Device Device Overview Power button Charging port Indicator light Proximity sensor/ Ambient light sensor Volume button Microphone Type-c port HDMI port Tips Please do not block the area shown
Vertical/Horizontal 1.Vertical Touch Control Projection: Stand the device upright on a flat surface. After turn it on, you can perform touch control function in the projection area. *Please do not place any objects in the projection area or 5cm around and avoid strong light sources that shine on the projection area. 2.Horizontal Cinema Projection: Lay the device horizontally on a flat surface. After turn it on, you can project a large cinema-style screen on a wall or projection screen.
Power-on/Power-off/Screen-off Power-On: When the power is on, press and hold the power button for 3 seconds to turn it on. Power-Off: Press and hold the power button for 1.5 seconds and select Power Off in the shutdown menu that pops up. Screen-Off: When the screen is on, press the power button briefly to turn off the screen display. Auto Focus After the device turns on, it performs auto focus for a few seconds to adjust the image for a clear resolution.
Remote Control Physical Remote Control Bluetooth pairing: Please make sure the remote control is fully charged to ensure normal pairing. 1. Open the "application list > remote control pairing > physical remote control" page of the device. 2. Place the remote control close to the device 3. Press the Back and Menu keys until the red and blue indicator lights flash alternately 4.
What's in the Box Device User manual Warranty card Power cord Power adapter Remote control charging cable Remote control Precautions Do not point the projector at eyes, as it may cause injury. Do not obstruct the air inlet/outlet. Otherwise, abnormal heat ventilation may cause damage to the device. Do not place the device and the power adapter in areas with excessively high or low temperatures. The operation temperature should be -10℃~30℃, and the power adapter's should below 30℃.
