G Wireless Modem Router User Manual PM01218ea-B F5D7634-4 v2 English Français Deutsch Nederl ands Español Italiano
Table of Contents Table of Contents sections 1 2 3 4 1 Introduction ���������������������������������������������������������������������������������������� 1 6 7 8 9 10 ��������������������������������������������������������������������������������������������������������������� 34 Wireless Range Extension and Bridging ���������������������������������������������� 40 Firewall �������������������������������������������������������������������������������������������������� 42 Utilities ���
Introduction Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Thank you for purchasing the Belkin G Wireless Modem Router (the Router). In minutes you will be able to share your Internet connection and network your computers with your new Router. The following is a list of features that make your Router an ideal solution for your home or small office network.
Introduction Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Product Features Compatibility with both PCs and Mac® Computers Integrated 10/100 4-Port Switch The Router supports a variety of networking environments including Mac OS® 8.x, 9.x, X v10.x, AppleTalk® , Linux® , Windows® 95, 98SE, Me, NT® , 2000, XP, Vista® , and others. You need an Internet browser and a network adapter that supports TCP/IP (the standard language of the Internet).
Introduction Table of Contents sections 1 2 3 4 5 6 7 8 9 10 NAT IP Address Sharing Universal Plug-and-Play (UPnP) Compatibility Your Router employs Network Address Translation (NAT) to share the single IP address assigned to you by your Internet Service Provider while saving the cost of adding additional IP addresses to your Internet service account.
Introduction Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Benefits of a Home Network Advantages of a Wireless Network By following our simple setup instructions, you will be able to use your Belkin home network to: Mobility – you’ll no longer need a dedicated “computer room”—now you can work on a networked laptop or desktop computer anywhere within your wireless range • Share one high-speed Internet connection with all the computers in your home • Share resources, such as files, and ha
Make Sure You Have the Following Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Package Contents System Requirements • G Wireless Modem Router • • Quick Installation Guide An active ADSL service with a telephone wall jack for connecting the Router • RJ11 Telephone Cord – Gray • • RJ45 Ethernet Networking Cable – Yellow At least one computer with a Network Interface Card (NIC) and Internet browser installed and correctly configured • ADSL Micro Filter* • • Power Adapter TCP/IP
Make Sure You Have the Following Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Internet Connection Settings The Setup Assistant contains a database of Internet Service Providers (ISPs) in each country to help you set up your Router quickly.
Knowing your Router Table of Contents sections 1 2 3 4 5 6 Knowing your Router The Router has been designed to be placed on a desktop. All of the cables exit from the rear of the Router for better organization and utility. The Network Status Display is easily visible on the FRONT of the Router to provide you with information about network activity and status. See the Network Status Display Guide for more detailed information.
Knowing your Router Table of Contents sections 1 2 3 4 A. Security 5 6 7 8 9 10 C. Wired-Computer Status OFF Wireless security is OFF OFF Wired computer is not present Solid Green Wireless security is ON Solid Green Wired computer is connected to the Router Flashing Green WPS sync is in progress Blinking Amber Problem with wired computer connecting to the Router B. Wireless-Computer Status D.
Knowing your Router Table of Contents E. ADSL Line Status sections 1 2 3 4 This icon lights in green to indicate that your modem is connected properly to the Router. It turns amber when problem is detected.
Knowing your Router Table of Contents sections 1 2 3 4 G. Connection to ADSL – Gray This port is for connection to your ADSL. Connect your ADSL to this port. An RJ11 telephone cord is provided in the package. 5 6 7 J. Power Jack – Black Connect the included 12V/. 1A DC power supply to this jack. H. Connections to Wired Computers – Yellow K. WPS Push Button Connect your wired (non-wireless) computers to these ports.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setup Assistant Belkin has provided Setup Assistant software to make installing your Router a simple and easy task. You can use it to get your Router up and running in minutes. The Setup Assistant requires that your Windows 2000, XP, or Vista computer be connected directly to your ADSL and that the Internet connection is active and working at the time of installation.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 1.1 Brand-New Setup Follow these steps if you are not replacing an existing modem. If you are replacing an existing modem, skip to the next section, “Replacing an Existing Modem or Modem Router”. 1. Retrieve the yellow RJ45 cable that was included with your Router. First, connect one end to any yellow port labeled “to Wired Computers” on the back of your Router.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 1.2 Replacing an Existing Modem or Modem Router Unpack your new Router from the box and place it next to your computer. Raise the Router’s antennas. G Wireless Modem Router 8 9 10 1 3 Follow these steps if you currently have a modem or a modem router that you will be replacing with your new Router. 1. 7 4 ADSL 2 LAN 3 2. Locate the cable that connects your old modem to your computer.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Step 2: Set Up the Router – Run the Setup Assistant Software 1. Shut down any programs that are running on your computer at this time. Turn off any firewall or Internet-connection-sharing software on your computer. 3. Insert the CD into your computer. The Setup Assistant will automatically appear on your computer’s screen within 15 seconds. Click on “Go” to run the Setup Assistant.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 2.1 Select Country 2.2 Confirmation Screen Select your country from the drop-down box. Click “Begin” to continue. Verify that you have completed all QIG steps by checking the box to the right of the arrow. Click “Next” to continue. Note to US model owner: To comply with US FCC regulation, the country selection function has been completely removed from all US models.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 2.3 Progress Screen 2.4 Checking Settings Setup Assistant will show you a progress screen each time a step in the setup has been completed. The Setup Assistant will now examine your computer’s network settings and gather information needed to complete the Router’s connection to the Internet.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 2.5 Verifying Hardware Connections 2.6 Naming your Wireless Network The Setup Assistant will now verify your hardware connection. The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapters will connect.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 2.7 Requesting Internet Account Info (if needed) 2.8 Configuring the Router If your Internet account requires a login and password, you will be prompted with a screen similar to the illustration below. Select your country or ISP from the drop-down boxes. The Setup Assistant will now configure your Router by sending data to the Router and restarting it. Wait for the on-screen instructions.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 2.9 Checking Internet Connection We are almost done. The Setup Assistant will now check your connection to the Internet.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Congratulations Troubleshooting You have finished installing your new Belkin Router. You will see the Congratulations screen when your Router can connect to the Internet. You can begin surfing by opening your browser and going to any website. If the Setup Assistant is not able to connect to the Internet, you will see the following screen.
