon naar uw mond is gericht.
Oorhaak voor het rechter oor instellen (met fijnregeling) Oorhaak voor het linker oor instellen (met fijnregeling) Nl Frontplaatje verwisselen Kies het frontplaatje van Belkin dat bij uw stijl en stemming past. Trek het bestaande plaatje los en druk het gewenste frontplaatje vast. Zie de afbeelding.
Headset in/uitschakelen Headset inschakelen 1. Druk de gesprektoets gedurende ongeveer vijf seconden in totdat u een lage toon hoort gevolgd door een hoge. De LED knippert vier maal met blauw licht. 2. De headset wordt ingeschakeld en gaat in standbymodus. De LED knippert elke drie seconden met blauw licht. Headset uitschakelen 1. Druk de gesprektoets ongeveer één seconde in totdat u een hoge toon hoort gevolgd door een lage. De LED knippert vier maal met rood licht. 2.
Ga als volgt te werk om de headset met een Bluetooth mobiele telefoon in de directe omgeving te paren: 1. Schakel de headset uit. 2. Zorg ervoor dat de mobiele telefoon ingeschakeld is. 3. Schakel de headset met de gesprektoets in en houd deze zeven seconden ingedrukt totdat de LED afwisselend blauw en rood gaat knipperen. De headset is nu klaar om met de mobiele telefoon te paren. 4. Voer met de mobiele telefoon een zoekactie uit.
Headset gebruiken Zorg voor het volgende voordat u de headset gebruikt: (1) de headset moet ingeschakeld zijn en met een gepaarde mobiele Bluetooth-telefoon verbinding hebben; (2) de headset moet zich binnen een straal van tien meter van de telefoon bevinden en (3) de Bluetooth-functie van de telefoon moet geactiveerd zijn (zie de handleiding van uw telefoon). OPMERKING: De headset ondersteunt de profielen Headset en Handsfree. Sommige mobiele telefoons ondersteunen niet alle onderstaande functies.
Gesprekken weigeren Als u wordt opgebeld maar niet wilt opnemen, druk dan twee seconden op de gesprektoets om het gesprek te weigeren. Opbellen U kunt iemand als volgt opbellen: Via spraakactivering Voor het gebruik van spraakactivering moet de telefoon het telefoneren met spraakherkenning ondersteunen. (Zie de handleiding van de mobiele telefoon voor meer informatie over telefoneren met spraakherkenning.) 1. Druk éénmaal op de gesprektoets van uw headset. 2.
Laatste nummer herhalen Druk drie seconden op een van de Volume Down (Geluid zachter)-knoppen om het laatste telefoonnummer te herhalen. Geluidssterkte regelen U kunt de geluidssterkte van de luidspreker van de headset tijdens een telefoongesprek regelen. Bij elke stap harder of zachter hoort u een geluidssignaal. Om de geluidssterkte te verhogen, drukt u meerdere malen op de knop “Volume Up”(Volume omhoog) totdat u het gewenste niveau bereikt.
Stilschakelen/stilschakeling opheffen Om het geluid van de headset tijdens een gesprek stil te schakelen, drukt u de knoppen Volume Up en Volume Down twee seconden in waarna u elke 20 seconden een geluidssignaal hoort. Wanneer u de functie Stilschakelen activeert, kan de persoon aan de andere kant van de lijn u niet horen maar u hoort wel alles wat van de andere kant van de lijn komt. Om de functie Stilschakelen uit te schakelen, drukt u éénmaal op de knop Volume Up of Volume Down.
LED van de headset Status Blauwe LED Inschakelen 4 maal Rode LED Uitschakelen Interval Opmerkingen 4 maal Paringmodus Knippert afwisselend blauw en rood totdat de paring voltooid is of de beschikbare tijd overschreden is.
