Belgacom Twist™ 675 User manual
INTRODUCTION Dear customer: Thank you for purchasing a DECT telephone; we appreciate your trust in us. This product was manufactured with the utmost care, should you encounter any difficulties during its use, we recommend that you refer to this user guide. For your comfort and safety, we ask that you read the following paragraph carefully: Recommendations and safety instructions Your DECT telephone must not be installed in a humid room (wash room, bathroom, laundry room, kitchen, etc.) unless it is 1.
Belgacom TwistTM 675 services at the touch of a key Take a second call and switch between calls by pressing R and 2. ▼ Call Waiting Signal a service package by subscription Manage your line with utmost simplicity. Forward your calls to another number. by subscription This pack combines the advantages of all the services on your line. ▼ ▼ Call Forwarding Smart Services Benefit Pack Display the number of the last call you missed.
Easy SMS :-) Send your SMS messages: Plug in your Twist™ 675. Compose your text message and send it to the addressee’s fixed-line number or national mobile number (of participating operators). And you’re ready to go! Receive your SMS messages: The SMS function is automatically activated when you send your first SMS message. Want to find out more? • www.belgacom.
CONTENTS Your telephone Unpacking Your base Your handset Connecting the base Handset set-up Turning the handset on and off Replacing the batteries Installation of a chart SIM Getting started Installation guide Making a call Belgacom smart services Services when not in communication Receiving a call During a call Handsfree Transfer or call from another handset During communication Accessing the phonebook or call log Recording a conversation Secret mode Ending a call Entering a number in the phonebook Commun
CONTENTS Defining the call time limit Defining forbidden prefixes - Call barring Creating, modifying or deleting a forbidden prefix Authorising three-way calling Settings Accessing the Settings menu Programming a key Modifying the date and time Adjusting the contrast Using the auto hang up and pick up features Installation guide Modifying the country code Modifying the language Advanced settings/ Handset settings Registering a new handset to a base Modifying the base preference Resetting the handset Perso
YOUR TELEPHONE Unpacking Place the box in front of you, open it and make sure it contains the following items: • one base, • one handset, • one battery compartment cover, • one equipped power adapter, • one telephone line cord, • three rechargeable batteries, • this user guide. Your base It fits well into your family and professional environment.
YOUR TELEPHONE Your handset With its user-friendly design, you will appreciate how easy it is to hold and its quality during conversations.
YOUR TELEPHONE The visual display of your handset Status icons Battery indicator Network indicator Silent mode on Alarm clock on Record mode SMS Reception Timer on Answering mode Message répondeur non lu In use Name of the base and handset (press OK) Icon showing the programmed function Icon of operator Services Silent mode Operateur Services Timer Agenda Alarm clock Keypad lock Number Redial Enabling answering machine Answering machine Phonemail Other icons Accessories Organiser B
YOUR TELEPHONE Connecting the base Before making any connections, please refer to the safety instructions presented at the beginning of this user guide. Place the base where it should be located. Plug the telephone line connector (as shown in the illustration) into the telephone socket on the underside of the base and connect the other end to the telephone wall socket.
YOUR TELEPHONE Turning the handset on and off To turn the handset off, hold down the red key briefly on the screen. Your handset is now off. and the message "Goodbye" is displayed To turn your handset back on, hold down the green key screen. . BELGACOM is displayed on the Information is displayed on the screen, including the name and number of the handset (for instance HANDSET -2 -), the date and the time.
YOUR TELEPHONE Installation of a chart SIM Take your base, remove the compartment of chart SIM (reference mark 2) located on the right side . Take your chart SIM (reference mark 3) and make slide it in the compartment by taking account of the direction of insertion (printed circuit of the visible chart and notch on the right). 1 2 Insert the compartment unit and chart SIM in the housing located on the basis (reference mark 1) .
GETTING STARTED GETTING STARTED Installation guide Once the handset has been turned on, press OK and select your language. Set up assistance is automatically provided. It helps you set certain parameters for your telephone. The parameters are: • language. • date and time, • Answering machine, • name of the handset, • external ringer, If you wish to change the language, you can do this by the following procedure on page 79. Making a call Enter the number of your contact using the keypad keys.
GETTING STARTED They can be accessed when you are not in communication (ring back if busy, etc.) or during communication (three party conversation, call transfer, etc.). Services when not in communication When not in communication, press key or from the Services menu select using or the function that you want to activate from those found in the following list and press Confirm . 1919 - Know the last call that entered and was not answered, with possibility of direct dialling of this number.
GETTING STARTED Fw. Busy Off (#67#) - Deactivation of forward call in case of line busy function. 2 Call On (*43#) - Activation of 2 Call signal. 2 Call Off (#43#) - Deactivation of 2 Call signal. Fixed Ca On (*53*) - Activation of fixed call function: enter an emergency number of your choice, then press . Fixed Ca Off (#53#) - Deactivation of fixed call function. Ring back Off (#37#) - Deactivate the Belgacom Ring Back service. Anon.
GETTING STARTED After each service activation or deactivation, wait for the confirmation tone (quick intermittent tone), then hang up by pressing the key. Using a password is not possible. Receiving a call When you receive a call your telephone rings. If you have subscribed to a "Caller display" service, the caller's information appears on the screen (unless your caller has enabled the anonymous mode), otherwise the "Caller unknown" screen is displayed.
