3 Complied By: Jerry Lee Div. or Dept.: R & D Dept.
3 TABLE OF CONTENTS 1. FUNCTIONAL SUMMARY _________________________________________________3 1.1. Scope -----------------------------------------------------------------------------------------------------------------------------3 1.2. Features --------------------------------------------------------------------------------------------------------------------------3 1.3. Unit as Received---------------------------------------------------------------------------------------------------------------3 1.4.
1. 1.1. SCOPE 1.2. FEATURES: This specification defines the product features and requirements of the 2.4GHz Digtal Spread Spectrum Technology (DSST) features. 40 channels 2.4 GHz Basic Cordless telephone. ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ ⇒ 1.3. FUNCTIONAL SUMMARY 2.
3 1.3.4. Printed Materials: 1.3.5. Packaging: 1.4. APPEARANCE 1.5. DATE CODING 1.5.1. Location 1.5.2. Format 1.5.3. Encoding 1.6. LABELING: 1.6.1. Base Unit: 1.6.2. Handset 1.6.3. Other Marking and Labeling: 1.6.3.1.AC-DC Adapter Marking The following information must appear on the AC-DC Adapter: BELCO INTERNATIONL CLASS 2 POWER SUPPLY MODEL NO.
3 1.6.4. Country Of Origin 1.6.4.1. Acceptable Phrase 1.6.4.2. AC-DC Adapter Country of Origin 1.7. STANDARDS & REFERENCES: FCC and UL Rules and Regulations are mandatory. Other documents are reference. 1.7.1. EIA 470B Telecommunications - Telephone Terminal Equipment - Performance and Compatibility Requirements for Telephone Sets with Loop Signalling. 1.7.2. FCC Rules and Regulations 1.7.2.1.47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 1.7.2.2.
3 1.8.2. ETL / cETL Approval and Listing The unit shall be designed and manufactured so that it may be operated in accordance with UL60950-1. 1.8.3. Industry Canada Approval (IC) The unit shall be designed and manufactured so that it may be operated in accordance with the latest revision of the Industry Canada regulations. 1.9. SAFETY The unit must meet all specifications as set forth in Bellsouth Safety Practices Manual. The unit must meet any and all applicable UL standards, including UL60950-1.
3 1.11. COMPATIBILITY 1.11.1. Operation With Other Devices 1.11.2. Operation With Central Offices This product shall be capable of operating with any FCC/UL approved Central Office without causing any harm to the Central Office. 1.12. SECURITY CODE INFORMATION We provide a fixed code that is continuously varied among 1,048,576 discrete digital codes as each telephone is manufactured. Written By: Belco International Co., Ltd.
3 2. 2.1. USER INTERFACE DESCRIPTION INITIAL FACTORY SETTINGS: Tone / Pulse Switching: Volume Control: Talk Button: All LEDs” 2.2. DEFAULT SETTINGS 2.3. RINGING AND TONES: Tone Nominal ( FCC HAC compatible) OFF OFF 2.3.1. Warning tone: Low Battery Indicator: The handset shall provide an audible and visual alert when its battery charge will soon be inadequate to continue conversation Beat Time (ms) ON Time (ms) OFF Beep Frequency (Khz) Out of Range Indicator: 1 80 4000 2.
3 2.3.2.2 Handset unit When the base incoming call will be flash LED and heard beep tone on handset. 2.3.2.3. Page ring: This ring will alert the other party to page H/S from B/U for 15seconds. The page function will operate the ringer of H/S only. This ring shall be distinctive from incoming call ring.
3 2.4 DISPLAY: 2.4.2 LED: The following illumination cadences shall indicate that… Off Indicate that no action is in progress. On (Solid) Indicate that a steady action in progress. Slow Blink Warning for temporary stop action or for some change in progress. a. Low battery:(For the handset) Blink Time (ms) ON Time (ms) OFF 1 500 1500 2 b. Page: (For the base & handset) Blink Time (ms) ON Time (ms) OFF 1 250 250 2 250 250 C. Out-of range Blink Time (ms) ON Time (ms) OFF 1 80 2000 d.
3 2.4.4 LEDs on Base unit: Name Talk LED Charge/ Page LED Description LED off if the phone is “on-hook”. LED on if the phone is “off-hook”. Distinctive and power ring cadence blinking during incoming call ringing. LED fast blinking if Page is pressed (hold mode) LED off if the handset is out of the cradle. LED on if the handset is on the cradle. LED slow blinking if Page is pressed (on-hook mode) LED slow blinking if Page is pressed (off-hook mode) 2.5 TEST MODE: 2.
3 OFF HOOK- Shall initiate a hook switch flash in TALK mode. ON HOOK- Ring pattern select ion: press Flesh key and 1or ,2,3,4 in on-hook mode 600mS +/- 10% 4 Flash 5 0 to 9 digit keys Pressing TALK key, these buttons can be used for manual dialing. Each key action will be followed by tone feedback 6 TONE, * Shall dial or store the ‘*’, in TALK mode respectively. Shall initiate temporary tone dialing if pulse dial mode is set.
