SIM3600 User Manual SIM3600 User Manual Rev 1 Beijing Xinlian Chuangzhan Electronic Technology Co., LTD Tel:（+86）010-62153842/62153840 http://www.silion.com.
SIM3600 User Manual Directory 1. A revision history ..................................................................................................................... 3 2. Product introduction ................................................................................................................. 4 3. Product features ....................................................................................................................... 4 4. Electrical characteristics ..........................
SIM3600 User Manual 1. A revision history Artificial The file number The version number V1.
SIM3600 User Manual 2. Product introduction The ultra small RFID module sim3600 is a cost-effective ultra-high frequency RFID reading and writing module developed by the technology team of SIMLINK innovation and exhibition based on Impinj's new generation of RF chip E310. The shape is only the size of a coin. It is designed to meet the needs of high-performance RFID handheld devices and mobile portable devices.
SIM3600 User Manual output 5 output power 27 dBm Output power accuracy +/- 1 dB Flatness of output power +/- 0.2 dB -68 dBm 300 tag/s 1000 tag label Profile1 Reception sensitivity Inventory label peak speed Label cache 96 bit EPC Logic level VIL，Input Low Voltage -0.5 0.8 V VIH，Input High Voltage 2 Vdd+0.5 V Storage temperature -40 85 ℃ Working temperature -20 55 ℃ 5.25 V Temperature range The input power 3.6 The power supply voltage 5.
SIM3600 User Manual 5. Pin configuration and function description The serial number define 1 2 3 VCC(+3.6 - 5V) 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Digital Output 2 （GPIO OUT2） Digital Input 1 （GPIO IN 1） Digital Input 2 （GPIO IN 2） GND EN module power enable (low voltage power failure, high voltage or suspended power on enable) RXD (DATA INPUT，TTL 电平) TXD (DATA OUTPUT，TTL 电平) Rst (low enable reset, no need to hang in the air) Digital Output 1 （GPIO OUT1） Module 3.
SIM3600 User Manual 6. The application of information The input power It is recommended to use 47~100uf tantalum capacitors to filter the VCC port, so as to reduce the traction on the power supply caused by the rapid opening and closing of the power amplifier duri ng RF transmission. The 0.1uf/100pf capacitor filters out the power supply ripple of different freque ncy bands respectively.
SIM3600 User Manual The antenna connection The output impedance of the antenna port is 50 ohms, and the antenna standing wave ratio is rec ommended to be less than 1.5. A better antenna standing wave ratio can get better card reading effect. Communication interface (rxd/txd) The communication interfaces RXD and TXD are at TTL level, and the default baud rate is 115200b ps 7. Physical properties Product size：21mm*21mm*3.4mm weight：2.5g 8 Peripheral Design Requirement 8.
SIM3600 User Manual interference received, including interference that may cause undesired operation. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
SIM3600 User Manual Modulation: ASK Host manufacturer must perfom test of radiated & conducted emission and spurious emission,etc according to the actual test modes for a stand-alone modular transmitter in a host.Only when all the test results of test modes comply with FCC requirements, then the end product can be sold legally. 2.10Additional testing Part15SubpartB disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized forthe specific rule parts (i.e.