Geluidssignalen Bij inschakelen Snelle opeenvolging van twee geluidssignalen van laag naar hoog Bij uitschakelen Snelle opeenvolging van twee geluiddsignalen van hoog naar laag Paringmodus Eén geluidssignaal Binnenkomend gesprek Belsignaal met een interval van twee seconden Stilschakelen Eén geluidssignaal dat om de 20 seconden herhaald wordt Stilschakelen opheffen Eén geluiddsignaal Batterij bijna leeg Om de 20 seconden in standbymodus vijf korte geluidssignalen Nl Speciaal voor mobiele tele
Technische gegevens Standaard Voldoet aan de Bluetooth specificaties v1.1 en v1.2 Chipset BlueCore 2 - enkelvoudige audiochipset Ondersteunde profielen Bluetooth Headset- en Handsfree-profielen Radiofrequentie 2402 MHz ~2480 MHz Zendervermogen Klasse 2 (max.
Beperkte garantie Eén jaar productgarantie Belkin biedt gedurende de garantieperiode garantie op dit product voor zover het materiaal- en fabricagefouten betreft. In geval van defecten heeft Belkin de keuze tussen een gratis reparatie of vervanging, op voorwaarde dat het product binnen de garantieperiode wordt teruggebracht naar de leverancier en dat de transportkosten vooruitbetaald worden.
Bluetooth ™ HeadSet Belkin Ltd. Express Business Park, Shipton Way Rushden NN10 6GL, Verenigd Koninkrijk +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin GmbH Hanebergstrasse 2 80637 München, Duitsland +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin B.V.
Bluetooth™ HeadSet Experimente la libertad de la comunicación inalámbrica Es Manual del usuario F8T064ea P75048ea
Contenido Aprobaciones de seguridad y certificación ............................................................................................. 2 Introducción ............................................................................................................................................ 4 Características del manos libres ............................................................................................................. 6 Cargar el manos libres ........................................
Aprobaciones de seguridad y certificación Se recomienda a los usuarios no realizar ningún tipo de cambio ni modificación en el dispositivo. Los cambios o modificaciones que no hayan sido aprobados expresamente por Belkin anularán la garantía. Avisos de la FCC Este dispositivo cumple con la sección 15 de las normas de la FCC.
Declaración de la CE Aviso importante: Este dispositivo es un manos libres Bluetooth de 2,4GHz FHSS, diseñado para ser utilizado en el hogar y oficina en todos los estados miembros de la UE y la EFTA . Las marcas comerciales Bluetooth pertenecen a Bluetooth SIG, Inc., EE.UU. y han sido licenciadas a Belkin.
Introducción Felicidades por adquirir un manos libres Bluetooth de Belkin. El manos libres Bluetooth es muy ligero, ya que únicamente pesa 10gr. Para ofrecer más funciones, presenta los perfiles de auricular y manos libres, y es compatible con más teléfonos móviles con la tecnología inalámbrica Bluetooth. Lea detalladamente esta guía de usuario antes de empezar a utilizar el manos libres Bluetooth de Belkin.
Tecnología inalámbrica Bluetooth La tecnología inalámbrica Bluetooth está llamada a revolucionar el mercado de la conectividad personal al eliminar el cableado en las conexiones. Se trata de la especificación de una solución radio de bajo coste y factor de forma pequeño que posibilita la conexión entre ordenadores portátiles, teléfonos móviles y otros dispositivos de mano y portátiles, así como la conectividad con Internet.
Características del manos libres 1. Botón Hablar: Enciende y apaga el manos libres, responde y corta llamadas, empareja el manos libres con un dispositivo, y sirve para hacer marcación por voz. 2. Botón Subir volumen: Incrementa el volumen del altavoz. 3. Botón Bajar volumen: Reduce el volumen del altavoz. 4. Indicador LED: Muestra el estado del manos libres. 5. Micrófono: Recoge sonido externo. 6. Auricular: Sostiene el manos libres en el oído. 7. Altavoz: Permite escuchar el sonido entrante.
