User Manual

Page 1 - 2
7 Port USB Hub User’s Manual
Introduction
This product confirms to USB Specification Rev. 1.1 and HID class definition
Rev.1.0.The HUB topology supports up to 127 physical devices in a tired-star
configuration.
Features
!
Confirms to USB Specification Revision 1.1 and HID Class Definition Rev.1.0.
!
Plug and play compatible.
!
A maximum of 127 devices can be supported.
!
A maximum 5 meter connection cable can be used between two hubs.
!
Powered by self-powered or Bus powered.
!
All downstream ports are supported with over current protection.
!
Both low speed and high speed devices are supported.
!
LED displays indicate power on and connection to each port.
System Requirement
!
IBM PC Compatible
!
Supports Windows 95 OSR 2.1, 98, 98 SE and 2000 Professional
Installation
!
When connecting this unit for the first time a message box will display :
Searching for unknown hardware device, searching software for installation”
!
Your computer will then start up the Device Driver Wizard, and will install the
unit. This product is recognized as “generic USB Hub”
!
Once your computer has confirmed installation, you can then connect any USB
devices you wish to the Hub.
Packing List
!
USB HUB
!
Power
!
USB Cable (1.8m , Connector Type-A to Connector Type-B)
!
This manual
Specification

Summary of content (2 pages)