CE-02H-UG-EN-001 User Guide on installation of TPCAST Wireless Adaptor for Oculus 1
CONTENTS 1 1 Installation of Software Client 2 What's in the box? 3 Instructions of main components 4 Connection instructions 5 Operation instructions 6 Instructions on setup of PC transmitter 7 Safety and note 8 Frequently asked questions
TPCAST Wireless Adaptor for Oculus and portable power bank will get warm in the normal usage, if the partial temperature reached 120 F, please stop using, in order to avoid burning people or other hazards. Because there is no cable effect, you should pay attention to the safety of game area during using TPCAST Wireless Adaptor for Oculus, to ensure that will not touch to the surrounding objects, or take the experience under the care of others. Please read the user guide prior to operating of the product.
1. CLIENT SOFTWARE INSTALLATION 1. Download the software client Visit the website of TPCAST which is www.tpcastvr.com and log in, browse the page of TPCAST wireless adaptor for Oculus, click to download the connection assistant for Oculus. The current version of client is compatible with Windows 7, Windows 8 or later version, Windows 10. w w w. t p c a s t v r. c o m / s u p p o r t - o c u l u s Click here to download TPCAST wireless adapter installation software version 2.
6 7 8 A1 A2 B1 B2 9 14 ① ② ③ ④ ⑤ ⑥ ⑦ 10 HMD receiver PC transmitter Power box Portable Power bank of 20100mAh Dedicated cable for long distance connection HDMI cable Instructions and warranty card 1. HMD receiver 12 13 15 3.
3 1 2 ① ② ③ ④ ⑤ 4 5 HMD strap and cable port HDMI short connection port Indicator for video signal connection USB port Video link pairing button 2. PC transmitter 1 ① ② ③ ④ ⑤ 2 3 5 4 HDMI connection port DCIN power port Video link pairing button Port for fixing the platform Indicator for video signal connection 3.
① ② ③ ④ DCIN power port for dedicated long distance connection cable USB port for dedicated long distance connection cable Battery connector, USB port Indicator light 4. Portable power bank 1 ① ② ③ ④ 4 2 3 USB power output port Micro USB charging port Battery indicator button Battery indicator 5.
6. Cable Dedicated cable for long distance connection A1 A2 B1 B2 7. HDMI cable 4. CONNECTION INSTRUCTIONS 1. PC transmitter connection instructions Step one: Screw the support rod onto the chassis, and then screw the PC transmitter onto the support rod. 1 Step two: Plug the PC transmitter power adaptor DC plug into the DCIN interface.
HDMI port. Step three: Adjust the location and angle of the PC transmitter to face the gaming area. 2.Connecting the HMD receiver Step one: Referring to the angles shown in the illustration, remove the helmet's foam bracket, unplug the cables, and take out from the head strap. Step two: As shown in the illustration, thread the HMD strap through the tail end of the helmet's receiver and out from the front end marked with the letters "TPCAST". Then, pass it through the helmet's wire hole and secure it.
Step four: Straighten out the cable and reattach the foam bracket. Adjust the strap length to fit the user and ensure the cable connections are secure. 3. Power box connection instructions Step one: As shown in the figure, insert connectors B1 and B2 of the dedicated long connection cable into the power supply and HDMI ports on the power box respectively. Step two: As shown in the figure, plug in the battery to the power box. The blue battery light on the battery turns on to indicate the remaining level.
shown in the figure. Step three: In PC’s network connection Settings of Windows system, select “Local connection” to connect the router of wireless adaptor, change the connection of TCP/IP Settings to automatically obtain IP address and DNS server address. Note: Use the router as is, DO NOT modify the router’s settings.DO NOT restore the factory default settings. To optimize the user experience, it is recommended to place the router in an open location without obstacles, with a 90-degree antenna.
2. Set up PC transmitter Set up the PC transmitter on the desktop and facing the game area, ensure there is no obstruction between PC transmitter and HMD receiver 3. Run wireless adaptor connection assistant Double-click the PC desktop client icon, then click “Start” after the client started. It will automatically test the environment of wireless adaptor working in turn. When wireless connection starts, please start Oculus home software. 4.
Children use: Children are not allowed to use this product. Please keep this product in appropriate locations beyond the reach of children, and do not grant access to children. If elder children are allowed to use this product, please do proceed under the close watch of adults. Recharging: The battery can be recharged with a regular cellular phone charger, and a charger of 2A is recommended to reduce the charging period. 9~12 hours will be needed to complete a single full charge.
Status of indicator/lamp Indicator Location Color Status Off Video signal HMD connection receiver Slow blinking Green Fast blinking indicator Video signal connection PC transmitter Power box lamp Battery charge lamp 13 Power box Portable power bank Off Power off or system standby Fast blinking Blue with the transmitter Video in transmission Slow blinking Red To be paired Successfully paired Normal light Green indicator Description Power off or system standby To be paired Success