Cargar el manos libres El manos libres tiene una batería recargable. Para que la batería esté completamente cargada antes de utilizar por primera vez el manos libres, debe ponerla a cargar durante unas 2 horas aproximadamente. Una batería totalmente cargada permite hablar hasta 7 horas y más de 1 semana en modo de espera. Cuando la batería se encuentra baja, el indicador LED brilla intermitentemente en rojo.
Para cargar el manos libres: 1. Conecte el adaptador de corriente alterna al cargador de sobremesa, luego conéctelo a una toma de electricidad. 2. Coloque el manos libres en el cargador de sobremesa. 3. Durante la carga, se ilumina la luz indicadora roja que hay en el cargador de sobremesa. 4. Cuando la batería está completamente cargada, la luz indicadora del cargador pasa a color verde. 5.
Colocarse el manos libres El manos libres Bluetooth de Belkin puede ser colocado tanto en el oído derecho como en el izquierdo. El auricular es ajustable y su diseño, que le permite rotar 90 grados, garantiza un ajuste ceñido en su oído y a la vez confortable. Para ponerse el manos libres, siga por favor las indicaciones siguientes: 1. Póngase directamente el auricular dentro de su conducto auditivo externo. 2. Ajuste el manos libres para que se adapte a su oído. 3.
Colocarse el clip o la correa Fácil de llevar utilizando el clip o la correa. Ponerse el manos libres 1. Póngase el manos libres con el gancho auricular por detrás de su oreja. 2. Asegúrese de que el micrófono esté orientado hacia su boca.
Para ajustar el gancho auricular en la oreja derecha (micro ajustable) Para ajustar el gancho auricular en la oreja izquierda (micro ajustable) Es Cambiar la cubierta Combine con su estilo y exprese su estado de ánimo con las cubiertas reemplazables de Belkin. Extraiga la cubierta actual tal y como se muestra, y luego ajuste apretando su cubierta favorita.
Encender y apagar el manos libres Para encender el manos libres 1. Pulse el botón Hablar durante unos 5 segundos hasta que escuche un tono bajo seguido de otro tono alto. El indicador LED brilla intermitentemente en azul cuatro veces. 2. El manos libres se enciende y se queda en espera. El indicador LED brilla intermitentemente en azul cada 3 segundos. Para apagar el manos libres 1. Pulse el botón Hablar durante 1 segundo hasta que escuche un tono alto seguido de otro tono bajo.
Para iniciar el emparejamiento entre el manos libres y un teléfono móvil Bluetooth que se encuentra cerca de él: 1. Por favor, apague el manos libres. 2. Asegúrese de que el teléfono móvil esté encendido. 3. Pulse el botón Hablar para encender el manos libres, y mantenga el botón pulsado durante unos 7 segundos, hasta que el indicador LED brille alternando entre los colores azul y rojo. Ahora el manos libres está preparado para emparejarse con el teléfono móvil. 4.
Utilizar el manos libres Antes de utilizar el manos libres, asegúrese de que (1) el manos libres esté encendido y conectado a un teléfono móvil Bluetooth con el que esté emparejado; (2) el manos libres esté a una distancia inferior a 10 metros del teléfono: y (3) la funcionalidad Bluetooth del teléfono esté activada (consulte la guía de usuario de su teléfono). ATENCIÓN: El manos libres soporta los dos perfiles de auricular y manos libres.
Rechazar una llamada Cuando recibe una llamada y usted no desea responderla, puede pulsar la tecla Hablar durante 2 segundos para rechazar la llamada. Realizar una llamada Puede usted realizar una llamada a través de: Activación por voz Para utilizar la activación por voz, el teléfono móvil debe soportar la marcación por voz. Para más detalles sobre la marcación por voz, por favor consulte la guía de usuario de su teléfono. 1. Pulse una vez el botón Hablar en su manos libres. 2.
