Bluetooth® Headset User Manual
USER MANUAL IN THE FOLLOWING LANGUAGES ENGLISH P3 SPANISH P17
Please read this User Manual carefully before you start using your headset. Contents Package Contents . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Passkey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Quick Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Charging the Battery . . . . . . . . . . . . .
Thank you for purchasing the INVISIO® B3 Wireless Headset. The INVISIO® B3 can communicate with a wide range of devices, such as mobile phones, PDAs and computers, using two audio profiles: Bluetooth® HEADSET and Bluetooth® HANDS-FREE. NOTE: Please check your device´s owner´s manual for information about supported Bluetooth® features and functions.
Quick Start Charging the Battery Connect the AC adapter’s mini USB plug to the headset and connect the adapter to a power source. Charge the headset for 8 hours before first use. A red light in the TALK button indicates charging. When charged, the light turns off. Note: Red blinking light is an indication of low battery. The headset needs to be charged.
Important safety instructions - Save these instructions DANGER – TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS. For connection to a supply not in the USA use an attachment plug adapter of the proper configuration for the power outlet. This power unit is intended to be correctly orientated in a vertical or floor mount position. Preparing the Soft Springs Soft Springs are made extra long and can be cut to fit your ear, using scissors or a hobby knife.
Wearing Your INVISIO® B3 Use your index finger to bend the soft spring and insert the headset into your ear. Place the soft spring in the upper bend of your ear. For best audio quality, place the headset and phone on the same side of your body. Note: Do not place the soft spring in your ear without the headset attached. Turning ON/OFF To turn on the headset, press the TALK button until the blue light flashes five times followed by two tones.
Pairing with a Bluetooth® Device The INVISIO® B3 can be paired with up to eight devices. If you try to pair the headset with more than eight devices, the first paired device used least recently will be deleted. To pair the headset with a device (in OFF state): 1. Hold down the TALK button until the red and blue lights flash repeatedly. Note: The headset is in pairing mode for 5 minutes. The first time the INVISIO® B3 is turned on it will automatically enter into pairing mode. 2.
press the TALK button. To hang up, press the TALK button again. To reject a call, hold down the TALK button for 1 second. Operation Adjusting the Volume Use the VOLUME UP and VOLUME DOWN buttons to adjust the volume. Each adjustment is followed by a tone. When the minimum or maximum level has been reached, a different beep can be heard. VOLUME UP VOLUME DOWN Note: The INVISIO® B3 saves the last used volume setting when turned off.
Note: Call waiting must be supported by your phone and service provider. Conference Call To connect the “on hold” call to the conference call, press and hold the VOLUME UP button for 1 second, or until the headset beeps. Note: Conference call must be supported by your phone and service provider. Transfer and End a Call To transfer the second call to the “on-hold” call as well as disconnect yourself from the conversation, press and hold the VOLUME DOWN button for 1 second, or until the headset beeps.
phone or from the mobile phone to the headset. Voice Dialing The INVISIO® B3 supports voice dialing. Refer to your phone’s owner’s manual to set up voice dialing. To use voice dialing, press the TALK button and then complete your phone’s voice-dial procedure. To cancel a voice dial, press the TALK button again. Note: Voice dialing must be supported by your phone in order to use this feature. Cautions Important safety information. Read this information before using your INVISIO® B3.
sponsible for compliance could void the user’s authority to operate the equipment. See 47 CFR See, 15.21. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec.15.19(3). Hospitals or health-care facilities may use equipment that is sensitive to external RF energy.
by, and recommendations of, Wireless Technology Research. • Do NOT carry the phone or Bluetooth® headset in your breast pocket. • Turn OFF the phone and headset immediately if you suspect interference. RF Emissions Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Consult your local INVISIO® B3 store or an experienced technician for help. If you cannot eliminate the interference, the FCC requires that you stop using your product. Changes or modifications not expressly approved by NEXTLINK A/S may cause interference and void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
the product is warranted for the remaining time of the original warranty period. This warranty does not cover defects due to: 1. Adjustments, modifications, disassembly or any alteration of the product done by personnel not authorized by NEXTLINK A/S. 2. Accidents, exposure to liquids and food, moisture, extreme high or low temperatures or environmental conditions, forces of nature etc. 3.
whatsoever, including but not limited to commercial losses, Force Majeure or special contracts/deals. Please check the user’s guide for information and regulations about electronic operation of the product. This warranty does not affect the consumer’s legal rights due to national legislation in force. If warranty service is needed, please contact your dealer for further information. All shipping costs for products covered by this warranty will be divided equally between manufacturer and sender.
Por favor lea cuidadosamente la Guía del usuario antes de comenzar a usar su auricular. Contenidos Contenidos del paquete . . . . . . . . . . . . . . . . . . . 18 Características . . . . . . . . . . . . . . . . . . . . . . . . 18 Código . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Comienzo rápido . . . . . . . . . . . . . . . . . . . . . . . 19 Cargar la batería . . . . . . . . . . . . . . . . . . . . . . .
Gracias por comprar el auricular inalámbrico INVISIO® B3. El INVISIO® B3 se puede comunicar con una amplia gama de dispositivos, tales como teléfonos móviles, palms y computadoras mediante el uso de dos características de audio: auriculares Bluetooth® HEADSET y manos libres Bluetooth® HANDS-FREE. NOTA: Por favor verifique su manual del usuario para información sobre las características y funciones de soporte del Bluetooth®. Contenidos del paquete.
emparejamiento. Cada dispositivo Bluetooth® utiliza un código de emparejamiento llamado PASSKEY. El PASSKEY para el INVISIO® B3 es: 0000 Comienzo rápido Cargar la batería Conecte el mini UBS del adaptador CA al auricular y conecte el adaptador a la fuente de alimentación. Cargue el auricular durante 8 horas antes de usarlo por primera vez. Una luz roja en el botón TALK indica que está cargando. Cuando esté cargado se apagará la luz. Nota: cuando la luz roja titila indica que la batería está baja.