GETTING STARTED When pressing the green key while engaged in a conversation you automatically activate the handsfree mode of the handset, by pressing it again you deactivate the handsfree mode. The message Handsfree on appears on the screen. Increase or decrease the audio volume using or . Transfer or call from another handset This function is only accessible when two handsets or more are registered to the same base. During communication, you can transfer the call to another handset.
GETTING STARTED Receiving a second call whilst on line. During the call, you will hear a beep to tell you that there is a second call waiting. A screen will show the second caller's details. Press Accept to take this new call. Your other caller is then put on hold and you can talk with your second caller. Making a second call whilst on line. During communication, you can put your contact on hold and call a second one by pressing Menu . Select Make 2nd Call using or .
GETTING STARTED To end one of the calls and continue the other one Press Menu . Select Hanging up using or . Press Activate . The call in progress is definitely terminated, and you can then take the second call. To set up a conference (the two parties and yourself) Three-way calling is only possible when the second call is made from your telephone. Press Menu . Select 3-party conf. using or . Press Activate . You can then talk to both parties simultaneously.
GETTING STARTED Accessing the phonebook or call log During communication, you can access your phonebook to look up a telephone number, a name contained in an entry or information on calls stored in your call log. During communication, press Menu . Using or , select Phonebook or Calls and press Confirm Return to the communication menu using . . Recording a conversation During communication, you can record an entire conversation or just a portion of it.
GETTING STARTED Return to the communication menu using . Secret mode You can switch to private mode at any time during your conversation. Your handset microphone will be switched off and the other person will not be able to hear you. To activate secret mode: During communication, press Menu . Using or , select Secret mode and press Activate . The Microphone muted message will appear on the screen and the flashing icon will be displayed on the communication screen.
GETTING STARTED Entering a number in the phonebook Dial the number you want to enter in the phonebook. If you make an error while entering the number, press C to delete the error. Press Store . The name input screen appears. Using the keypad keys, enter the name of your contact by pressing successively on the keypad keys (see page 22 for further details). Example "Smith": .
GETTING STARTED • To change the information in the entry, press Edit . You can now modify the name, number and/or icon type. • If the information is accurate, press Confirm . Your entry is created and is now in the phonebook list. You can see the beginning of your contact's name which is preceded by a number type icon. The various phonebook functionalities are described in the menu Your phonebook, page 22.
GETTING STARTED Press the SMS key, a screen appears with the Edit SMS option highlighted. Press Confirm . Use the , keys to select either Common box or a personal box if one has been created. The SMS will be sent to the box selected. If no personal box has been created, only the shared box is displayed on the screen. To create a personal box, select PersoBox Menu and press Confirm . Follow the instructions displayed on the screen.
GETTING STARTED Enter your recipient terminal number (default setting 0). press Confirm . A confirmation screen appears. It indicates the type of transmission and the number to which your message will be sent. • If the information is accurate. Press Confirm • appears on the screen indicating that the transmission of your SMS is in progress. To change the phone number or modify the text message press Edit . A message . A screen allows you to choose the items you want to modify.
MENU STRUCTURE Phonebook Sms Calls Accessories Games Personaliz. View New entry Edit Delete Search Transm. Lire carte SIM Edit SMS Read SMS Memory Empty SMS box Settings Incoming calls Outgoing calls Events SMS Centers Sub.
MENU STRUCTURE Security Keypad lock Emergency Change code Time limit Restriction Intrusion Confidentialité Settings Program keys Date/time Contrast Auto Hang up Auto Pick up Adv. Settings Help Country code Language HS Settings Base Settings Line Settings SMS Settings TAM Settings Ans. Mach Messages Outgoing msgs TAM Settings On/Off Operator Services 21 Call screening Remote Code Mess. Duration Priv. Access Record Mode No of rings Registration PreferredBase Reset HS Custom Handset name Registr.
YOUR PHONEBOOK YOUR PHONEBOOK You can store 200 phonebook entries in your phonebook. Each phonebook entry can contain the name of your contact which can be a maximum of 16 characters long (spaces included), your contact's telephone number up to 24 digits and an icon identifying the type of number (work, home, mobile...). You can associate a unique ring tone to each entry and thus create your own call groups. (To use this service, the Display number service must be active on your line).
YOUR PHONEBOOK The name input screen appears. Using the keypad keys, enter the name of your contact by pressing successively on the corresponding keys. To correct any mistakes made in entering the name, use: • the C key to clear a letter, • the , keys to move to a specific location in the name in order to add or delete a letter. Once you are done making your changes, press Confirm . The number input screen appears. Now, enter the name of your contact using the keypad keys.
YOUR PHONEBOOK Viewing the phonebook On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm (you can access the phonebook directly using the key). Select View. Press Confirm . Select the entry you want to view using or . Once you have selected it, press OK to confirm. You can call the number that is associated to the entry directly by pressing the green key .