Connecting and Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 2.10 Optional: Assistance Connecting Other Computers Once you have verified that your other wired and wireless computers are properly connected, your network is set up and working. You can now surf the Internet. Click “Next” to take you back to the main menu. This optional step will help you to connect additional wired and wireless computers to your network. Follow the on-screen instructions.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Understanding the Web-Based User Interface The home page shows you a quick view of the Router’s status and settings. All advanced setup pages can be reached from this page. (2) (3) (4) Using Web-Based Manager Once your host PC is properly configured, start your web browser and type the private IP address of the Router into the URL field: “192.168.2.1” and then click “Enter”.
Manually Configuring your Router Table of Contents 1. sections 1 2 3 4 Quick-Navigation Links Home Button 5. 8 9 10 Internet Status Indicator This indicator is visible in all pages of the Router, showing the connection status of the Router. When the indicator says “connection OK” in GREEN, the Router is connected to the Internet. When the Router is not connected to the Internet, the indicator will read “no connection” in RED.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 6. LAN Settings 9. Version Info Shows you the settings of the Local Area Network (LAN) side of the Router. Changes can be made to the settings by clicking the “LAN” “Quick Navigation” link on the left side of the screen. Shows the firmware version, boot-code version, hardware version, and serial number of the Router. 10. Page Name 7. Features The page you are on can be identified by this name.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 Changing LAN Settings All settings for the internal LAN setup of the Router can be viewed and changed here. LAN Settings Clicking on the header of the LAN tab (A) will take you to the LAN tab’s header page. A quick description of the functions can be found here. To view the settings or make changes to any of the LAN settings, click on “LAN Settings” (B) or to view the list of connected computers, click on “DHCP Client List” (C).
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 IP Address IP Pool The “IP address” is the internal IP address of the Router. The default IP address is “192.168.2.1”. To access the advanced setup interface, type this IP address into the address bar of your browser. This address can be changed if needed. To change the IP address, type in the new IP address and click “Apply Changes”. The IP address you choose should be a non-routable IP.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 DHCP Client List You can view a list of the computers, which are connected to your network. You are able to view the IP address of the computer, the host name (name of the computer in your network), and the MAC address of the computer’s network interface card (NIC). Pressing the “Refresh” button will update the list. If there have been any changes, the list will be updated.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setting your ISP Connection Type to PPPoE or PPPoA PPPoE (Point-to-Point Protocol over Ethernet) is the standard method of connecting networked devices. It requires a user name and password to access the network of your ISP for connecting to the Internet. PPPoA (PPP over A™ ) is similar to PPPoE, but is mostly implemented in the UK. Select PPPoE or PPPoA and click “Next”.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setting your Connection Type to Dynamic IP (1483 Bridged) Setting your ISP Connection Type to Static IP (IPoA) This connection method bridges your network and ISP’s network together. The Router will obtain an IP address automatically from your ISP’s DHCP server. This connection type is also called “Classical IP over A™ ” or “CLIP”, which your ISP provides a fixed IP for your Router to connect to the Internet. 1.
Manually Configuring your Router Table of Contents sections 1 2 3 4 Setting your Connection Type to Modem Only (Disable Internet Sharing) 5 6 7 8 9 10 DNS (Domain Name Server) Settings A “Domain Name Server” is a server located on the Internet that translates Universal Resource Links (URLs) like “www.belkin.com” to IP addresses. Many ISPs do not require you to enter this information into the Router.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Using DDNS (Dynamic DNS) Setting up the Router’s Dynamic DNS Update Client The DDNS service allows you to alias a dynamic IP address to a static host name in any of the many domains DynDNS.org offers, allowing your network computers to be more easily accessed from various locations on the Internet. DynDNS.org provides this service, for up to five host names, free to the Internet community. TZO.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Wireless The “Wireless” tab lets you make changes to the wireless network settings. From this tab, you can make changes to the wireless network name (SSID), operating channel, and encryption security settings. Channel and SSID 1. Changing the Wireless Network Name (SSID) 2. To identify your wireless network, a name called the SSID (Service Set Identifier) is used.
