User's Manual

User Manual
Specifications
z Operating temperature: 0 ~ 50℃
z Weight: 485g
Features
z Using a keyboard, mouse, and display can be PS / 2. USB interface can control the four host.
z Simply plug the attached cables-nothing else required.( Cable length 1.2 meters)
z Full keyboard and mouse emulation for error-free booting.
z Hot key commands and LED indicators for computer selection.
z No software and power required.
z Support video resolution up to 1920 × 14 40.
z Compatible with all operating systems.
Installation
1. Make s ure that power t o a ll the devices you wil l be connecting to have bee n turned of f, an d tha t all de vices on th e
installation are properly grounded.
2. Plug your keyboard, mouse and monitor into the unit’s console ports.
3. Plug th e device’s b uilt-in cables i nto the keyboard, mouse and m onitor po rts o f your co mputers. The keyboard and the
mouse plugs are color-coded and marked with an indicator icon.
4. This completes the installation. Power on your computers and you are ready to go.
Operation
Toggle the KVM control between the computers by tapping the CTRL key Double-click.
FCC NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC NOTE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user's authority to operate the equipment.