YOUR PHONEBOOK Editing an entry On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm (you can access the phonebook directly using the key). Select Edit using or . Press Confirm . Select the entry with the keys , or by entering the first letter of the name of the entry then with the or keys. Press Edit . You enter the name input screen. The cursor is at the end of the name. • The information is accurate. Press Confirm .
YOUR PHONEBOOK To exit the menu, press the red key . Deleting an entry On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm (you can access the phonebook directly using the key). Select Delete using or . Press Confirm . Select the entry with the keys , or by entering the first letter of the name of the entry then with the or keys. Press Delete . A confirmation screen asks you if you wish to delete the entry.
YOUR PHONEBOOK First method: Access your phonebook list, press successively on the keypad key which corresponds to the first letter of the name you are searching for so as to make it appear at the top of the screen. Once the first letter of the name is displayed, wait a moment. The phonebook selects the first name in the list that starts with the selected letter. Press or to select the specific entry that you wish to view or call, press OK to confirm.
YOUR PHONEBOOK On the base: Insert the SIM card into the space provided. Reportez-vous au paragaphe Installing a SIM card, page 8. On the handset: , press or until the Phonebook screen is On the navigator key displayed, press OK to confirm. Select Read SIM card using or . Press Confirm . Enter the PIN code for your SIM card. Press Confirm . If you incorrectly enter a code three times, you SIM card will be blocked. A screen will show the third and final attempt.
YOUR PHONEBOOK Transfer all or part of the phonebook Each of your handsets has a phonebook. However if you do not want to enter the same list of contacts several times, the transfer function in the phonebook menu allows you to easily transfer your phonebook from one handset to the next. Transfer by intercommunication On the navigator key , press or until the Phonebook screen is displayed, press OK to confirm. Select Transm. using or . Press Confirm . Select By Intercom with the keys or .
YOUR PHONEBOOK Depending on the type of transfer you selected, follow one of the procedures below: • To transfer the entire phonebook, wait a few seconds. Once the operation is done, a screen indicating the end of the transfer will appear. • To transfer a number, take the sending handset and do the following: - Select the number to be transferred using the or keys . - Press Transfer. • to send it to the receiving handset. Wait for the transfer to be made.
YOUR PHONEBOOK Select By IrDA with the keys or . Press Confirm . Select the number to be transferred using the or keys. Press Transfer. to send it to the receiving handset. Wait until the transfer is complete. You will then return to the numbers in the directory. Select another number using the or keys and press Transfer. . Repeat the operation until you have transferred all the numbers you want to transfer. To exit the menu, press the red key .
SMS SERVICE SMS SERVICE - MINI-MESSAGES You can use your DECT telephone to send, receive and track SMS messages (called mini-messages). You can send SMS messages either another fixed SMS-capable telephone or a mobile telephone (if your SMS operator enables it). If your Twist 675 is the only SMS appliance connected to your line, do not configure anything. If this is not the case, refer to paragraph SMS settings, page 42.
SMS SERVICE Enter the code of the box, if you have selected a personal box. Press Confirm . A text input screen appears. Using the keypad keys, enter the text message by pressing successively on the corresponding keys. The capital letters are accessible by long press on . Alphanumeric keypad key correspondence depending on the actived mode (capital letters or small letters). ’, 1, #, ,, .
SMS SERVICE Capital letters/Small letters When writing your message, you can enter capital letters or small letters. You can switch between lowercase and uppercase character modes by holding down the key . When the uppercase mode is selected, the symbol top of the screen. is displayed at the Special characters During the writing process, certain special characters are accessible by doing the following.
SMS SERVICE Writing SMS with EATONI: Press the alphanumeric keypad key corresponding to the desired letter. A blinking letter appears. • If the letter corresponds to the desired letter, continue writing the SMS by pressing the keypad key corresponding to the next letter (or to insert a space or option to send the SMS). • If the letter does not correspond to the desired letter, press successively on to modify it until you get the desired letter.
SMS SERVICE • Enter the number using the keypad. Press Confirm . Enter your recipient terminal number (default setting 0). press Confirm . A confirmation screen appears. It indicates the type of transmission and the number to which your message will be sent. • • If the information is accurate. Press Confirm . A message appears on the screen indicating that the transmission of your SMS is in progress. To change the phone number or modify your text message, press Edit .
SMS SERVICE The transmitter personal box (page 44) selection menu only appears when at least one personal box is created. Press Yes to select a transmitter box. Select the transmitter box from the list that appears. Press Confirm . Once you are done, a screen displays your receiver's number. • To make a correction, press Edit and press Confirm • . Make the desired corrections . The information is accurate. Press Confirm .
SMS SERVICE Different options come up on the screen: - Save: to save your text in draft form. Once it is saved, you will be able to resolve the potential problems and send your message at a later time without having to enter it again. - Try again: to attempt a new delivery. - Delete SMS: to permanently delete your SMS. - See receiver: to check the phone number or send the SMS again. - Edit SMS: to change the delivery type and number or your text. Choose an action using or . Press Confirm .
SMS SERVICE If no personal box has been created, only the shared box is displayed on the screen. To create a personal box, select PersoBox Menu and press Confirm . Follow the instructions displayed on the screen. For further details, refer to the paragraph Creating a personal box, page 45. Enter the code of the box, if you have selected a personal box. Press Confirm . A list of the different folders appears. The number of messages contained in each folder is displayed in brackets.