Instrucciones de seguridad importantes. Guarde estas instrucciones PELIGRO – PARA REDUCIR EL RIESGO DE INCENDIO O DE DESCARGA ELÉCTRICA SIGA CUIDADOSAMENTE ESTAS INSTRUCCIONES. Esta unidad de potencia está diseñado para estar correctamente orientada en una posición vertical o montada sobre el piso. Preparar los Soft Springs Los “Soft springs” (resortes blandos) están hechos extra largos y pueden cortarse para calzar en el oído usando un cúter.
Usar el INVISIO® B3 Use su dedo índice para doblar el “soft spring” (resorte blando), e inserte el auricular en el oído. Coloque el soft spring en el doblez superior del oído. Para una mejor calidad de audio coloque el auricular y el teléfono del mismo lado del cuerpo. Nota: No coloque el soft spring en el oído sin tener sujeto el auricular. Encender/Apagar Para encender el auricular, presione el botón TALK hasta que la luz verde titile cinco veces seguido de dos tonos.
Emparejar con un dispositivo Bluetooth® El INVISIO® B3 puede emparejarse hasta con ocho dispositivos. Si usted intenta emparejar el auricular con más de ocho dispositivos se borrará el dispositivo que se haya usado menos recientemente. Para emparejar el auricular con un dispositivo (cuando está apagado (OFF)): 1. Mantenga presionado el botón TALK hasta que las luces roja y verde titilen repetidamente. Nota: El auricular permanece en modo de emparejamiento durante 5 minutos.
Responder llamadas/Colgar/Rechazar una llamada El auricular emite un sonido de alerta para las llamadas que entran. Para responder a la llamada presione el botón TALK. Para colgar, presione el botón TALK nuevamente. Para rechazar una llamada, mantenga presionado el botón TALK durante 1 segundo. Nota: Los tonos del audio pueden oírse solamente cuando se está usando el auricular.
Mute (Silencio) Para silenciar el micrófono del auricular, presione los botones VOLUME UP y VOLUME DOWN al mismo tiempo durante tres segundos. Para desactivar la función “mute” presione ambos botones nuevamente alrededor de tres segundos. Cuando la función “mute” está activada, el auricular emite dos pitidos cada dos segundos. Nota: Los tonos del audio pueden oírse solamente cuando se está usando el auricular. Llamada en espera Para responder un segundo llamado, presione el botón TALK durante 1 segundo.
Transferir y finalizar una llamada Para transferir la segunda llamada a llamada “en espera” y al mismo tiempo desconectarse usted mismo de la conversación, presione y mantenga el botón VOLUME DOWN (bajar volumen) durante 1 segundo o hasta que el auricular emita un pitido. Nota: el servicio debe tener el soporte de su teléfono y proveedor de servicios.
Advertencia Información de seguridad importante. Lea esta información antes de usar el INVISIO® B3. • No exponga el INVISIO® B3 a la luz solar directa o temperaturas extremadamente altas o bajas durante períodos de tiempo prolongados. • No exponga el INVISIO® B3 a llamas abiertas, líquido o humedad, etc. • No tire, golpee, arroje o trate de doblar el INVISIO® B3. El trato brusco podría dañarlo. • Tragar el auricular podría ser fatal, manténgalo alejado de los niños.
Informações sobre emissões de RF Este equipamento foi testado e está em conformidade com os limites para um dispositivo digital de Classe B, de acordo com a Parte 15 das Normas da FCC. Esses limites foram desenvolvidos para fornecer uma proteção razoável contra interferência prejudicial em uma instalação residencial.
vadas pela NEXTLINK A/S podem causar interferência e anular a autoridade do usuário em operar o equipamento. Este dispositivo está em conformidade com a Parte 15 das Normas da FCC. A operação está sujeita às duas condições a seguir: (1) Este dispositivo não pode causar interferência prejudicial e (2) Este dispositivo deve aceitar qualquer interferência recebida, incluindo interferências que possam provocar operação indesejada.
Esta garantía no cubre defectos causados por: 1. Ajustes, modificaciones, desmontaje o cualquier alteración del producto realizado por personal no autorizado por NEXTLINK A/S. 2. Accidentes, exposición a líquidos y comida, humedad, temperaturas extremadamente altas o bajas o condiciones ambientales, fuerzas de la naturaleza, etc. 3.
el manual del usuario para información y normas sobre el funcionamiento electrónico de este producto. Esta garantía no afecta los derechos legales del consumidor según la legislación nacional en vigencia. Si necesita el servicio de garantía, por favor póngase en contacto con su vendedor para más información. Todos los costos de envío de los productos cubiertos por esta garantía serán divididos equitativamente entre el fabricante y la persona que lo envía.
© 2007 NEXTLINK A/S. All rights reserved. Bluetooth is a registered trademark of Bluetooth SIG Inc., and is used under license by NEXTLINK A/S. The Soft Spring system is a patent of NEXTLINK A/S. Check with local authorities regarding the use of headset while driving. Designed in Denmark, manufactured in Thailand. 07-2007-1.0 www.invisioheadsets.