Volver a llamar al último número marcado Para volver a marcar el último número de teléfono, pulse el botón Bajar volumen durante 3 segundos. Control de volumen Durante una llamada, puede ajustar el volumen del altavoz del manos libres. Sonará un tono por cada paso de subida o bajada del volumen. Para incrementar el volumen, pulse de forma repetida el botón Subir volumen hasta alcanzar el nivel deseado. Para reducir el volumen, pulse de forma repetida el botón Bajar volumen hasta alcanzar el nivel deseado.
Activar y desactivar el silenciador Para silenciar el sonido del manos libres durante una llamada, pulse el botón Subir volumen y el botón Bajar volumen durante 2 segundos, y escuchará cómo se repite 1 tono cada 20 segundos. Una vez activada esta función, la persona al otro lado no podrá escucharle, pero usted si puede escuchar el sonido generado desde el otro lado. Para desactivar el silenciador, pulse una vez el botón Subir volumen o el botón Bajar volumen.
Indicador LED del manos libres Estado LED azul Encendido 4 veces Apagado LED rojo Intervalo Comentarios 4 veces Modo emparejar Brilla en azul y rojo alternativamente hasta que finalice el emparejamiento o finalice el tiempo.
Tonos de sonido Encendido Serie rápida de 2 tonos, de bajo a alto Apagado Serie rápida de 2 tonos, de alto a bajo Modo emparejar 1 tono Llamada entrante Un tono de llamada a intervalos de 2-segundos Silenciar 1 tono repetido cada 20 segundos Desactivar el silenciador Un solo tono Batería baja 5 tonos rápidos cada 20 segundos en modo de espera Es Particularmente, para teléfonos móviles Nokia Todos los sonidos que son generados por el teléfono móvil se transfieren automáticamente al manos libre
Especificaciones Estándar Cumple con la especificación Bluetooth v1.1 / v1.2 Conjunto de chips Conjunto de chips único BlueCore2-Audio Perfil admitido Perfiles de auricular y manos libres Bluetooth Radiofrecuencia 2402 MHz ~2480 MHz Potencia del transmisor Clase 2 (máx.
Garantía limitada Un año de garantía de producto de Belkin Belkin proporciona para el presente producto una garantía de reparación gratuita, por lo que respecta a mano de obra y materiales durante el período de garantía establecido.
Bluetooth ™ HeadSet Belkin Ltd. Express Business Park, Shipton Way Rushden NN10 6GL, Reino Unido +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Alemania +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin B.V.
Bluetooth™ HeadSet Tutta la libertà della comunicazione wireless It Manuale utente F8T064ea P75048ea
Indice Approvazioni e certificato di sicurezza .................................................................................................... 2 Introduzione ............................................................................................................................................ 4 Caratteristiche dell’auricolare .................................................................................................................. 6 Caricamento dell’auricolare..............................
Approvazioni e certificato di sicurezza Gli utenti sono invitati a non modificare o alterare in alcun modo il dispositivo. Eventuali variazioni o modifiche non espressamente approvate da Belkin annulleranno la garanzia. Dichiarazioni FCC Questo dispositivo è conforme alla Parte 15 delle norme della FCC.
Dichiarazione CE Avviso importante: Nel caso di questo dispositivo, si tratta di un auricolare FHSS Bluetooth da 2,4GHz, destinato ad essere utilizzato negli uffici e nelle abitazioni in tutti i paesi membri dell’UE e dell’EFTA. I marchi commerciali Bluetooth sono di proprietà della Bluetooth SIG, Inc. USA e sono utilizzati da Belkin su concessione di licenza.
Introduzione Complimenti per aver scelto di acquistare un auricolare Bluetooth Belkin. Questo auricolare Bluetooth è piuttosto leggero, pesa infatti appena 10 grammi circa. È adatto ai profili di funzionamento in viva voce e come auricolare ed è compatibile con numerosi telefoni cellulari predisposti all’impiego della tecnologia wireless Bluetooth. Prima di iniziare ad utilizzare l’auricolare Bluetooth Belkin vi invitiamo a leggere attentamente le istruzioni per l’uso.