SMS SERVICE - Delete - Transfer : to permanently delete this SMS. : to forward this message to a new recipient. You will be able to modify the original message. - Call : to call the SMS sender number. - No. to Phonebk : to save the SMS sender number in your phonebook. - Extract : to extract a number (at least 3 digits) present in the text from the SMS towards the repertory.
SMS SERVICE Use or to view all of the information. To exit the memory information screen, press Return . Emptying an SMS folder This function is used to delete all the messages contained in a folder. To delete the messages one by one refer to paragraph Managing read messages, page 39. When you empty an SMS folder, all messages linked to a personal box will not be erased. , press or until the SMS screen is On the navigator key displayed, confirm using OK. Select Empty SMS Box using or .
SMS SETTINGS SMS SETTINGS You can access the SMS settings menu via the SMS menu or the Adv. Settings submenu in the Settings menu. Modifying the SMS centre number This function is for changing the numbers of the SMS centers. You can define up to four SMS center numbers for reception and one for transmission. By default, the number of the SMS sending centre (1717 for Belgacom) is programmed to center SMS 2 and the number of the SMS reception centre (01717 for Belgacom) to center SMS 1.
SMS SETTINGS Then define which SMS center will be used for transmission. Choose the SMS transmission center Select SMS send center the using or keys. Press Confirm • To change the SMS transmission center, press Edit . Select the SMS center wanted using the or keys and press Confirm • . . To keep the current SMS center, press Confirm To exit the menu, press the red key . .
SMS SETTINGS If your contact forgets to include the terminal number, the SMS message will be sent to terminal 0 by default. If you do not assign a different number to each SMS-type device connected on the same line, you will not be able to receive SMS. , press or until the SMS screen is On the navigator key displayed, press OK to confirm. Select Settings. Press Confirm . Select Sub-Address using or . Press Confirm . An information screen shows the current number of the telephone SMS terminal.
SMS SETTINGS Sub-Addressing You have 10 sub-addresses (9 personal and 1 collective) assigned to your telephone line (telephone number). You can assign each one of these subaddresses: • to a terminal (the SMS for this sub-address arrive in the DECT base collective box) • or to a personal box (the SMS received for this sub-address arrive in the private pass-word protected SMS box) The sub-address is a number that must be added at the end of your telephone number (11th digit) by those who wish to send you SMS.
SMS SETTINGS Select Private box. Press Confirm . Select New using or . Press Confirm Enter the box name. Press Confirm . . If you enter a name that already exists, a message tells you that the name already exists. The box name can have no more than 10 characters. Enter the code associated to the box. Press Confirm . The user code must contain 4 digits. Enter the code associated to the box again. Press Confirm . The telephone provides you with a terminal number associated to the box.
SMS SETTINGS Viewing a message from a personal box , press or until the SMS screen is On the navigator key displayed, press OK to confirm. Select Read SMS. Press Confirm . Select the personal box. Press Confirm Enter the personal box code. Press Confirm . Select the folder New or Inbox using or . Press Confirm Select the message using or . Press Confirm . . The message is displayed on the screen.
SMS SETTINGS If an SMS is sent to a personal box not listed on your telephone (or if this box was removed), the SMS will not be delivered. If you delete a personal box, you must confirm it at the end of the procedure by entering the basic code. All the messages it contains are erased.
CALL LOG CALL LOG This menu enables you to view the call or event lists of your telephone. The dialed call log presents the calls you made. The received call log presents the calls you received. The event log groups together all the new events that took place in your absence: • reception of an SMS, • calls received during your absence, • new messages on the answering machine.
CALL LOG To exit the menu, press the red key . Calling the last number dialed (Redial) Your telephone has a shortcut key that can be used to automatically redial the last number dialed. From the idle screen, press and hold the green key screen appears. Release green key until the Call log , the last dialed number appears. Press the again. The number is dialed automatically. You can view the other dialed calls by pressing or on the navigator key .
CALL LOG Viewing the events log If one or more new events occurred during your absence, the information screen "NEW EVENTS View?" appears. • If you do not wish to view the event log at this time, press No • To view the event log, press Yes . . Once the event log has been viewed, the information screen disappears. You can however view it again via the "Calls" menu and the calls missed in the submenu "Incoming calls". A summary screen appears.
CALL LOG Select Activate or Deactivat using or . Press Confirm . If the "Deactivat" option is confirmed, you can consult new elements. To do this: Select View using or . Press Confirm . Choose the event using or . Press Confirm The event appears on the screen. 52 .
ACCESSORIES ACCESSORIES This menu offers you numerous additional functionalities: • Alarm clock: to use your handset as an alarm clock. • Organiser: the handset will ring at the set date and time to remind you of an appointment. • Birthday: the handset will ring at the set date and time. • Timer: to remind you of an event (maximum 99 minutes). • Monitoring : use a handset to monitor a room.
ACCESSORIES Alarm clock The alarm function enables you to activate the handset ringer every day at a set time. When the alarm is triggered the selected ring tone sounds for 60 seconds through the handset speaker and an alert screen is displayed. To turn off the alarm press or key. Setting the alarm clock On the navigator key , press or until the Accessories screen is displayed, press OK to confirm. Select Alarm clock using or . Press Confirm .