3 2.6.2 Base unit: # 1 Function Page User Interface Note Press PAGE key to page the B/S. Ring the H/S for 15 second. Paging will be terminated by pressing PAGE button on the base again. Pressing the “talk“key on the hand set will establish RF link. If handset is off hook, softer ring on handset will alert paging from Base unit. 2 T/P Switch 3 Talk LED 4 Charge/ Page LED Set Tone or Pulse dialing depending on the position of the switch. Mechanical 2 position switch.
3 3 ELECTRICAL SPECIFICATIONS (More detail the specifications refer to attached – refer A) 3.3 TEST CONDITIONS Unless otherwise noted, all tests are performed under the following conditions: 3.4 3.3.2.1 Power Supply Voltage: 120Vac ±10% for the base 60Hz. 3.7Vdc ±0.025Vdc for the handset. 3.3.2.2 Ambient Temperature: 3.3.2.3 Standard measurement as described in EIA standard, and 470B. 3.3.2.
3 3.4.2.9 Transmitted Power 3.4.2.9.1 Peak Power Channel Peak Power level (dBm) No Ch Frequency(GHz) High Medium Low 1 2.4048 16 +/- 2 5 +/- 2 -6.5 +/- 2 20 2.4408 39 2.4750 Note: Peak power readings using the HP8990A Peak power analyzer 3.4.2.9.2 Normal TX Power(High mode) : 14 +/- 3dBm (spectrum analyzer) 3.4.2.10 Radiated emission : see FCC 15.249 for limits 3.4.2.11 Audio distortion : < 5% 3.4.2.12 Audio freq response : 300Hz ± 3dB 3KHz ± 30dB 3.4.2.13 AM Hum noise & Noise : < 35dB 3.4.2.
3 3.5 LINE INTERFACE: The set shall meet all items in the Belco. The following items will be tested during the evaluation. 3.5.2 Battery Requirements 3.5.2.1 The batteries must supply 2.0 hours (above) of continuous talk time at low power operation or more than 14 days of stand-by service when fully charged. 3.5.2.2 The unit must be fully charged within 3.5 hours at 120 Vac from the fully discharged condition.
3 3.5.7 Tone Ringer (Base unit only) The ringer shall be of the tone type, meeting the following specifications. Component Parameter Min Output level at ringer Output level at 0.5 meter 68 Max 110 Units dB SPL dB SPL 3.5.8 Ring Sensitivity: Shall meet the para. 8.3.2 and 8.3.3. 3.5.9 On-Hook DC and AC impedance: Shall meet the para. 8.3.4 and 8.3.5. 3.5.10 OFF- hook Impedance: Shall meet the para. 8.3.6. 3.5.
3 4 ENVIRONMENTAL This product shall comply with BELCO General Specifications and Procedures for Telephone Products, with the following exceptions and additions: 4.3 PURPOSE OF SPECIFICATION 4.4 TEMPERATURE PERFORMANCE To assure product can still meet customer expectations after and during exposure to expected environmental use conditions. 4.4.2 Operating Range Base unit and Handset: 0°C to +50°C 4.4.3 FCC Performance (Reference Para 15.
3 FCC REGULATIONS Warning : Modifying or tampering with the telephone’s internal components can cause a malfunction and might invalidate the telephone’s warranty and void your FCC authorization to operate it. If the trouble is harming the telephone lines, the telephone company might ask you to disconnect the telephone until you have resolved the problem.
3 FCC REGULATIONS CONTINUED INTERFERENCE INFORMATION: PART15 OF FCC RULES Some telephone equipment generates and uses radio frequency energy which if not properly installed, may cause interference to radio and television reception. This unit has been tested and found to comply with the limits for class B computing device in accordance with the specifications in Part 15 of the FCC rules.
3 IC REGULATIONS Notice : This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.
3 AVIS D’INDUSTRIE CANADA Avis : L’étiquette d’Industrie Canada identifie le matériel homologué. Cette homologation signifie que l’équipement est conforme à certaines exigences de protection, de fonctionnement et de sécurité du réseau de communication qui apparaissent dans les documents appropriés traitant des exigencies techniques des équipements de terminaison. Industrie Canada n’atteste pas que I’équipement donnera satisfaction à l’usager.
3 IMPORTANT SAFETY INSTRUCTIONS When using this product, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners, or aerosol cleaners.
3 CONSIGNES DE SÉCURITÉ IMPORTANTES Pour réduire les risques de blessure, d’incendie et d’électrocution, chaque fois que vous utilisez ce produit, appliquez les règles élémentaires de sécurité, notamment les suivantes : 1. Lisez attentivement toutes les instructions. 2. Respectez tous les avertissements et toutes les instructions apparaissant sur le produit. 3. Avant de nettotyer ce produit, débranchez le prise murale. N’utilisez pas de nettoyant liquide ni en aérosol.
BELCO INTERNATIONAL CO., LTD. 212, YEOKGOK-DONG, WONMI-KU, BUCHEON CITY, KYUNGKI-DO, KOREA TEL: 82-32-349-1903 FAX: 82-32-349-1907 E-MAIL : diana@belco.co.kr Security code information We provide a fixed code that is continuously varied among 1,048,576 discrete digital codes as each telephone is manufactured.