Tecnologia wireless Bluetooth La tecnologia Bluetooth ambisce a rivoluzionare il mercato dei dispositivi di connessione d’uso personale offrendo la possibilità di rinunciare ai collegamenti cablati. È realizzata specificamente per le soluzioni radio small form factor a basso costo ed offre la possibilità di impostare i collegamenti tra computer portatili, telefoni cellulari ed altri dispositivi portatili e palmari e Internet.
Caratteristiche dell’auricolare 1. Pulsante di risposta: Per accendere/spegnere l’auricolare, rispondere/terminare una chiamata, abbinare un auricolare ad un dispositivo ed utilizzare la funzione di composizione vocale. 2. Pulsante Volume Su: per alzare il volume dell’altoparlante. 3. Pulsante Volume Giù: per abbassare il volume dell’altoparlante. 4. Indicatore LED: visualizza lo stato dell’auricolare. 5. Microfono: raccoglie i segnali audio esterni. 6.
Caricamento dell’auricolare L’auricolare dispone di una batteria ricaricabile. Prima di utilizzare l’auricolare per la prima volta è necessario caricare la batteria per circa 2 ore, raggiungendo in questo modo il livello di carica massimo. Una batteria completamente carica offre 7 ore di autonomia in conversazione ed 1 settimana di autonomia in standby. Quando la batteria è scarica, nel LED lampeggia la spia rossa.
Per caricare l’auricolare: 1. Collegare l’adattatore CA al caricabatteria da tavolo e collegare quest’ultimo alla rete di alimentazione. 2. Collocare l’auricolare nel caricabatteria da tavolo. 3. In fase di carica, la spia rossa del caricabatteria da tavolo si accende . 4. Quando la batteria è completamente carica, la spia luminosa diventa verde. 5. A questo punto è possibile estrarre l’auricolare dal caricabatteria da tavolo e scollegare quest’ultimo dall’adattatore CA.
Come indossare l’auricolare L’auricolare Bluetooth Belkin si può indossare sull’orecchio destro o sinistro. Il supporto è regolabile ed il design ruotabile di 90 gradi ne garantisce una presa salda e al tempo stesso comoda nell’orecchio. Per indossare l’auricolare, seguire le istruzioni indicate di seguito: 1. Appoggiare direttamente il supporto nel canale esterno dell’orecchio. 2. Regolare l’auricolare adattandolo all’orecchio. 3. Il microfono andrebbe posizionato verso la bocca.
Come indossare l’auricolare con la clip o il laccio Facile da indossare grazie alla clip o al laccio. Come indossare l’auricolare 1. Indossare l’auricolare con il supporto dietro l’orecchio. 2. Accertarsi che il microfono sia puntato verso la bocca.
Regolazione dell’aggancio per l’orecchio destro (microfono regolabile) Regolazione dell’aggancio per l’orecchio sinistro (microfono regolabile) It Come sostituire il cover I cover su misura Belkin si adattano al vostro umore e al vostro stile. Togliere il cover come mostrato nella figura e sostituirlo inserendo il proprio cover preferito.
Accensione/Spegnimento dell’auricolare Per accendere l’auricolare: 1. Premere il pulsante di risposta per 5 secondi fino a sentire un tono basso seguito da un tono alto. Nel LED lampeggia quattro volte una spia blu. 2. L’auricolare si attiva e passa in modalità standby. Nel LED l’indicatore blu continua a lampeggiare ogni 3 secondi. Per spegnere l’auricolare: 1. Premere il pulsante di risposta per 1 secondo fino a sentire un tono alto seguito da un tono basso.
Per iniziare l’abbinamento tra l’auricolare ed un telefono cellulare Bluetooth presente nelle vicinanze: 1. Spegnere l’auricolare. 2. Accertarsi che il telefono cellulare sia acceso. 3. Premere il pulsante di risposta per accendere l’auricolare e tenerlo premuto per 7 secondi fino a quando l’indicatore LED si alterna tra la spia blu e quella rossa. A questo punto l’auricolare è pronto per la procedura di abbinamento con il telefono cellulare. 4.