ACCESSORIES The alarm settings information screen appears showing the new status. Press Confirm . Modifying the alarm clock time Select Set Time in the list using or . Press Confirm . Enter the time at which you would like the alarm clock to sound. Press Confirm . The information screen displays the new setting. Press Confirm . Once the time has been set, the alarm is automatically activated.
ACCESSORIES Press or to increase or decrease the volume. Once the volume is set, press Confirm . The alarm clock settings information screen appears. Press Confirm To exit the menu, press the red key . . Timer The timer function activates the handset ringer at a programmed time. You can view the programmed time on the screen. Once the specified time has elapsed, the handset rings for 60 seconds and the alarm screen is activated. Turn off the alarm by pressing Stop handset stops ringing. .
ACCESSORIES Changing the programmed time of the timer. In the timer options, select Set Time in the list. Press Confirm Enter the desired time. Press Confirm . . The timer activation screen appears with the modification. Press the OK key to start the timer. Changing the timer ring tone In the timer options, select Ring Tone using keys or . Press Confirm . The list of ring tones appears, the handset plays the ring tone. Select the ring tone using keys or .
ACCESSORIES A screen appears indicating whether or not the lapsed time of the timer is visible. Press Edit to change the current status. Press Confirm . The timer is displayed. Press OK to launch it. To exit the menu, press the red key . Birthday or organiser alarms You can programme birthday and organiser alarms (10 of each type) on your DECT telephone. Birthday and appointment reminders will be presented at the set time and day.
ACCESSORIES Enter the alarm activation time. Press Confirm . A confirmation screen appears. • To make a correction, press Edit . • To keep the informationpress Confirm . Viewing a birthday (or organiser) alarm Select Birthday (or Organiser) using or . Press Confirm . The list of programmed birthday alarms (or organiser alarms) is then displayed on the screen. In the birthday (organiser) alarm list screen, select the alarm you would like to view using or , and press OK to confirm.
ACCESSORIES The following options are available: - View: to view the alarm data. - Edit: to change the alarm name or date. - Delete: to remove a birthday or organiser alarm. - Ring tone: - New entry: to set the ring tone that will sound when the alarm goes off. to set up a new alarm. To exit the menu, press the red key . Monitoring a room You can use your handset to monitor a room. This allows you, for example, to monitor a baby's room. To do so, place one of the handsets in the room to be monitored.
ACCESSORIES • Place the sender handset in the room to be monitored. The handset in sender mode does not ring to notify you of incoming calls. It can therefore be placed in a room where someone is sleeping. • Keep the receiver handset with you. When in monitor mode, the receiver handset can be used to make calls. To make a call: press Call and dial the number. To answer a call, press the green key . At the end of the call, the handset will automatically return in monitor mode.
GAMES GAMES There are 2 games on your handset - Taquin and Fruit Mind. Taquin This is a solitaire-type game, with three levels of difficulty (9, 16 or 25 elements). The aim is to replace identical objects as seen. The goal is to arrange the objects in the way indicated in the objectives. On the navigator key , press or until the Games screen is displayed, press OK to confirm Select Taquin using or . Press Confirm . Press or to select the game. Press Confirm Press Goal pressing Return .
GAMES Key Action move the piece located under the empty square upward move the piece located above the empty square downward OK move the piece located to the left of the empty square to the right C move the piece located to the right of the empty square to the left To exit the games, press the red key . Fruit Mind Fruit Mind is a thinking game, in which you have to work out the random sequence made up of four fruits.
GAMES The new game screen will appear. Use the keys and indicators below to play.
CUSTOMIZING THE HANDSET CUSTOMIZING THE HANDSET This menu allows you to modify the ring tones and the visual interface of the handset, and particularly: • to assign different ring tones for incoming calls outsides or intercom (between handsets), • to change the idle screen picture, • to change the menu background color, • to activate or deactivate power-saver mode, • o activate or deactivate tones being sounded when pressing the keypad or when validating the settings informationof your handset.
CUSTOMIZING THE HANDSET Adjust the ringer volume using ou , press Confirm To exit the menu, press the red key . . Modify the idle screen This menu allows is for changing the your handset idle screen picture. On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm. Select Scrn bckgrnd using or . Press Confirm . Select from among the images presented using the or keys. Press View . The image is displayed on the screen.
CUSTOMIZING THE HANDSET Modify the color of the menu backgrounds This menu is for changing the menu background color. On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm. Select Ambiance using or . Press Confirm . Select the desired color using the ou keys, the colors are displayed on the screen as they are reviewed for selection. Press Confirm To exit the menu, press the red key . .
CUSTOMIZING THE HANDSET Activate or deactivate the Eco mode On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm. Select Eco mode using or . Press Confirm . The status is displayed on the screen. Press Edit to activate or deactivate the power saver mode. The status is changed immediately, Press Confirm To exit the menu, press the red key . . Activating or deactivating the beeps On the navigator key , press or until the Personaliz.