Manually Configuring your Router Table of Contents 3. sections 1 2 3 4 4. Using the Wireless Mode Switch 6 7 8 9 10 Changing the Wireless Channel There are a number of operating channels from which to choose. In the United States, there are 11 channels. In the United Kingdom and most of Europe, there are 13 channels. In a small number of other countries, there are other channel requirements. Your Router is configured to operate on the proper channels in which the country you reside.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Encryption/Security Securing your Wi-Fi Network Here are a few different ways you can maximize the security of your wireless network and protect your data from prying eyes and ears. This section is intended for the home, home-office, and small-office user. At the time of this User Manual’s publication, there are four encryption methods available.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Wired Equivalent Privacy (WEP) WEP is a common protocol that adds security to all wireless products that are compliant with Wi-Fi. WEP was designed to give wireless networks the equivalent level of privacy protection as a comparable wired network.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Wi-Fi Protected Access (WPA) WPA2 WPA is a new Wi-Fi standard that was designed to improve upon the security features of WEP. To use WPA security, the drivers and software of your wireless equipment must be upgraded to support WPA. These updates will be found on the wireless vendors’ websites. There are two types of WPA security: WPA-PSK (no server) and WPA (with 802.1x radius server).
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Sharing the Same Network Keys For a Windows XP computer that does not have Service Pack 2 (SP2), a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access (KB 826942)” is available for free download at http:// www.microsoft.com/downloads/details.aspx?displaylang=en&familyid=0 09D8425-CE2B-47A4-ABEC-274845DC9E91. Most Wi-Fi products ship with security turned off.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 WEP Setup Changing the Wireless Security Settings 1. Select “WEP” from the drop-down menu. 2. Select “WEP Mode” of 64-bit or 128-bit. 3. After selecting your WEP mode, you can enter your key by typing in the hex key manually. Your Router is equipped with WPA/WPA2, the latest wireless security standard. It also supports the legacy security standard, WEP. By default, wireless security is disabled.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 WPA Setup Setting WPA/WPA2-PSK (no server) Note: To use WPA security, all your clients must be upgraded to drivers and software that support it. At the time of this User Manual’s publication, a security patch download is available free from Microsoft. This patch works only with the Windows XP operating system.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Wireless Range Extension and Bridging What is a Wireless Bridge? PLEASE BE SURE TO FOLLOW THE STEPS BELOW CAREFULLY. A wireless bridge is actually an operation “mode” you can use to extend the range of your wireless network, or add an extension of your network in another area of your office or home without running cables. 1. Set your access point to the same channel as the Router.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6. You will see the Router’s user interface in the browser window. Click “Wireless Bridge” (2) on the left-hand side of the screen. You will see the following screen. 7. Check the box that says, “Enable ONLY specific Access Points to connect” (1). 8. In the field named “AP1” (3), type in the MAC address of your secondary access point. When you have typed in the address, click “Apply Changes”. (1) Bridging is now set up.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Firewall Virtual Servers Your Router is equipped with a firewall that will protect your network from a wide array of common hacker attacks including: • IP Spoofing • Land Attack • Ping of Death (PoD) • Denial of Service (DoS) • IP with zero length • Smurf Attack • TCP Null Scan • SYN flood • UDP flooding • Tear Drop Attack • ICMP defect • RIP defect • Fragment flooding Virtual servers allo
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Choosing an Application Manually Entering Settings into the Virtual Server Select your application from the drop-down list. Click “Add”. The settings will be transferred to the next available space in the screen. Click “Apply Changes” to save the setting for that application. To remove an application, select the number of the row that you want to remove, then click “Clear”.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Client IP Filters Access Control The Router can be configured to restrict access to the Internet, email, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. Access control allows users to define the outgoing traffic permitted or denied access through the WAN interface. The default is to permit all outgoing traffic.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 URL Blocking Schedule Rule To configure the URL-blocking feature, specify the websites (www. somesite.com) and or keywords you want to filter on your network. Click “Apply Changes” to activate the change. To complete this configuration, you will need to create or modify an access rule in the “Client IP filters” section. To modify an existing rule, click the “Edit” option next to the rule you want to modify.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Setting MAC-Address Filtering The MAC-address filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter the MAC address of each client (computer) on your network to allow network access to each.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 DMZ (Demilitarized Zone) Blocking an ICMP Ping If you have a client PC that cannot run an Internet application properly from behind the firewall, you can open the client up to unrestricted 2-way Internet access. This may be necessary if the NAT feature is causing problems with an application such as a game or videoconferencing application. Use this feature on a temporary basis.
Manually Configuring your Router Table of Contents sections 1 2 3 4 5 6 7 8 9 10 Utilities The “Utilities” screen lets you manage different parameters of the Router and perform certain administrative functions. Restart Router Restore Factory Defaults At times it may be necessary to restart or reboot the Router if it begins working improperly. Restarting or rebooting the Router will NOT delete any of your configuration settings.