Utilizzo dell’auricolare Prima di utilizzare l’auricolare, accertarsi che l’auricolare (1) sia acceso e collegato ad un telefono cellulare Bluetooth abbinato; (2) che l’auricolare si trovi a 10 metri dal telefono e che la funzione Bluetooth del telefono (3) sia attiva (vedere le istruzioni per l’uso del telefono). NOTA: l’auricolare supporta i profili auricolare e viva voce. Alcuni telefoni cellulari non supportano tutte le funzioni elencate di seguito.
Rifiutare una chiamata Se arriva una chiamata alla quale non si desidera rispondere, premere il pulsante di risposta per 2 secondi per rifiutare la chiamata. Effettuare una chiamata La chiamata può essere fatta attraverso: Attivazione vocale Per utilizzare la funzione di attivazione vocale, il telefono cellulare deve supportare la funzione di composizione vocale. Per maggiori dettagli sulla funzione di composizione vocale, vedere le istruzioni per l’uso del telefono cellulare. 1.
Ricomporre l’ultimo numero Per ricomporre l’ultimo numero, premere il pulsante Volume Giù per 3 secondi. Controllo volume Nel corso di una chiamata, è possibile regolare il volume dell’altoparlante dell’auricolare. Per ogni livello maggiore o minore del volume viene riprodotto un segnale sonoro. Per alzare il volume, premere il pulsante Volume Su ripetutamente fino a raggiungere il livello desiderato.
Silenziamento e disattivazione silenziamento Per eliminare la suoneria dell’auricolare durante una chiamata, premere il pulsante Volume Su e il pulsante Volume Giù per 2 secondi fino a sentire 1 tono ripetutamente ogni 20 secondi. Quando viene attivata la funzione di silenziamento, l’interlocutore non vi sente, ma può sentire tutti i suoni generati dall’altro lato. Per disattivare il silenziamento, premere il pulsante Volume Su o Volume Giù una volta.
Indicatore LED dell’auricolare Stato LED blu Attiva 4 volte LED rosso Intervallo Osservazioni 4 volte Disattiva Modalità Abbinamento (Pairing) La spia blu e quella rossa lampeggiano alternandosi fino alla fine dell’abbinamento o alla scadenza dell’intervallo disponibile.
Toni audio Accensione Sequenza rapida di 2 toni, da bassi a alti Spegnimento Sequenza rapida di 2 toni, da alti a bassi Modalità Abbinamento (Pairing) 1 tono Chiamata in entrata Un tono ogni 2 secondi Muto 1 tono ogni 20 secondi Disattivazione silenziamento Tono singolo Livello batteria basso 5 toni rapidi ogni 20 secondi in standby It In particolare per i telefoni cellulari Nokia Tutti i suoni generati dal telefono cellulare vengono automaticamente trasferiti all’auricolare.
Specifiche Standard E’ conforme alle attuali specifiche Bluetooth v1.1 / v1.
Garanzia limitata Garanzia sul prodotto Belkin limitata ad un anno Belkin garantisce che, per il periodo di validità della garanzia, questo prodotto non presenterà difetti di materiale e lavorazione. Qualora venisse rilevato un difetto, Belkin provvederà, a propria discrezione, a riparare o sostituire il prodotto gratuitamente, a condizione che esso sia restituito entro il periodo di garanzia, con le spese di trasporto prepagate, al rivenditore Belkin autorizzato da cui è stato acquistato.
Bluetooth ™ HeadSet Belkin Ltd. Express Business Park, Shipton Way Rushden NN10 6GL, Regno Unito +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin GmbH Hanebergstrasse 2 80637 Monaco di Baviera, Germania +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin B.V.
Bluetooth™ HeadSet Belkin Ltd. Express Business Park, Shipton Way Rushden NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin GmbH Hanebergstrasse 2 80637 Munich, Germany +49 (0) 89 143405 0 +49 (0) 89 143405 100 fax Belkin B.V.