CUSTOMIZING THE HANDSET • To keep the status, press Confirm screen. Press Confirm . The status is modified on the . To exit the menu, press the red key . Activating/deactivating the silent mode When in silent mode, the telephone ringer and keypad beeps are inhibited. On the navigator key , press or until the Personaliz. screen is displayed, press OK to confirm. Select Silence using or . Press Confirm .
CUSTOMIZING THE HANDSET Select Record using or . Press Confirm The "Record tone" is displayed. Press Record . . Record your text or an audio sequence of up to 8 seconds. Press End to stop the recording before reaching the maximum time. The recording is played, and the message "Do you want to keep the ring tone?" is displayed on the screen. Press Yes to keep the recording. The validated ring tone is placed directly in the submenu "Ring tones" under the name "User Ring".
IRDA IRDA This menu lets you switch your handset to IrDA reception mode, so that you can receive files in V-card format from another D85 handset or any other compatible device. , press or until the IrDA screen is On the navigator key displayed, confirm using OK. An IrDA reception mode activation screen will appear. press Yes . When the IrDA reception mode is activated on your handset, use the emitter device to transfer the data.
SECURITY SECURITY This menu enables you to change or customise the security parameters of your telephone. You can: • lock the keypad, • programme an emergency number, • modify the base code, • define the call time limit, • define forbidden prefixes, • authorise or deny communication to a number of handsets, Locking/unlocking the keypad To lock / unlock the keypad, hold down on a key for a few seconds, and then confirm by pressing the key Yes You can also lock your keypad via the Security menu.
SECURITY Programming an emergency number This function allows you to define an emergency number which can be enabled or disabled. Once it is activated, the emergency number will be automatically dialed when the green key • is pressed from the idle screen. Once activated, you can however call a different number with predialing by dialing a number and pressing . The following types of numbers should not be programmed: Fire, emergency and police rescue services...
SECURITY • You can pick a number from the phonebook. Press selection using or and Confirm Press Confirm , make your . The number is displayed. . To exit the menu, press the red key . The emergency number is automatically activated. The name of the handset displayed on the idle screen becomes EMERGENCY. Modifying the base code The base code (0000 being the default setting) is required to access certain security functions. It must be composed of 4 digits.
SECURITY Defining the call time limit You can set your telephone's operating time. Once the call time limit is used up, it is no longer possible to make calls. To be able to call again, you will have to deactivate the call time limit or set a new limit. If the time limit ends during a telephone conversation, communication will not be cut off. Once you have hung up, it will not be possible to make a new call, emergency number included..
SECURITY Once the modifications have been made, the information screen shows the new call time limit. • To modify the setting, press Edit • To keep the setting, press Confirm To exit the menu, press the red key . . . Defining forbidden prefixes - Call barring You can prohibit the use of certain prefixes on your telephone. When a prefix is forbidden, it will be impossible to call numbers which start with these prefixes. Depending on the programmed prefixes, certain numbers will no longer be accessible.
SECURITY Select the desired option using or . Press Confirm . Creating, modifying or deleting a forbidden prefix Access the selection screen for the Edit prefix option (see above). Select Edit Prefix using or . Press Confirm . A screen showing the forbidden prefixes appears. You can programme up to 5 forbidden prefixes. Select an empty location (dashes) or a prefix to modify using or . Press Confirm . The prefix input screen appears. Enter the prefix using the keypad.
SECURITY Select Intrusion using or . Press Confirm A screen displays the current status (on or off). • To change the status, press Edit • To keep the status, press Confirm To exit the menu, press the red key 78 . . . .
SETTINGS SETTINGS This menu enables you to change or customise the handset and base parameters. Accessing the Settings menu , press or until the Settings screen is On the navigator key displayed, press OK to confirm. Using the following flowchart, select the setting you would like to modify or view. Use or to select an option and the Confirm key to enter the menu or access the desired function. Confidentialité Settings Program keys Date/time Contrast Auto Hang up Auto Pick up Adv.
SETTINGS Select Program keys. using or . Press Confirm A screen presents the function currently assigned the • To keep the function, press Confirm • To modify the function, press Edit . key. . . The graphic corresponds to programmable key . The graphic corresponds to programmable key . Choose from the function list the function you want to assign to the key.
SETTINGS To exit the menu, press the red key . You can go from programming the key to programming the key by pressing or on the navigator key. Modifying the date and time The base manages the time displayed on the handset, so the time indicated on your handset should be re-verified after any loss of electric power. If the time is not set correctly, proceed as indicated above to set the time. On the navigator key , press or until the Settings screen is displayed, press OK to confirm.
SETTINGS Adjusting the contrast On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Contrast using or . Press Confirm . A list presenting five contrast levels appears. Select the desired level using or . The contrast is directly visible on the screen. Press Confirm . Adjust the contrast until you have obtained a satisfactory level. To exit the menu, press the red key .
SETTINGS A screen displays the current status (on or off). • To change the status, press Edit • To keep the status, press Confirm screen, press Confirm . . The status is modified on the . To exit the menu, press the red key . Installation guide You can call up the installation help guide. This will enable you to reset: • date and time, • name of the handset, • Answering machine, • external ringer. On the navigator key , press or until the Settings screen is displayed, press OK to confirm.
