User's Guide and Operating Information S500 Dual Mono Audio Amplifier Bel Canto Design, LTD. 221 1st Street North Minneapolis, MN 55401 Phone: (612) 317.4550 Fax: (612) 359.9358 www.belcantodesign.com Info@belcantodesign.
The Bel Canto Design e.One Series is a perfect example of what can be accomplished when elegant engineering and depth of empirical knowledge are combined. All components are selected for high sound quality, precision, technical performance, and material quality. Bel Canto’s circuit designs and component quality will provide superb performance and years of listening satisfaction. S500 Dual Mono Audio Amplifier Power Amplifiers TA B L E O F C O N T E N T S Bel Canto Design Statement . . . . . . . . . . .
Get Closer Bel Canto Design audio products are designed to bring you closer to the power and beauty of your music. Our goal is simply to provide the most expressive and powerful musical experience outside of the live event and bring some of the greatest musicians and their performances into the intimacy of your home. We design equipment which is easy to own, use and live with.
Design Features The e.One S500 amplifier is a dual-mono audio power amplifier that delivers over 400 watts into 4 ohm loads. Each amplifier contains its own dedicated regulated power supply for all amplifier stages, including the output section. This is achieved in a compact and elegant product through our adaptation of the latest analog switching amplifier and power supply technology from the ICEpower group.
Unpacking Unpacking The S500 Amplifier box contains: 1 – User's Guide 1 - Power Cable for connection to utility power [1.85m, 6' long] 1 – S500 Amplifier. 1 - Owner's Warranty / Registration Sheet Carefully inspect your new unit and check for shipping damage. If there is any damage, or if any piece is missing, please contact your dealer, distributor or Bel Canto Design. Save all packing materials as the packing is specially designed to protect the amplifier for shipping or transporting it.
S500 Amplifier Rear Panel Connections S500 Amplifier Rear Panel Never Connect Either the Positive or Negative Speaker Output to Any Ground Contact! Connecting any Speaker Output on the S500 to Ground will cause the amplifier to go into protection and could damage the amplifier and void the warranty. 1) Power Switch: Power is on when the switch is toggled to the I position and off in the O position.
What to do if there is hum or ground noise: 1) Check that the RCA/XLR switch is in the correct position for the type of connection being used. 2) Insure that the preamplifier or any source components are not producing hum by setting the preamplifier to a MUTE or Standby setting.
Specifications S50 0 Power Amplifier Maximum Power Output/Channel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .500W 4 ohms, 250W 8 ohms Power Output 1% THD/Channel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .370W 4 ohms, 200W 8 ohms Minimum Load: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ohms Frequency Response: .
Bel Canto Design, LTD. 221 1st Street North Minneapolis, MN 55401 Phone: (612) 317.4550 Fax: (612) 359.9358 www.belcantodesign.com Info@belcantodesign.com ©2008 Bel Canto Design, LTD e.