SETTINGS An information screen will display the current country code. • To keep the status, press Confirm • To change the status, press Edit . . Using the or keys, move the cursor to the place where you want to change the number. Press C to delete the number in front of the cursor. Re-enter the new number and press Confirm . The screen will display the new programmed country code. Press Confirm . To exit the menu, press the red key .
SETTINGS To exit the menu, press the red key . ADVANCED SETTINGS/ HANDSET SETTINGS Registering a new handset to a base To register a new handset to a base you must: • put the handset in registration mode, • put the base in registration mode. Once this is done, the registration (mutual recognition of the base and the new handset) will be done automatically (registration can take a few seconds).
SETTINGS The new handset and the base are mutually searching for each other. The registration may take several seconds. Once the handset is registered, the handset automatically exits the registration mode et lets you know the registration is done. You can also set your base to the registration mode using a handset already registered by selecting the Registration function in the menu Settings/Adv.
SETTINGS Once the preferred base is selected, press Confirm To exit the menu, press the red key . . Resetting the handset When you reinitialise your handset, all the parameters are reset to their initial value (factory settings) with the exception of the phonebook, alarms (birthdays and organiser) and SMS parameters. When resetting the handset, the security functions (forbidden prefixes and time limit duration) are not set back to their initial value.
SETTINGS On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings using or . Press Confirm . Select HS Settings using or . Press Confirm Select Custom using or . Press Confirm Select the required base number. Press Confirm . . . Delete the current base name using C key (if necessary). Enter the new name, press Confirm . Enter the base code. Press Confirm .
SETTINGS On the base: Put the base to which you want to register the handset in registration mode: • For the Twist 655, press on the button on the base for • a few seconds. For other base stations, refer to their user guides. The green light blinks rapidly, the base is in registration mode. The new handset and the base are mutually searching for each other. The registration may take several seconds.
SETTINGS To exit the menu, press the red key . ADVANCED SETTINGS/ BASE SETTINGS Using a handset to put the base in registration mode This function enables you to put the base in registration mode so you can register a new handset. Refer to paragraph Registering a new handset to a base, page 85 On a handset that is already registered the base in question, press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings using or . Press Confirm .
SETTINGS Re-initialising the base When you re-initialise your base, all the base parameters are reset to their initial values (factory settings). On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings using or . Press Confirm . Select Base Settings using or . Press Confirm . Select Reset Base using or . Press Confirm .
SETTINGS Select Adv. Settings using or . Press Confirm . Select Base Settings using or . Press Confirm . Select Delete Handset using or . Press Confirm . Select the handset you wish to unregister in the list by pressing or . Press Confirm . A screen prompts you to confirm the unregistration. Press Yes to unregister the handset. The deleted handset must be registered to its base again.
SETTINGS Select the base for which you want to modify the name. Press Confirm . Use the C button to make corrections and re-enter the new name using the keypad. Press Confirm . To exit the menu, press the red key . ADVANCES SETTINGS / LINE SETTINGS Before changing the settings of the telephone line, contact your operator to obtain the parameters for your line.
SETTINGS A screen presents the current status (public or private). • To keep the status, press Confirm • To change the status, press Edit screen, press Confirm . . The status is modified on the . To exit the menu, press the red key . Modifying the dialing mode If you telephone is connected to an old PABX, you might have to change the number system. The default dialing mode is tone. On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv.
SETTINGS Modifying the flash duration (R key) If you connect your telephone to a private automatic branch exchange or use it in a foreign country, you may need to modify the flash duration in order to use your telephone correctly with regard to the following functionalities: outgoing 2nd call, incoming 2nd call, conference call. Contact your administrator, who will supply the appropriate time period, and proceed to the new settings. The value for Belgacom is 120 ms.
SETTINGS Setting a PABX prefix If a private automatic branch exchange is used, you can programme the external call prefix. With this function you can set the: • PABX prefix number, • dialed number length at which point the PABX will be automatically dialed (this length is called "digit before prefix") • prefix status (on or off). On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings. Press Confirm . Select Line Settings. Press Confirm .
SETTINGS To exit the menu, press the red key . To enter the pause mode during dialling, press the 0 key until syboml "/" appears. 2nd call This function allows you to activate or deactivate the outgoing 2nd call option during communication. You can only activate this, if you subscribe to the "COMFORT" and "Number display" services. On the navigator key , press or until the Settings screen is displayed, press OK to confirm. Select Adv. Settings. Press Confirm . Select Line Settings.
ANSWERING MACHINE ANSWERING MACHINE Your telephone's answering machine comes with two answering modes: - Answer only: callers cannot leave you a message and an OGM informs them of your unavailability. - Answer and record: an OGM invites your callers to leave messages. The telephone answering machine models also offer the following functionalities: - Anonymous mode with pre-recorded OGMs. - Call screening. - Remote message retrieval.
ANSWERING MACHINE The OGM that will be used is played. At the end of the playback, confirm the new status of the answering machine by pressing Confirm . If you have not recorded a personal OGM, the answering machine will automatically use the pre-recorded OGM. You can turn your answering machine on or off using the base buttons. Press on the button until the base indicator light changes colour. The last mode used and its OGM are activated.
ANSWERING MACHINE To stop recording press End . Your outgoing message is automatically played back. At the end of the playback, a confirmation screen asks you if you want to keep this new outgoing message. Press Yes No to keep your OGM or to record it again. Using a pre-recorded anonymous OGM If you select the anonymous mode, your personal outgoing message will be definitely replaced by the pre-recorded outgoing message.
ANSWERING MACHINE On the navigator key , press or until the Ans. Mach screen is displayed. Press OK to confirm. Select Outgoing msgs. Press Confirm . Select Delete all using or . Press Confirm Press Yes . to delete all the personal outgoing messages. Playing messages When there are messages on your answering machine, the base indicator light blinks. The rhythm of the flash informs you as to the number of messages received (ex.
ANSWERING MACHINE • Go back to the beginning of the message: • Return to the previous message: • Pause playback: • Start playback after pause: • Delete the message being played back: long press on twice The answering machine will automatically stop at the end of the last message. Playing messages using the handset On the navigator key , press or until the Ans. Mach screen is displayed. Press OK to confirm. Select Messages using or . Press Confirm Select Play using or .
ANSWERING MACHINE To remotely access your answering machine: Dial your telephone number and wait for the answering machine to come on. When your outgoing message is played, press # and enter your remote access code. The remote access code is 0000 by default. However, it can only be used once it is customised, refer to paragraph Modifying the remote access code, page 105. A beep will indicate access to the answer machine. Any unread messages will be automatically played back.
ANSWERING MACHINE Recording a memo This function enables you to leave a personal message on your answering machine. Until the time it is played, it will be considered like a new message by the answering machine. On the navigator key , press or until the Ans. Mach screen is displayed. Press OK to confirm. Select Messages. Press Confirm . Select Record memo using or . Press Confirm . Press OK to start recording.
TAM SETTING TAM SETTING This menu enables you to modify the advanced settings of your answering machine (depending on the model) You can access the TAM setting menu through the Ans. Mach. menu or through the Adv. Settings submenu of the Settings menu. Activating and deactivating call screening When activated, the call screening function enables you to listen to the message left by your caller as it is being recorded. You can pick up at any time. On the navigator key , press or until the Ans.
TAM SETTING Press Yes to modify the remote access code. Enter your Base code (default setting is 0000). Press Confirm . Enter the new remote access code (4 digits mandatory). Press Confirm . To exit the menu, press the red key . Setting the message duration This duration corresponds to the recording time that the caller will have to leave you his message. On the navigator key , press or until the Ans. Mach menu is displayed, press OK to confirm. Select TAM Settings. Press Confirm .
TAM SETTING Select the desired duration using or . Press Confirm To exit the menu, press the red key . . Privileged access This service enables you to switch off the handset ringer for all incoming calls when you do not want to be disturbed, except for privileged calls. During the reception of a call, the answering machine will switch on after a certain number of (muted) rings that you will have set and the caller will be able to leave you a message.
TAM SETTING Press Yes to activate the privileged access mode. To exit the menu, press the red key . Record mode The record mode enables you to modify the recording time capacity of the answering machine. Two quality levels are available: • Superior quality: for a 15 minute high-quality capacity. • Standard quality: for a 25 minute normal-quality capacity. Modifying the message recording quality does not affect the quality of the outgoing message. On the navigator key , press or until the Ans.
TAM SETTING If there are no new messages on the answering machine, the number of rings will be 4, otherwise the number of rings will be 2. On the navigator key , press or until the Ans. Mach menu is displayed, press OK to confirm. Select TAM Settings. Press Confirm . Select No. of rings using or . Press Confirm . The programmed number of rings is displayed on the screen. Press Edit to modify the current number.
APPENDIX Care and Maintenance Use a slightly damp cloth to wipe the base and handset, do not use a dry cloth as this may cause electrostatic charges. Problems Refer to the table presented below in case of an operational malfunction: Problems Remedies The base indicator light is not lit Make sure that : • the power adapter is properly connected to a power socket. • the power connector is properly plugged into the base.
FEATURES Functions Default settings SMS Functions Default settings Beeps SMS sending centre 1717 SMS reception centre 01717 All active SETTINGS ACCESSORIES Program keys Silence/Oper.
GUARANTEE Guarantee terms The Equipment you have bought has been carefully selected by Belgacom and is covered by a two-year warranty on spare parts and labor in the event of any material or manufacturing defect, unless otherwise specified. The warranty shall be valid from the date on which the equipment is collected or delivered.
ENVIRONMENTAL INFORMATION • The equipment that you bought has required the extraction and use of natural resources for its production. It may content hazardous substances for the health and the environment. • In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle most of the materials of your end life equipment in a sound way.
DECLARATION OF CONFORMITY Déclaration de conformité Konformitätserklärung We, Wij, The Manufacturer /Le Constructeur / De fabrikant E 27, rue Leblanc – F-75512 PARIS CEDEX 15 - FRANCE Address / Adresse / Adres declare under our sole responsability that the product Déclarons sous notre seule responsabilité que le produit erklärt in eigener Verantwortung, daß das Produkt Verklaren op onze verantworodelijkheid dat het product Product designation Model & Variant Product Type Designation Identification : Dec
